Price on request
Make an offer| Manufacturer | Lasco |
|---|---|
| Model | SPR2500 |
| Year | 1990 |
| Location | India
|
| Category | Miscellaneous presses and forging machines |
| Product id | P260312641 |
| Language |
Преса Lasco SPR2500
Lis Lasco SPR2500
Lasco SPR2500 Presse
Lasco SPR2500 Presse
Πρέσα Lasco SPR2500
Lasco SPR2500 Press
Prensa Lasco SPR2500
Presse Lasco SPR2500
Preša Lasco SPR2500
Lasco SPR2500 Prés
Pressa Lasco SPR2500
Lasco SPR2500 Presas
Lasco SPR2500 Pers
Prasa Lasco SPR2500
Prensa Lasco SPR2500
Prese Lasco SPR2500
Lasco SPR2500 Пресс
Presa Lasco SPR2500
Lasco SPR2500 Press
Pres Lasco SPR2500
|
| Force | T |
| Stroke length | 650 mm |
| Table length | mm |
| Table width | mm |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Lasco SPR2500 |
| Last availability date | 02/04/2026 |
This listing is for a Lasco SPR2500 forging press manufactured in 1990. The press has a nominal press force capacity of 2500 tons (25 MN) with a permanently permissible press force of 40 MN and an impact blow force reaching up to 50 MN. It delivers a gross energy of 500 kJ per stroke and features a ram stroke length of 650 mm, with a stroke rate of 20 strokes per minute. The stroke to achieve maximum forming energy is 550 mm. The machine includes a screw diameter of 530 mm and ram dimensions of 1250 mm width by 1400 mm depth. The maximum distance between the press table and ram is 2000 mm, with daylight between guides measuring 1500 mm and a width between lateral windows of 800 mm. The total height of the press is approximately 10 meters, and the press weighs around 200 tons.
The control system and motor drive are German-made. The main motor output is 400 kW times two, and the machine includes a slipping clutch in the flywheel system. The blow energy is programmable for each stroke, adjustable between 5% and 100%, and the stroke program can be preset. Peripheral equipment such as die lubrication can be controlled through the system. The ejector force is 63 tons with a stroke length of 250 mm, and a crane capacity of 20 tons with a hook height of around 10 meters is required for servicing the ram and screw.
The machine is equipped with safety features including yellow safety railings on the upper platform and protective fencing around the base. A control panel with multiple buttons is mounted on the front side for operation. The press shows signs of use with visible wear and dirt on surfaces. Two large cylindrical metal shafts with blue flanges are part of the equipment, exhibiting some wear and rust patches. The brand name 'Lasco' is visible on the front of the machine. Overall, the press is in good condition and suitable for heavy forging applications requiring high force and programmable control.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Forging Equipment
Capacity : 2500 tons,
Nominal press force : 25 MN,
Permanently permissible press force : 40 MN,
Impact blow force : 50 MN,
Gross energy SPR SERIES : 500 kj,
Ram stroke : 650 mm,
Stroke per minutes : 20,
Stroke to achieve the maximum forming energy : 550 mm,
Screw diameter : 530 mm,
Ram width / ram depth : 1250/1400 mm,
Ma. distance press table /ram : 2000 mm,
Daylight between guides : 1500 mm,
Width between lateral windows : 800 mm,
Total height : 10 m,
Press total weight : 200 tons.
- Control system & Motor Drive . GERMAN – GERMAN
- Are the motors Servo Driven with cooling system? NO
- Are pinions integral part of Rotor? CHECK DURING YOUR VISIT
- Main motor Output. 400 KW X 2
- Is the Break mechanism regenerative type ? NO
- Is slipping clutch in flywheel system available? YES
- Brief about backlash elimination process between pinion & Main gear. NO CLEAR
- Is feedback system through rotary encoder? NO
- Ejector force & stroke length. 63 TN/10 TN – 250 MM/50MM
- Crane Capacity & Height from floor to hook required for Ram & Screw Service. 20 TN / AROUND 10 MT
- Presetting of stroke program. YES
- Is the Blow energy programmable for each single stroke between 5% & 100 %. YES
- Control of peripheral equipment, for example die lubrication. YES
Item Condition: Good condition
Capacity Tons: 2500
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Forging Equipment
Capacity : 2500 tons,
Nominal press force : 25 MN,
Permanently permissible press force : 40 MN,
Impact blow force : 50 MN,
Gross energy SPR SERIES : 500 kj,
Ram stroke : 650 mm,
Stroke per minutes : 20,
Stroke to achieve the maximum forming energy : 550 mm,
Screw diameter : 530 mm,
Ram width / ram depth : 1250/1400 mm,
Ma. distance press table /ram : 2000 mm,
Daylight between guides : 1500 mm,
Width between lateral windows : 800 mm,
Total height : 10 m,
Press total weight : 200 tons.
- Control system & Motor Drive . GERMAN – GERMAN
- Are the motors Servo Driven with cooling system? NO
- Are pinions integral part of Rotor? CHECK DURING YOUR VISIT
- Main motor Output. 400 KW X 2
- Is the Break mechanism regenerative type ? NO
- Is slipping clutch in flywheel system available? YES
- Brief about backlash elimination process between pinion & Main gear. NO CLEAR
- Is feedback system through rotary encoder? NO
- Ejector force & stroke length. 63 TN/10 TN – 250 MM/50MM
- Crane Capacity & Height from floor to hook required for Ram & Screw Service. 20 TN / AROUND 10 MT
- Presetting of stroke program. YES
- Is the Blow energy programmable for each single stroke between 5% & 100 %. YES
- Control of peripheral equipment, for example die lubrication. YES
Item Condition: Good condition
Capacity Tons: 2500
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Force | T |
| Stroke length | 650 mm |
| Table length | mm |
| Table width | mm |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Lasco SPR2500 |
| Last availability date | 02/04/2026 |
This listing is for a Lasco SPR2500 forging press manufactured in 1990. The press has a nominal press force capacity of 2500 tons (25 MN) with a permanently permissible press force of 40 MN and an impact blow force reaching up to 50 MN. It delivers a gross energy of 500 kJ per stroke and features a ram stroke length of 650 mm, with a stroke rate of 20 strokes per minute. The stroke to achieve maximum forming energy is 550 mm. The machine includes a screw diameter of 530 mm and ram dimensions of 1250 mm width by 1400 mm depth. The maximum distance between the press table and ram is 2000 mm, with daylight between guides measuring 1500 mm and a width between lateral windows of 800 mm. The total height of the press is approximately 10 meters, and the press weighs around 200 tons.
The control system and motor drive are German-made. The main motor output is 400 kW times two, and the machine includes a slipping clutch in the flywheel system. The blow energy is programmable for each stroke, adjustable between 5% and 100%, and the stroke program can be preset. Peripheral equipment such as die lubrication can be controlled through the system. The ejector force is 63 tons with a stroke length of 250 mm, and a crane capacity of 20 tons with a hook height of around 10 meters is required for servicing the ram and screw.
The machine is equipped with safety features including yellow safety railings on the upper platform and protective fencing around the base. A control panel with multiple buttons is mounted on the front side for operation. The press shows signs of use with visible wear and dirt on surfaces. Two large cylindrical metal shafts with blue flanges are part of the equipment, exhibiting some wear and rust patches. The brand name 'Lasco' is visible on the front of the machine. Overall, the press is in good condition and suitable for heavy forging applications requiring high force and programmable control.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
EN
- Languages
English (GB)