Set up for ALU/PVC and ALU/ALU operation

- Format range blister (W x L) min 50 x 22 mm / max. 156 x 115 mm
- Drawing depth max. 12 mm
- Output 15 - 50 forming cycles/min
- Transport length 42-115 mm
- Film width 100-168 mm
- Forming film Ø max. 450 mm, core Ø 76 mm (PVC)
- 150 mm (ALU), pneumatic clamped
- Cover film-Ø max. 240mm, core-Ø 76 mm, pneumatic clamped
- Adhesive bonding point detection for sealing and forming film
- Product feed by dedicated feeder Uhlmann SimTab 2.1 for tablets/capsules
- Forward feed after forming and sealing station
- Forming station with compressed air for PVC forming film
- Heating station with extraction for the use of PVDC film
- Mechanical forming station for ALU forming film
- Filling control VisioChrom color with separate screen
- Perforating station
- Chiller Autotherm AKL 44
- 6-channel printing recorder Jumo Logoprint 500
- Discharge conveyor with reject for bad blister
- Control rebuild 2009 to PLC B+R 2010 CP 100
- 8469 operating hours
- Drive 400V/50Hz
- IQ/OQ/DQ documentation
- Inspection of the machine is possible
- Tear and pore control for former film and cover film Visiotec VisioScan MT-160/200

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Moulding length 105 mm
Moulding width 30 mm
Forming depth 10 mm
Max foil width 156 mm
Cycle/min 50
Total power requirement 6 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Uhlmann UPS 300
Client type Consultant
Active since 2021
Offers online 1201
Last activity March 28, 2024

Description

Set up for ALU/PVC and ALU/ALU operation

- Format range blister (W x L) min 50 x 22 mm / max. 156 x 115 mm
- Drawing depth max. 12 mm
- Output 15 - 50 forming cycles/min
- Transport length 42-115 mm
- Film width 100-168 mm
- Forming film Ø max. 450 mm, core Ø 76 mm (PVC)
- 150 mm (ALU), pneumatic clamped
- Cover film-Ø max. 240mm, core-Ø 76 mm, pneumatic clamped
- Adhesive bonding point detection for sealing and forming film
- Product feed by dedicated feeder Uhlmann SimTab 2.1 for tablets/capsules
- Forward feed after forming and sealing station
- Forming station with compressed air for PVC forming film
- Heating station with extraction for the use of PVDC film
- Mechanical forming station for ALU forming film
- Filling control VisioChrom color with separate screen
- Perforating station
- Chiller Autotherm AKL 44
- 6-channel printing recorder Jumo Logoprint 500
- Discharge conveyor with reject for bad blister
- Control rebuild 2009 to PLC B+R 2010 CP 100
- 8469 operating hours
- Drive 400V/50Hz
- IQ/OQ/DQ documentation
- Inspection of the machine is possible
- Tear and pore control for former film and cover film Visiotec VisioScan MT-160/200

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Moulding length 105 mm
Moulding width 30 mm
Forming depth 10 mm
Max foil width 156 mm
Cycle/min 50
Total power requirement 6 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Consultant
Active since 2021
Offers online 1201
Last activity March 28, 2024

Here is a selection of similar machines

Used Uhlmann UPS 300 2002/2009 Blister Machine