Sawing line based on Kara Master machines.

Technical data of the KARA MASTER machine

1 Passing table 9 m long, 0.7 m wide

2 Length, m 18.3 (5.8 x 5.8 x 6.7)

3 Transport dimensions, m 6.8 x 2.2 x 1.8

4 Weight, kg approx. 4700 kg

5 Frame profile, mm 200 x 70 x 6

6 Cutting height of a saw disk (disk 1000mm) 395 mm

7 Diameter of a saw disk, mm 800 - 1200

8 Size Setting

Electromechanical device KARA LS360. Operating range 10-310 mm, installation speed 120 mm / s. Programmable up to 120 sizes in 0.1 mm increments. Programming allowance for sawing, memory of the last used size.

9 Feed speed, m / min Stepless 0-140 m / min

10 Hydraulics

Twin pump: 45 l / min feeder pump, 34 l / min option pump. Tank capacity 105 l. The control of the table and the feed shaft is pre-configured, automatically adjustable depending on the load on the saw shaft.

11 Electric motors

The main one is 45 k / W1500 rpm. Hydraulics-11 kW / 1500 rpm (option). Exhauster for sawdust-4kW / 3000 rpm. Sharpening machine - 0.55kW / 3000 rpm. The upper saw blade is 11kW / 1500 rpm (optional).

12 Double feed shaft with separate hydraulic motor

13 Minimum diameter of a log, mm 100

14 Maximum diameter of a log, mm 650

15 Minimum log length, m 1,5

16 Maximum log length, m 9

17 Operating temperature, ° С -20 / + 30 (ambient temperature)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2019
Offers online 1
Last activity Dec. 29, 2022

Description

Sawing line based on Kara Master machines.

Technical data of the KARA MASTER machine

1 Passing table 9 m long, 0.7 m wide

2 Length, m 18.3 (5.8 x 5.8 x 6.7)

3 Transport dimensions, m 6.8 x 2.2 x 1.8

4 Weight, kg approx. 4700 kg

5 Frame profile, mm 200 x 70 x 6

6 Cutting height of a saw disk (disk 1000mm) 395 mm

7 Diameter of a saw disk, mm 800 - 1200

8 Size Setting

Electromechanical device KARA LS360. Operating range 10-310 mm, installation speed 120 mm / s. Programmable up to 120 sizes in 0.1 mm increments. Programming allowance for sawing, memory of the last used size.

9 Feed speed, m / min Stepless 0-140 m / min

10 Hydraulics

Twin pump: 45 l / min feeder pump, 34 l / min option pump. Tank capacity 105 l. The control of the table and the feed shaft is pre-configured, automatically adjustable depending on the load on the saw shaft.

11 Electric motors

The main one is 45 k / W1500 rpm. Hydraulics-11 kW / 1500 rpm (option). Exhauster for sawdust-4kW / 3000 rpm. Sharpening machine - 0.55kW / 3000 rpm. The upper saw blade is 11kW / 1500 rpm (optional).

12 Double feed shaft with separate hydraulic motor

13 Minimum diameter of a log, mm 100

14 Maximum diameter of a log, mm 650

15 Minimum log length, m 1,5

16 Maximum log length, m 9

17 Operating temperature, ° С -20 / + 30 (ambient temperature)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 1
Last activity Dec. 29, 2022

Here is a selection of similar machines

Kara Master Plant