High-speed linear labelling machine NERO BL600 (build.year 2011) for applying self-adhesive wrap-around labels to vials, bottles or cylindrical containers.
Production:
A -The product enters the machine
B -A check is made in case there is insufficient product (Minimum Load)
C - From the belt, the product is taken to the grippers, which capture it.
D -The product is taken "in charge" by the system.
E -A sensor determines the stop of the label in the correct position.
F -Labelling, achieved by peeling the label off the backing at a sharp angle and adhesion by contact. G -A winder rotates the product, repeating the label over the entire surface.
H -Check for correct labelling
I -Extraction from the gripper.
J -Based on the check the product can be discarded.
K -Based on the check the product is accepted.
L -Exit of good product.
M -A check to see if there is excess product on exit (Maximum Load).
Technical data:
Label height 10 ÷ 60 mm;
Label length 13 ÷ 100 mm;
Maximum speed 600 pcs/min;
Maximum label speed 160 m/min;
Maximum roll diameter 400 mm;
Electrical standard 400 V - 50 Hz;
Power supply Installed power 5 kW;
Weight: 1000 kg approx.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Capacity units/hour 36000 u/h
Label length max 100 mm
Label width max 60 mm
-------------------
Weight 1000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status visible
Client type Reseller
Active since 2020
Offers online 301
Last activity March 28, 2024

Description

High-speed linear labelling machine NERO BL600 (build.year 2011) for applying self-adhesive wrap-around labels to vials, bottles or cylindrical containers.
Production:
A -The product enters the machine
B -A check is made in case there is insufficient product (Minimum Load)
C - From the belt, the product is taken to the grippers, which capture it.
D -The product is taken "in charge" by the system.
E -A sensor determines the stop of the label in the correct position.
F -Labelling, achieved by peeling the label off the backing at a sharp angle and adhesion by contact. G -A winder rotates the product, repeating the label over the entire surface.
H -Check for correct labelling
I -Extraction from the gripper.
J -Based on the check the product can be discarded.
K -Based on the check the product is accepted.
L -Exit of good product.
M -A check to see if there is excess product on exit (Maximum Load).
Technical data:
Label height 10 ÷ 60 mm;
Label length 13 ÷ 100 mm;
Maximum speed 600 pcs/min;
Maximum label speed 160 m/min;
Maximum roll diameter 400 mm;
Electrical standard 400 V - 50 Hz;
Power supply Installed power 5 kW;
Weight: 1000 kg approx.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Capacity units/hour 36000 u/h
Label length max 100 mm
Label width max 60 mm
-------------------
Weight 1000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2020
Offers online 301
Last activity March 28, 2024

Here is a selection of similar machines

Neri Marchesini BL600 Labeller