FOUR SIDES MOULDER mod. FORMA 22-6
Machine frame
• Base in full cast-iron torsion free
• All tables and guides have rectified finishing
• Both the in-feed table, standard 2.000 mm. long, and the side fence are adjustable by means of a parallelogram system to guarantee quick and accurate positioning
• Full insulated sound proof cabin to guarantee max. safety for the worker and the lowest level noise
• Table lubrication by manual pump Controls
• All mechanical controls for setting and adjustment of the machine are positioned in-line on the front of the machine itself
• Any setting operation allowed by the safety rules when machine switched on can be executed from outside without opening the sound proof cabin
• Mechanical readout for any single adjustment
Feeding system
• The system is made by gears and cardan joints, without chains, both for upper rolls and feeding rolls underneath the working table
• Feeding motor with variable speed
• The toothed rolls are tempered and chromed
• Pre-feeding roll fitted before the first bottom horizontal cutter-head
• Pneumatic pressure on all the feeding system, divided in sections for toothed and rubber rolls
• Additional device for short pieces
• Pressing pad in exit of the top horizontal spindle made in sections and adjustable on the tools diameter
• Digital readout of the feeding height
• Electrical lifting
In-feed table 2.000 mm
Working width mm. 20 ÷220
Working height mm. 8 ÷120
Spindles diameter mm. 40
Spindles rotation speed 6.000 r.p.m. Working spindles
Bottom horizontal:
motor kw 5,5 (hp 7,5)
tool diameter capacity mm. 125 ÷ 145 rebating cutter tool
Right vertical:
motor kw 5,5 (hp 7,5)
tool diameter capacity mm. 115 ÷ 180 vertical adjustment mm. 35
Left vertical:
motor kw 5,5 (hp 7,5)
tool diameter capacity mm. 115 ÷ 180 Top horizontal:
motor kw 5,5 (hp 7,5)
tool diameter capacity mm. 115 ÷ 180
Universal:
motor kw 5,5 (hp 7,5)
tool diameter capacity mm. 115 ÷ 180
Set of spacers rings for all spindle
Feeding system:
motor kw 4 (hp 5,5) speed m/min 5÷24

Device for sort pieces
CE mark

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Working width 220 mm
Working height 120 mm
Shafts diameter 40 mm
Sound proof cabin Yes
Feeding table length 2000 mm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible
Client type Reseller
Active since 2019
Offers online 1
Last activity Oct. 11, 2023

Description

FOUR SIDES MOULDER mod. FORMA 22-6
Machine frame
• Base in full cast-iron torsion free
• All tables and guides have rectified finishing
• Both the in-feed table, standard 2.000 mm. long, and the side fence are adjustable by means of a parallelogram system to guarantee quick and accurate positioning
• Full insulated sound proof cabin to guarantee max. safety for the worker and the lowest level noise
• Table lubrication by manual pump Controls
• All mechanical controls for setting and adjustment of the machine are positioned in-line on the front of the machine itself
• Any setting operation allowed by the safety rules when machine switched on can be executed from outside without opening the sound proof cabin
• Mechanical readout for any single adjustment
Feeding system
• The system is made by gears and cardan joints, without chains, both for upper rolls and feeding rolls underneath the working table
• Feeding motor with variable speed
• The toothed rolls are tempered and chromed
• Pre-feeding roll fitted before the first bottom horizontal cutter-head
• Pneumatic pressure on all the feeding system, divided in sections for toothed and rubber rolls
• Additional device for short pieces
• Pressing pad in exit of the top horizontal spindle made in sections and adjustable on the tools diameter
• Digital readout of the feeding height
• Electrical lifting
In-feed table 2.000 mm
Working width mm. 20 ÷220
Working height mm. 8 ÷120
Spindles diameter mm. 40
Spindles rotation speed 6.000 r.p.m. Working spindles
Bottom horizontal:
motor kw 5,5 (hp 7,5)
tool diameter capacity mm. 125 ÷ 145 rebating cutter tool
Right vertical:
motor kw 5,5 (hp 7,5)
tool diameter capacity mm. 115 ÷ 180 vertical adjustment mm. 35
Left vertical:
motor kw 5,5 (hp 7,5)
tool diameter capacity mm. 115 ÷ 180 Top horizontal:
motor kw 5,5 (hp 7,5)
tool diameter capacity mm. 115 ÷ 180
Universal:
motor kw 5,5 (hp 7,5)
tool diameter capacity mm. 115 ÷ 180
Set of spacers rings for all spindle
Feeding system:
motor kw 4 (hp 5,5) speed m/min 5÷24

Device for sort pieces
CE mark

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Working width 220 mm
Working height 120 mm
Shafts diameter 40 mm
Sound proof cabin Yes
Feeding table length 2000 mm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2019
Offers online 1
Last activity Oct. 11, 2023

Here is a selection of similar machines

FOUR SIDES MOULDER mod. FORMA 22/6