Sorry, this offer is no longer available on Exapro

MAYPRO LCA-4

Here is a selection of similar machines

1 - CLA-4
The CLA-4 module, hydraulic pallet nailer, is a continuous cycle nailer
with two pallet assembly molds, the mold arrives by means of chains and stops
in the assembly position, when the operators have finished assembling the pallet
press the cycle start button and the pallet enters the nailing bridge where it will be
nailed, hydraulically, in three times, meanwhile the other mold has already been
placed in position and operators are preparing the next pallet.
Continuous cycle hydraulic nailer composed of:
 Hydraulic group with 20hp siemens motor.
 24 reinforced and thermally hardened nailers for a great
durability.
 2 nail boxes for 12 nails each, heat-hardened guides.
 Only 2 assembly moulds, this means that the pallet change time is
Reduce compared to conventional nailers by 66%.
 Pallet preparation system in a fixed position, without having to assemble the
pallet while the chains are running.
 Electrical panel with 10” touch screen.
 Communication router and online assistance.
 Electrical components, motors, pneumatic drives SIEMENS
Hydraulic power unit motor - 20hp
Chain motor 1 - 3hp
Chain motor 2 - 3hp
Nail box motor - 1hp
Side measure motor - 1hp
two
2 - VT-REG
The turner is pneumatically actuated with two transport chains
motorized, for moving the pallet in and out once it has been turned over. The flipped and
pallet transport is automated with the nailing line. The turner has two
possible settings, does not turn any pallets or turns them all. The turner chains
They are adjustable by means of a motor reducer and adjustable by screen.
Chain motor - 1.5hp
Side measure motor - 1hp
3 - M-EL
Pneumatic lift table module with two transport chains
motorized pallet entry. In the lifting table we nail the pallet by the part of
below being able to do it horizontally or diagonally (which is more practical), the module
It has a pneumatic cylinder that allows the elevation of said table, for nailing
in diagonal. When we finish the pallet, you only have to press the pedal that it has
with it, and the pallet will come out to enter the next module. chain synchronization
entry and exit of the pallet, is duly signaled and automated with the rest of the
nailing line modules. The nailing table chains are adjustable
by means of a motor reducer and adjustable by screen.
Chain motor - 1 hp
Lateral measure motor - 1h

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Length x width x height 3200.0 × 2500.0 × 2000.0
Weight 24000 kg
Worked hours 6000 hours
Hours under power
State good
At local norms ---------
Status in production
maypro-lca-4-p220518109_2.pdf Download
Client type User – large company
Active since 2022
Offers online 0
Last activity Dec. 23, 2022

Description

1 - CLA-4
The CLA-4 module, hydraulic pallet nailer, is a continuous cycle nailer
with two pallet assembly molds, the mold arrives by means of chains and stops
in the assembly position, when the operators have finished assembling the pallet
press the cycle start button and the pallet enters the nailing bridge where it will be
nailed, hydraulically, in three times, meanwhile the other mold has already been
placed in position and operators are preparing the next pallet.
Continuous cycle hydraulic nailer composed of:
 Hydraulic group with 20hp siemens motor.
 24 reinforced and thermally hardened nailers for a great
durability.
 2 nail boxes for 12 nails each, heat-hardened guides.
 Only 2 assembly moulds, this means that the pallet change time is
Reduce compared to conventional nailers by 66%.
 Pallet preparation system in a fixed position, without having to assemble the
pallet while the chains are running.
 Electrical panel with 10” touch screen.
 Communication router and online assistance.
 Electrical components, motors, pneumatic drives SIEMENS
Hydraulic power unit motor - 20hp
Chain motor 1 - 3hp
Chain motor 2 - 3hp
Nail box motor - 1hp
Side measure motor - 1hp
two
2 - VT-REG
The turner is pneumatically actuated with two transport chains
motorized, for moving the pallet in and out once it has been turned over. The flipped and
pallet transport is automated with the nailing line. The turner has two
possible settings, does not turn any pallets or turns them all. The turner chains
They are adjustable by means of a motor reducer and adjustable by screen.
Chain motor - 1.5hp
Side measure motor - 1hp
3 - M-EL
Pneumatic lift table module with two transport chains
motorized pallet entry. In the lifting table we nail the pallet by the part of
below being able to do it horizontally or diagonally (which is more practical), the module
It has a pneumatic cylinder that allows the elevation of said table, for nailing
in diagonal. When we finish the pallet, you only have to press the pedal that it has
with it, and the pallet will come out to enter the next module. chain synchronization
entry and exit of the pallet, is duly signaled and automated with the rest of the
nailing line modules. The nailing table chains are adjustable
by means of a motor reducer and adjustable by screen.
Chain motor - 1 hp
Lateral measure motor - 1h

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Length x width x height 3200.0 × 2500.0 × 2000.0
Weight 24000 kg
Worked hours 6000 hours
Hours under power
State good
At local norms ---------
Status in production

About this seller

Client type User – large company
Active since 2022
Offers online 0
Last activity Dec. 23, 2022