|Length x width x height||2600.0 mm × 1450.0 mm × 2050.0 mm|
|Hours under power|
|At local norms||---------|
|Status||visible but unplugged|
LABOTRADE Model C-20
Includes control unit and INOXPA pump. Mounted on stainless steel base with wheels. Sale by state
External dimensions (mm): 1,450 x 2,600 base x 2,050 high
Reactor of 1000 L with resistance and mouth of Ø 430 mm
The CIP Cleaning Control is an open system, capable of cleaning tanks, pipes, and equipment, in both Cold CIP and Hot CIP mode.
It is a customized system, suitable to adapt to different types and quantities of cleaning products, according to the needs of each industry.
It is based on a Send and Return procedure, this involves the recovery of a large part of the cleaning products. In addition, it has the impulse / pause method for washing tanks or equipment; this grants a consummate and uniform cleaning of the walls of the containers by an intermittent rain that does not allow the stagnation of the cleaning products in them.
Cleaning systems C.I.P .: no need to disassemble the production system
The cleaning system C.I.P. (clearing in place) is based on cleaning the production equipment without dismantling, which is a significant advantage over traditional cleaning systems.
The system consists of circulating through the system of tanks and process lines a series of cleaning and disinfection solutions in a closed circuit from some preparation tanks of these solutions, according to sequences and times established a priori. These systems support a high degree of automation, but they can also be configured to work manually.
The purpose of the cleaning system C.I.P. is to eliminate organic compounds from the process since they are the basis for the growth of bacteria and precursors of biocorrosion phenomena. The cleaning of tanks and pipes is a chemical cleaning based on the parameters; concentration and types of cleaning agents, temperature and time. The dirt dissolves chemically and the speed of the fluid must be adequate for the discharge of the particles detached from the dirt. The washing programs will depend on the product and sanitary requirements.
The solution C.I.P. it is prepared by adding the reagent to the formulation tank and recirculating the solution through the process plant through the centrifugal pump that is placed parallel to the pump of the product. The reagent is dosed in a tank by means of a dosing pump and at the same time water is added so that the desired concentration can be achieved. Once the necessary concentration of the product has been achieved, the control system will detect it and give notice that it has finished with the preparation step of the dissolution.
Applications for which it is indicated
Highly configurable system in rinse cycles, acid and base.
With recovery of optional cleaning solution.
Please note that this description may have been translated automatically. Contact us for further information.