Kammann K14 Screen printing machine
|Max printing length|
|Max printing width|
|Number of colours||3.0|
|Max product height|
|Type of material|
|Max product diameter|
|Length x width x height||8200.0 mm × 2500.0 mm × 2300.0 mm|
|Hours under power|
|At local norms||---------|
Three-color automatic screen printing machine with UV drying equipped with 2 stations for flame surface preparation. Supplying details from the conveyor belt that is equipped with the machine through the feeding manipulator. Details are also sent to the machine conveyor.
The printing of round details and after the purchase of additional equipment from Kammann, the possibility of printing oval details.
The machine is in very good general condition with the main drive transmission. All defects were repaired on an ongoing basis with the original parts.
Silk screen printer - KAMMANN 14 U
Length of the article (after diameter development): 20 to 300 mm;
over 300 mm of base extension
with differential slides at the side suspension of the sieve:
20 - 120 mm diameter max. Image length
with the width of 100 mm lamps: 315 mm
max. Image length at 200 mm
lamp widths: 265 mm
with differential slide at the rear suspension of the sieve:
20 - 120 mm diameter of the max. Image length
with the width of 100 mm lamps: 380 mm
max. image length at 200 mm
the width of the lamps: 340 mm
Width: 30 to 120 mm max.
Height: 20 to g0 mm max.
Radius: min. 20 mm
FLAT PRINT !:
Width: 120 mm max.
Height: 20 to 90 mm
max. number of cycles: 85 / min
max. printing capacity: 75 / min
Depends on the size of the article, its form, material, print saturation and print color.
Electrical connection :
With a single-row burner and 200 mm firing length:
approx, 6.2 m3 volume sucked / h (3.65 cu ft / m)
on the printing mechanism:
about 7.5 m3 suction volume / h (4.4 cu ft / m)
6 bar: 87 psi = 0.6 MPa
With a single-row burner and 200mm firing length:
Propane: about 0,184 m3 / h = 0,11 cu ftlmin
Natural gas approx. 0.78 m3 / h = 0.46 cu ft / m
Propane: approx. 50 mbar: 0.725 psi = 5kPa
about 22 mbar = 0.319 psi = 2.2 kPa
attached: 70 mbar = 1.015 psi = 7kPa
(can not be exceeded)
2 printing mechanisms about 2500 kg
4 printing mechanisms about 3800 kg
Amount of exhaust air:
With a lamp capacity of 3 KW approx. 25o m3 / h
Please note that this description may have been translated automatically. Contact us for further information.