Price on request
Make an offer| Power in tons | 2500 T |
| Table length | 3365 mm |
| Table width | 1400 mm |
| Ram stroke | 1000 mm |
| Distance between columns | 1549 mm |
| Engine Power | 300 kW |
| ------------------- | |
| Length x width x height | 6065.0 × 2490.0 × 3170.0 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | JSW D160S-5 |
| Last availability date | 02/04/2026 |
For Sale: JSW Hydraulic Free Forging Press, Model D160S-5, manufactured in 1987.
This robust forging press offers a substantial capacity of 2500 tons (approximately 25 MN) with a static working pressure of 234 bar. It is equipped with a hydraulic ram featuring a stroke length of 1000 mm and a press daylight height of 2489 mm, allowing for significant forging operations. The distance between the columns is 1549 mm, providing ample space for various workpieces. The die table measures 3365 mm in length and 1400 mm in width, with a stroke of 1500 mm, suitable for accommodating large dies.
The press is powered by four axial piston hydraulic pumps (Rexroth A2F500 and A2F125 models) operating at a working pressure of 350 bar and delivering a total flow of 2500 liters per minute. The electric drive consists of four main motors, each rated at 300 kW, 3300 volts, 60 Hz, with IP54 protection and F insulation class, totaling 1377 kW of electric power supply.
Operational speeds include forging and upsetting at 58 mm/sec under full load, with advance speeds of 250 mm/sec (fast) and 10 mm/sec (slow), and die table slide speeds of 250 mm/sec (fast) and 5 mm/sec (slow).
The press features safety railings and ladder access on the upper section, enhancing operator safety. Visible hydraulic cylinders and mechanical components are part of the ram and support structure. Various metal molds and blocks are positioned around the machine base, indicating readiness for forging tasks.
The machine shows signs of extensive use, including surface discoloration, paint wear, and some rust on the frame and ram, consistent with heavy industrial operation. The floor area around the press has metal scraps and dust accumulation.
Dimensions of the forklift manipulator included are 6065 mm in length, 2490 mm in width, and 3170 mm in height, with a gross weight of 18.9 tons. It is self-propelled with tire drive, powered by a 6-cylinder diesel engine rated at 160/2100 PS/RPM, and has an actual loading capacity of 5 tons.
Partial manuals and drawings are available. The press is currently installed on a foundation and offered as-is. This heavy-duty forging press is suitable for demanding forging operations requiring high capacity and reliability.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
For Sale: Forging Equipment
Equipment Type: Free Forging Press
Manufacturer: JSW
Model: 2500 Ton Two Columns Push Down Free Forging Hydraulic Press
Year of Manufacture: 1987 (Retrofit in 1999)
Technical Condition: Good working condition, as-is, where-is
Press Specifications:
- Capacity: 2500 tons (300 kg/cm²)
- Upsetting Force at Static Working Pressure: 25 MN (234 bar)
- Stroke: 1000 mm
- Press Daylight: 2489 mm
- Distance Between Side Flame: 1549 mm
- Number of Pull Back Cylinder: 1
- Allowable Eccentric Load at 25 MN: 200 mm radius
- Forging Tolerance Measure on Hot Workpiece: ±1 mm
- Die Table Area (Width x Length x Stroke): 1400 x 3365 x 1500 mm
Press Speeds:
- Forging & Upsetting at 25 MN: 58 mm/sec
- Advance Speed, Fast/Slow: 250/10 mm/sec
- Die Table Slide Forward, Fast/Slow: 250/5 mm/sec
Press Forces:
- Forging & Upsetting at 234 bar: 25 MN (2500 tons)
- Return at 234 bar: 3.5 MN (350 tons)
- Table Shift at 234 bar (Forward): 0.6 MN (60 tons)
- Table Shift at 234 bar (Back): 0.4 MN (40 tons)
Hydraulic Pumps (Main):
- Type: Axial Piston Pump
- Quantity: 4 sets
- Pressure Rate: 400 bar
- Working Pressure: 350 bar
- Model: Rexroth (A2F500, A2F125)
- Total Flow: 2500 ℓ/min (315 bar)
Electric Main Motors:
- 4 sets: 300 KW, 6P, 3300 volt, 60 Hz, IP54, F class, Single end shaft
- Total Electric Power Supply: 1377 KW
Forklift Manipulator:
- Type: Used Doosan or Daewoo 16 (15) Ton Forklift Type Manipulator
- Model: D160S-5
- Year of Manufacture: 2007
- Actual Loading Capacity: 5 Ton
- Length: 6065 mm
- Width: 2490 mm
- Height: 3170 mm
- Gross Weight: 18.9 tons
- Driving Type: Self-propelled (Tire Type)
