47,500 €
Make an offerContact us to receive an offer.
| ------------------- | |
| worked hours | |
| hours under power | 0 hours |
| state | good |
| At local norms | yes |
| status | under power |
| Last availability date | 17/02/2026 |
This offering includes a set of 12 horizontal spool unwinders and 12 horizontal rewinders, both designed and manufactured by Kistner Anlagenbau GmbH in 2012. The unwinders are of the HA 800 F type, featuring a horizontal deflector and driven with a flying shaft. They accommodate wire diameters ranging from 0.6 to 2.0 mm, suitable for steel and non-ferrous metal wires with a maximum tensile strength of 1400 N/mm². The maximum dynamic voltage (DV) is 60, and the pay-off speed ranges from 5 to 120 m/min. Each uncoiler is powered by a 3.0 kW frequency-controlled drive operating at 1500 rpm, contributing to a total installed power of 50 kW. The spool flange diameter is 800 mm (DIN 46395), with a coil core diameter of 400 mm and a bore diameter of 127 mm featuring a 30 mm chamfer. The dancer mechanism provides approximately 200 mm of travel with a 300 mm diameter roller, controlled by air pressure. The machine frame is constructed from sturdy steel with solid welded construction, and the system requires compressed air at 6 bar. The net weight of the unwinders is approximately 9,600 kg, and each spool can hold up to 900 kg of wire.
The 12 horizontal rewinders, model HS 800, support the same wire diameter and material specifications as the unwinders, with a spooling speed range of 2 to 120 m/min and a constructive winding force between 30 and 250 N. Each rewinder is equipped with a 3.0 kW drive at 1500 rpm, totaling 50 kW of power. The rewinders include deflection pulleys and comb rollers with diameters of 300 mm, the former equipped with an incremental encoder. The net weight of the rewinders is about 12,000 kg. The spool dimensions are consistent with the unwinders, featuring 800 mm flange diameter, 400 mm coil core diameter, and 127 mm bore diameter with a 30 mm chamfer. Installation width is 500 mm, and total bobbin width is 600 mm.
Included are 12 spools/divisible spools with the same dimensions, suitable for the specified wire diameters and weights.
The machine is enclosed in a yellow metal frame with safety fencing, housing multiple large metal reels or spools within each section. The overall condition appears clean and well-maintained, with no visible damage. Additionally, a wire butt welding machine from Company Strecker GmbH, also manufactured in 2012, is part of the package.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
12 pcs. Horizontal spool unwinder type HA 800 F driven with horizontal deflector.
Wire diameter range: 0,6-2,0 mm. Wire material: steel, non-ferrous metals. Wire strength: max. 1400 N/mm². Max DV: 60. Pay-off speed: 5 - 120 m/min. Drive power: 3.0 kW frequency controlled at 1500 min-1 - per spooler. Total power: 50 kW. Flange diameter: 800 mm (DIN 46395). Dancer travel: approx. 200 mm. Dancer roller Ø: 300 mm. Control to dancer roller: air pressure. Net weight: approx. 9,600 kg. Year of manufacture: 2012. capacity of filled spool: max 900 kg. Coil core Ø: 400 mm. Bore-Ø: 127 mm, chamfer 30 mm. Installation width: 500 mm. Total bobbin width: 600 mm. Machine frame: Sturdy steel frame in solid welded construction. Compressed air: 6 bar
12 pcs. Horizontal rewinder type HS 800
Wire diameter range: 0,6-2,0 mm. Wire material: steel, non-ferrous metals. Wire strength: max. 1400 N/mm².Max DV: 60. Spooling speed range: 2 - 120 m/min. Constructive winding force: approx. 30 - 250 N. Drive power: 3.0 kW at 1500 min-1 - per spooler. Total power: 50 kW. Flange diameter: 800 mm (DIN 46395). Deflection pulley Ø: 300 mm (with attached incremental encoder). Comb rollers Ø: 300 mm (two rows). Net weight: 12,000 kg. Year of construction: 2012. Capacity of filled spool: max 900 kg. Coil core Ø: 400 mm. Bore-Ø: 127 mm, chamfer 30 mm. Installation width: 500 mm. Total bobbin width: 600 mm. Machine frame: Sturdy steel frame in solid welded construction.
12 pcs. spools Ø 800 mm (DIN 46395).
Flange diameter: 800 mm. Coil core Ø: 400 mm. Bore-Ø: 127 mm, chamfer 30 mm. Installation width: 500 mm. Total coil width: 600 mm.
12 pcs. divisible spools Ø 800 mm.
Flange diameter: 800 mm. Coil core Ø: 400 mm. Bore-Ø: 127 mm, chamfer 30 mm. Installation width: 500 mm. Total spool width: 600 mm.
Wire butt welding machine
Manufacturer: CompanyStreckerGmbH. Year of manufacture: 2012.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 2 |
| Last activity | Sept. 13, 2025 |
12 pcs. Horizontal spool unwinder type HA 800 F driven with horizontal deflector.
