Manufacturer Kuka
Model RS 12
Year 2010
Location Germany DE
Category Others
Product id P90417043

Price on request

Contact the seller

You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller

Client type Reseller
Active since 2018
Offers online 17
Last activity Oct. 29, 2020

Specifications

-------------------
Worked hours
Hours under power
State excellent
At local norms yes
Status

Description

Friction
Make KUKA
Type RS 12
Year Built 2010
machine data
Max. Friction force 81 kN at 100 bar
Min. Friction force 5.7 kN at 7 bar
Max. Compression force 120 kN at 148 bar
Max. Spindle speed 2,500 min-1
Max. Carriage stroke 400 mm
Spindle drive rated power 147 kW
(frequency-controlled three-phase motor)

Electrical connection values
Rated voltage 400 V / 50 Hz
Max. Connected load 250 kVA
Average power requirement 50 kW
Average operating current 250 A
Backup fuse 630 A slow
Cable cross section 240 mm2

machine control
Electric control:
- SIEMENS S7 - CPU 317-PN / DP (with Profibus and Ethernet)
- Control programmed in STEP 7 with GRAPH 7 sequencers
- Hydraulic system: Fabr. REXROTH
- Main pump: make PARKER
- Spindle drive: make LENZE incl. Inverter (147 kW)

Basic equipment:
- Active TFT color display 12 inches
- Membrane keyboard with full character set
- Menu selection
- Display during monitoring. During the welding process, the actual values are both
  can be displayed digitally as well as in analogue graphs. This device allows a visual
  Control of the welding process of the machine and the monitoring device.
- Machine and monitoring values for 128 programs (additional programs on diskette
  possible)
- Interface for printers. With the printer, all set machine parameters,
  Monitoring limits and for each weld all actual values are logged.
- All welds are identified by serial numbers. In addition, the
  Counter readings for good parts, rejects and aborted welding attempts, too short or
  printed too long components.
- single-cell expression and / or curve expression
- Storage of the actual values of the last 16 parts
- Floppy disk drive for archiving 128 welding programs per floppy disk
- Printout of the program overview of all 128 programs
- Printout of the message buffer (last 200 messages)

Following tolerance limits are freely adjustable:
- Max. and min. common relative output length, the so-called initial position of the two
  Components in 0.01 mm
- Max. and min. Spindle speed During the friction phase in min-1
- Max. and min. Frictional pressure during the friction phase in bar
- Max. and min. Friction path (friction shortening) at the end of the friction phase in 0.01 mm

- Max. and min. Time of the friction phase in 0.001 sec
- Max. and min. Compression pressure during the compression phase in bar
- Max. and min. Total shortening after welding in 0,01 mm
- Brake phase monitoring (time and average pressure)
- if necessary, max. and min. Angular position after the positioned friction welding
- Max. and min. common relative final length, the so-called end position in 0.01 mm

Clamping tools rotary - fixed
Collet chuck for the rotating part in special design for max. Shaft length 160 mm at
Max. Diameter 28 mm

Special clamping block with centering movement for the fixed part, designed for diameter
32 - 70 mm, head length max. 40 mm

Equipment, accessories
- KUKA friction welding machine RS 12 - short version
- Machine control with control cabinet
- Operator panel PC 677B with step sequence diagnostics
- Parameter monitoring device PCD 314
- Remote diagnosis
- Camless slide control
- Clamping tools rotary - fixed
- Safety device
- Automatically operated operating door
- Heating for the hydraulic system
- Fluid grease lubrication
- Scanner integrated in RS 12
- Special drive 147 kW
- CE conformity declaration

The cooling of the main engine and control cabinet was done by decentralized dhw-cooling, and must be ensured if necessary by a new cold water device.

Please note that this description may have been translated automatically. Contact us for further information.

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines

Share

Contact the seller