Measures and weight:
Total height: mm
Ges. Length: mm
Variopack packer: approx. 3600 kg
Shrink tunnel: approx. 2500 kg
Type: 72 / 1-45-4500-S
Year of construction: 2004
Floor load: (≈ 4 x 6250) N
Alignment angle: ± 1 °
0 <82 dB (Lam, DIN 45635-T1-1-KI2)
Operating voltage: 230/400 V
Control voltage: 24V / DC
Main fuse: max. 125 A
Rated current: 100 A
Rated power: 69 KVA
Frequency: 50 Hz
Circuit diagram no. 2004.ST72-45.902
Vario Pack Packers:
Type: Variopack Compact TFS 30
Voltage: 230/400 V ± 5%
Frequency: 50Hz ± 2%
Power rating: ~ 16 KVA
-Wirkleistung: ~ 16 KW
Overpressure: min. 5 bar / max. 6 bar
Dew point: -5 ° C
Filter: 40 micro
Air consumption: max. 6.7 Nm3 / h
Floor load: ~ 6 x 5000 N + 2 x 6500 N + 2 x 1500 N
Alignment angle: ± 1 °
Volume level: = <85 dB
The workplace-related emission value is between 75 and 85 dB (A) + - 2 dB measurement tolerance, measured according to DIN EN 11204 accuracy class 2.
Note: This value may increase or decrease depending on the container / container to be processed and the machine performance / building acoustics.
The safety devices comply with European law and the generally accepted rules of technology.
Type: cans, glass, PET, packs
Diameter: 50-110 mm
Height: 70-360 mm
Transverse to the direction: 240-450 mm
In running direction: 110-350 mm
Transverse to the direction: 185-610 mm
In running direction: 120-510 mm
Thickness: 40-80 ± 5 micrometer
Roll diameter: -500 mm
Core diameter: 76 + 3 / -2 mm
Width: 700 mm
Width (two lanes): 2x340 = 680 mm
Edge profile (deviation): ± 1.5 mm
Fine wave (B wave), single-wave
Standard quality VDW 1.2 or 1.3
Buzzer of basis weights 250-300 g / m2
Wave height 2.2-3.0 mm, wave pitch 5.5-6.5 mm
Interior and exterior ceilings should be 'kraftliner'.
Permissible deflection of the box:
Max. Deflection x = 2.0% of the blank length or blank width.
The permissible tolerances with regard to the geometric dimensions must be less than 0.5%!
Execution of beer grooves:
The beer grooves must be so pronounced that the restoring forces do not re-set the box after kinking. On the other hand, the bending groove must not be so pronounced that the cardboard collapses when bent.
Execution of the punched out:
The cutouts must go over the inner bending groove, so that the lid can be easily bent.
Please note that this description may have been translated automatically. Contact us for further information.