Wire diameter range: 0,6-2,0 mm. Wire material: steel, non-ferrous metals. Wire strength: max. 1400 N/mm². Max DV: 60. Pay-off speed: 5 - 120 m/min. Drive power: 3.0 kW frequency controlled at 1500 min-1 - per spooler. Total power: 50 kW. Flange diameter: 800 mm (DIN 46395). Dancer travel: approx. 200 mm. Dancer roller Ø: 300 mm. Control to dancer roller: air pressure. Net weight: approx. 9,600 kg. Year of manufacture: 2012. capacity of filled spool: max 900 kg. Coil core Ø: 400 mm. Bore-Ø: 127 mm, chamfer 30 mm. Installation width: 500 mm. Total bobbin width: 600 mm. Machine frame: Sturdy steel frame in solid welded construction. Compressed air: 6 bar
12 pcs. Horizontal rewinder type HS 800
Wire diameter range: 0,6-2,0 mm. Wire material: steel, non-ferrous metals. Wire strength: max. 1400 N/mm².Max DV: 60. Spooling speed range: 2 - 120 m/min. Constructive winding force: approx. 30 - 250 N. Drive power: 3.0 kW at 1500 min-1 - per spooler. Total power: 50 kW. Flange diameter: 800 mm (DIN 46395). Deflection pulley Ø: 300 mm (with attached incremental encoder). Comb rollers Ø: 300 mm (two rows). Net weight: 12,000 kg. Year of construction: 2012. Capacity of filled spool: max 900 kg. Coil core Ø: 400 mm. Bore-Ø: 127 mm, chamfer 30 mm. Installation width: 500 mm. Total bobbin width: 600 mm. Machine frame: Sturdy steel frame in solid welded construction.
12 pcs. spools Ø 800 mm (DIN 46395).
Flange diameter: 800 mm. Coil core Ø: 400 mm. Bore-Ø: 127 mm, chamfer 30 mm. Installation width: 500 mm. Total coil width: 600 mm.
12 pcs. divisible spools Ø 800 mm.
Flange diameter: 800 mm. Coil core Ø: 400 mm. Bore-Ø: 127 mm, chamfer 30 mm. Installation width: 500 mm. Total spool width: 600 mm.
Wire butt welding machine
Manufacturer: CompanyStreckerGmbH. Year of manufacture: 2012.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | 0 hours |
| state | good |
| At local norms | yes |
| status | under power |
| Last availability date | 17/02/2026 |
This offering includes a set of 12 horizontal spool unwinders and 12 horizontal rewinders, both designed and manufactured by Kistner Anlagenbau GmbH in 2012. The unwinders are of the HA 800 F type, featuring a horizontal deflector and driven with a flying shaft. They accommodate wire diameters ranging from 0.6 to 2.0 mm, suitable for steel and non-ferrous metal wires with a maximum tensile strength of 1400 N/mm². The maximum dynamic voltage (DV) is 60, and the pay-off speed ranges from 5 to 120 m/min. Each uncoiler is powered by a 3.0 kW frequency-controlled drive operating at 1500 rpm, contributing to a total installed power of 50 kW. The spool flange diameter is 800 mm (DIN 46395), with a coil core diameter of 400 mm and a bore diameter of 127 mm featuring a 30 mm chamfer. The dancer mechanism provides approximately 200 mm of travel with a 300 mm diameter roller, controlled by air pressure. The machine frame is constructed from sturdy steel with solid welded construction, and the system requires compressed air at 6 bar. The net weight of the unwinders is approximately 9,600 kg, and each spool can hold up to 900 kg of wire.
The 12 horizontal rewinders, model HS 800, support the same wire diameter and material specifications as the unwinders, with a spooling speed range of 2 to 120 m/min and a constructive winding force between 30 and 250 N. Each rewinder is equipped with a 3.0 kW drive at 1500 rpm, totaling 50 kW of power. The rewinders include deflection pulleys and comb rollers with diameters of 300 mm, the former equipped with an incremental encoder. The net weight of the rewinders is about 12,000 kg. The spool dimensions are consistent with the unwinders, featuring 800 mm flange diameter, 400 mm coil core diameter, and 127 mm bore diameter with a 30 mm chamfer. Installation width is 500 mm, and total bobbin width is 600 mm.
Included are 12 spools/divisible spools with the same dimensions, suitable for the specified wire diameters and weights.
The machine is enclosed in a yellow metal frame with safety fencing, housing multiple large metal reels or spools within each section. The overall condition appears clean and well-maintained, with no visible damage. Additionally, a wire butt welding machine from Company Strecker GmbH, also manufactured in 2012, is part of the package.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 2 |
| Last activity | Sept. 13, 2025 |
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Gebrauchte 12 Stck. Horizontal Abwickler + 12 Stck. Horizontal Aufwickler + 12 Stck. Spulen Ø 800 mm + 12 Stck. teilbare Spulen Ø 800 mm + Drahtstumpfschweißmaschine in Hagen
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Used Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
Kistner Anlagenbau GmbH Horizontal Abwickler / Aufwichler mit fliegender Welle
EN
- Languages
English (GB)