Sorry, this offer is no longer available on Exapro

Karl Mayer RS3 MSU-N 176’’ E12/E6 Flat knitting machine

Here is a selection of similar machines

Karl Mayer RS3 MSU-N 176’’ E12/E6
This knitting machine was fully reconditioned in 2016 by SITM (Schinasi International Textile Machine). Practically, the machine is like a new one.

I have to mention the following:

• The machine is working properly and has a high productivity (700 rpm)
• The machine has a wide range of application (shading nets, building protect mesh, etc ...)
• The machine has a modern operator interface

The above mentioned equipment has the following components:

1. Warp Beam Frame, 2 x 21" separation - 1 pcs
2. Bars for supporting rolls with diameters of 152 mm - 2 pcs
3. Model discs for fiberglass mesh manufacturing - 3 pcs
4. E18’bar with new needles - 4 pcs
5. Bar for closing links - 1 pcs
6. Guide bars with new fabric needles - 3 pcs
7. Stitch comb bar - 1 pcs
8. EBC -EBA for run-in yarns - 1 pcs
9. Frequency adjustment device, including the start-stop software - 1 pcs
10. Frame with distributors for roving threads - 1 pcs
11. Electric panel with 10,4'' touchscreen and 2016 updated software - 1 pcs
12. Dosing device - 1 pcs

Working speed - 700 RPM

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Gauge 12
Width 176 mm
-------------------
Length x width x height 7100.0 × 4500.0 × 2700.0
Weight 220000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type User – large company
Active since 2018
Offers online 0
Last activity March 24, 2022

Description

Karl Mayer RS3 MSU-N 176’’ E12/E6
This knitting machine was fully reconditioned in 2016 by SITM (Schinasi International Textile Machine). Practically, the machine is like a new one.

I have to mention the following:

• The machine is working properly and has a high productivity (700 rpm)
• The machine has a wide range of application (shading nets, building protect mesh, etc ...)
• The machine has a modern operator interface

The above mentioned equipment has the following components:

1. Warp Beam Frame, 2 x 21" separation - 1 pcs
2. Bars for supporting rolls with diameters of 152 mm - 2 pcs
3. Model discs for fiberglass mesh manufacturing - 3 pcs
4. E18’bar with new needles - 4 pcs
5. Bar for closing links - 1 pcs
6. Guide bars with new fabric needles - 3 pcs
7. Stitch comb bar - 1 pcs
8. EBC -EBA for run-in yarns - 1 pcs
9. Frequency adjustment device, including the start-stop software - 1 pcs
10. Frame with distributors for roving threads - 1 pcs
11. Electric panel with 10,4'' touchscreen and 2016 updated software - 1 pcs
12. Dosing device - 1 pcs

Working speed - 700 RPM

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Gauge 12
Width 176 mm
-------------------
Length x width x height 7100.0 × 4500.0 × 2700.0
Weight 220000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type User – large company
Active since 2018
Offers online 0
Last activity March 24, 2022