Model: HDM 1431 / T13 / SP-CNC

Year 2002

Weight without accessories: 10,980kh

- Disc saw with downward cut.

- Geared saw unit, drive system and saw blade on wear-resistant swivel bearing.

- Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp.

- Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil.

- Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation.

- Vertical clamping block with self-adjusting push plate.

- Oblique cutting device to adjust the angle from 45° to the left to 35° to the right.

- Material sensor to automatically switch from fast forward to work forward.

- Hydraulically elevating feed roller for optimum material transport on the saw table.

- Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles.

- Chip collector installed on the machine bench.

Specifications:

- Cutting disc housing: 100x4x30x250mm

- Cutting disc diameter: 1,430mm

- Cutting width: 9.5mm

- Cutting speed: 10 to 20m/min.

- Saw advance speed: 0-400mm/min.

- Fast reverse speed: 2000mm/min.

- Total power: 25KW

- Working height: 640mm

Cutting capacities:

90º cut

- Angle steel: 250mm

- Steel in U: 400mm

- Double T-beam: 600mm

- Wide flanged beam: 1008x302mm

- Special wing beams: 1000x450mm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Weight 10980 kg
Worked hours
Hours under power
State good
At local norms yes
Status visible
Client type Reseller
Active since 2016
Offers online 70
Last activity March 28, 2024

Description

Model: HDM 1431 / T13 / SP-CNC

Year 2002

Weight without accessories: 10,980kh

- Disc saw with downward cut.

- Geared saw unit, drive system and saw blade on wear-resistant swivel bearing.

- Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp.

- Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil.

- Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation.

- Vertical clamping block with self-adjusting push plate.

- Oblique cutting device to adjust the angle from 45° to the left to 35° to the right.

- Material sensor to automatically switch from fast forward to work forward.

- Hydraulically elevating feed roller for optimum material transport on the saw table.

- Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles.

- Chip collector installed on the machine bench.

Specifications:

- Cutting disc housing: 100x4x30x250mm

- Cutting disc diameter: 1,430mm

- Cutting width: 9.5mm

- Cutting speed: 10 to 20m/min.

- Saw advance speed: 0-400mm/min.

- Fast reverse speed: 2000mm/min.

- Total power: 25KW

- Working height: 640mm

Cutting capacities:

90º cut

- Angle steel: 250mm

- Steel in U: 400mm

- Double T-beam: 600mm

- Wide flanged beam: 1008x302mm

- Special wing beams: 1000x450mm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Weight 10980 kg
Worked hours
Hours under power
State good
At local norms yes
Status visible

About this seller

Client type Reseller
Active since 2016
Offers online 70
Last activity March 28, 2024

Here is a selection of similar machines

Kaltenbach HDM 1431 / KDX 1215 drilling and cutting line