Preheater VN 1000, year 2008

Automatic continuously operating with the size of the foaming vessel 975x3000 mm,
Stirrer drive power 15 kW
Shift of the discharge bar in 3 positions from 1500 mm to 2700 mm
on:
- made of stainless steel
- preliminary bunker for raw materials 250 l,
- dosing screw adjustable
- foaming vessel with heat insulation
  layer to reduce condensation
- heated bottom of the chamber with on / off. To shorten
  condensation
- mixer with stainless steel breakers,
  chrome
- removable, fixed breaker,
- precise dosing of the chamber with an adjustable auger and
  dosing funnel,
- safety device when disconnected
  electric current
- detached electronic control unit,
- bimetal thermometer inside the blowing agent.
The performance of the blowing agent depends on the quality of the feedstock, with a European material standard:
- at a density of 15 g / liter: 900 kg / h
                           20 g / liter: 1200 kg / h
                           25 g / liter: 1350 kg / hour

Feed Screw

Fluid Bed Dryer
for constant drying and stabilization
fresh foam material
on
Screening device, gateway drum, air blower for transporting material over a distance
Air power 3 kW
Productivity with 20 kg / m³ 1500kg / hour

Bunker for the supply of raw materials 1000 kg

Steam hood

Manual air mixing
for high densities (over 30 kg / m³)

Secondary Foaming Device
on Silo, volume 5 m³
with a productivity of 16-90 m3 / hour
Device for automatic density determination and density control
Preheat programs with automatic start

Automatic device to protect the fluidized bed dryer from overflow with disconnection of the pre-expander when the dryer overflows

Device for full discharge of residual material, with automatic shutdown
Screw for feeding raw materials from the mixer for coloring raw materials

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Volume 250 L
-------------------
Weight 6000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type User – large company
Active since 2019
Offers online 3
Last activity June 17, 2023

Description

Preheater VN 1000, year 2008

Automatic continuously operating with the size of the foaming vessel 975x3000 mm,
Stirrer drive power 15 kW
Shift of the discharge bar in 3 positions from 1500 mm to 2700 mm
on:
- made of stainless steel
- preliminary bunker for raw materials 250 l,
- dosing screw adjustable
- foaming vessel with heat insulation
  layer to reduce condensation
- heated bottom of the chamber with on / off. To shorten
  condensation
- mixer with stainless steel breakers,
  chrome
- removable, fixed breaker,
- precise dosing of the chamber with an adjustable auger and
  dosing funnel,
- safety device when disconnected
  electric current
- detached electronic control unit,
- bimetal thermometer inside the blowing agent.
The performance of the blowing agent depends on the quality of the feedstock, with a European material standard:
- at a density of 15 g / liter: 900 kg / h
                           20 g / liter: 1200 kg / h
                           25 g / liter: 1350 kg / hour

Feed Screw

Fluid Bed Dryer
for constant drying and stabilization
fresh foam material
on
Screening device, gateway drum, air blower for transporting material over a distance
Air power 3 kW
Productivity with 20 kg / m³ 1500kg / hour

Bunker for the supply of raw materials 1000 kg

Steam hood

Manual air mixing
for high densities (over 30 kg / m³)

Secondary Foaming Device
on Silo, volume 5 m³
with a productivity of 16-90 m3 / hour
Device for automatic density determination and density control
Preheat programs with automatic start

Automatic device to protect the fluidized bed dryer from overflow with disconnection of the pre-expander when the dryer overflows

Device for full discharge of residual material, with automatic shutdown
Screw for feeding raw materials from the mixer for coloring raw materials

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Volume 250 L
-------------------
Weight 6000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type User – large company
Active since 2019
Offers online 3
Last activity June 17, 2023

Here is a selection of similar machines

Kurtz VN 1000 Blowmoulding machine