4,000 €
Make an offer| Power in tons | 25 T |
| ------------------- | |
| Weight | 3000 kg |
| worked hours | |
| hours under power | |
| state | malfunction |
| At local norms | yes |
| status | visible |
| Last availability date | 29/04/2026 |
This listing features a KAEV model 6005 hydraulic forging press manufactured in 1977. The machine offers a pressing force of 25 tons and weighs approximately 3,000 kg. It is a large, green industrial hydraulic press equipped with a hydraulic motor mounted on top. The control panel is located on the front side of the machine and includes various knobs and emergency stop buttons for operational safety. Hydraulic hoses are connected on the left side, indicating the machine's hydraulic system setup.
The press shows signs of wear consistent with its age and use, including some paint chipping and scratches on the exterior surfaces. It is important to note that there is a structural crack on one side of the guide. The manufacturer advises against welding this crack and recommends replacing both sides of the guide rather than repairing only the damaged section. Due to this issue, the machine is offered primarily for repair, refurbishment, or as a source of spare parts.
The machine is complete and includes the control panel and hydraulic components. While the hydraulics are noted as fully functional, the structural guide damage should be carefully considered. This press is suitable for buyers looking for a powerful hydraulic forging press who have the capability to undertake necessary repairs or require parts for similar equipment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Pressing force: 25 t
Weight: approx. 3,000 kg
Location: Kroměříž
Hydraulics: fully functional
The machine is complete, including the control panel
Condition:
There is a structural crack on one side of the guide. The manufacturer does not recommend welding and recommends replacing both sides of the guide (not just the damaged part). For this reason, the machine is offered for repair, refurbishment, or as a source of spare parts.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | April 29, 2026 |
Pressing force: 25 t
Weight: approx. 3,000 kg
Location: Kroměříž
Hydraulics: fully functional
The machine is complete, including the control panel
Condition:
There is a structural crack on one side of the guide. The manufacturer does not recommend welding and recommends replacing both sides of the guide (not just the damaged part). For this reason, the machine is offered for repair, refurbishment, or as a source of spare parts.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 25 T |
| ------------------- | |
| Weight | 3000 kg |
| worked hours | |
| hours under power | |
| state | malfunction |
| At local norms | yes |
| status | visible |
| Last availability date | 29/04/2026 |
This listing features a KAEV model 6005 hydraulic forging press manufactured in 1977. The machine offers a pressing force of 25 tons and weighs approximately 3,000 kg. It is a large, green industrial hydraulic press equipped with a hydraulic motor mounted on top. The control panel is located on the front side of the machine and includes various knobs and emergency stop buttons for operational safety. Hydraulic hoses are connected on the left side, indicating the machine's hydraulic system setup.
The press shows signs of wear consistent with its age and use, including some paint chipping and scratches on the exterior surfaces. It is important to note that there is a structural crack on one side of the guide. The manufacturer advises against welding this crack and recommends replacing both sides of the guide rather than repairing only the damaged section. Due to this issue, the machine is offered primarily for repair, refurbishment, or as a source of spare parts.
The machine is complete and includes the control panel and hydraulic components. While the hydraulics are noted as fully functional, the structural guide damage should be carefully considered. This press is suitable for buyers looking for a powerful hydraulic forging press who have the capability to undertake necessary repairs or require parts for similar equipment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | April 29, 2026 |
Хидравлична преса KAEV 6005
Hydraulický lis KAEV 6005
KAEV 6005 Hydraulisk presse
KAEV 6005 Hydraulische Presse
Υδραυλική πρέσα KAEV 6005
KAEV 6005 Hydraulic press
Prensa hidráulica KAEV 6005
Presse hydraulique KAEV 6005
Hidraulična preša KAEV 6005
KAEV 6005 Hidraulikus prés
Pressa idraulica KAEV 6005
KAEV 6005 Hidraulinis presas
KAEV 6005 Hydraulische pers
Prasa hydrauliczna KAEV 6005
Prensa hidráulica KAEV 6005
Presă hidraulică KAEV 6005
KAEV 6005 Гидравлический пресс
Hidraulična presa KAEV 6005
KAEV 6005 Hydraulpress
Hidrolik pres KAEV 6005
EN
- Languages
English (GB)