- Rated Power: 160/2100 PS/RPM
- Number of Cylinders: 6
- Fuel Type: Diesel
Manual & Drawings: Partially available
Item Condition: Good working condition, on Foundation
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 20, 2026 |
For Sale: Forging Equipment
Equipment Type: Free Forging Press
Manufacturer: JSW
Model: 2500 Ton Two Columns Push Down Free Forging Hydraulic Press
Year of Manufacture: 1987 (Retrofit in 1999)
Technical Condition: Good working condition, as-is, where-is
Press Specifications:
- Capacity: 2500 tons (300 kg/cm²)
- Upsetting Force at Static Working Pressure: 25 MN (234 bar)
- Stroke: 1000 mm
- Press Daylight: 2489 mm
- Distance Between Side Flame: 1549 mm
- Number of Pull Back Cylinder: 1
- Allowable Eccentric Load at 25 MN: 200 mm radius
- Forging Tolerance Measure on Hot Workpiece: ±1 mm
- Die Table Area (Width x Length x Stroke): 1400 x 3365 x 1500 mm
Press Speeds:
- Forging & Upsetting at 25 MN: 58 mm/sec
- Advance Speed, Fast/Slow: 250/10 mm/sec
- Die Table Slide Forward, Fast/Slow: 250/5 mm/sec
Press Forces:
- Forging & Upsetting at 234 bar: 25 MN (2500 tons)
- Return at 234 bar: 3.5 MN (350 tons)
- Table Shift at 234 bar (Forward): 0.6 MN (60 tons)
- Table Shift at 234 bar (Back): 0.4 MN (40 tons)
Hydraulic Pumps (Main):
- Type: Axial Piston Pump
- Quantity: 4 sets
- Pressure Rate: 400 bar
- Working Pressure: 350 bar
- Model: Rexroth (A2F500, A2F125)
- Total Flow: 2500 ℓ/min (315 bar)
Electric Main Motors:
- 4 sets: 300 KW, 6P, 3300 volt, 60 Hz, IP54, F class, Single end shaft
- Total Electric Power Supply: 1377 KW
Forklift Manipulator:
- Type: Used Doosan or Daewoo 16 (15) Ton Forklift Type Manipulator
- Model: D160S-5
- Year of Manufacture: 2007
- Actual Loading Capacity: 5 Ton
- Length: 6065 mm
- Width: 2490 mm
- Height: 3170 mm
- Gross Weight: 18.9 tons
- Driving Type: Self-propelled (Tire Type)
- Rated Power: 160/2100 PS/RPM
- Number of Cylinders: 6
- Fuel Type: Diesel
Manual & Drawings: Partially available
Item Condition: Good working condition, on Foundation
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 2500 T |
| Table length | 3365 mm |
| Table width | 1400 mm |
| Ram stroke | 1000 mm |
| Distance between columns | 1549 mm |
| Engine Power | 300 kW |
| ------------------- | |
| Length x width x height | 6065.0 × 2490.0 × 3170.0 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | JSW D160S-5 |
| Last availability date | 02/04/2026 |
For Sale: JSW Hydraulic Free Forging Press, Model D160S-5, manufactured in 1987.
This robust forging press offers a substantial capacity of 2500 tons (approximately 25 MN) with a static working pressure of 234 bar. It is equipped with a hydraulic ram featuring a stroke length of 1000 mm and a press daylight height of 2489 mm, allowing for significant forging operations. The distance between the columns is 1549 mm, providing ample space for various workpieces. The die table measures 3365 mm in length and 1400 mm in width, with a stroke of 1500 mm, suitable for accommodating large dies.
The press is powered by four axial piston hydraulic pumps (Rexroth A2F500 and A2F125 models) operating at a working pressure of 350 bar and delivering a total flow of 2500 liters per minute. The electric drive consists of four main motors, each rated at 300 kW, 3300 volts, 60 Hz, with IP54 protection and F insulation class, totaling 1377 kW of electric power supply.
Operational speeds include forging and upsetting at 58 mm/sec under full load, with advance speeds of 250 mm/sec (fast) and 10 mm/sec (slow), and die table slide speeds of 250 mm/sec (fast) and 5 mm/sec (slow).
The press features safety railings and ladder access on the upper section, enhancing operator safety. Visible hydraulic cylinders and mechanical components are part of the ram and support structure. Various metal molds and blocks are positioned around the machine base, indicating readiness for forging tasks.
The machine shows signs of extensive use, including surface discoloration, paint wear, and some rust on the frame and ram, consistent with heavy industrial operation. The floor area around the press has metal scraps and dust accumulation.
Dimensions of the forklift manipulator included are 6065 mm in length, 2490 mm in width, and 3170 mm in height, with a gross weight of 18.9 tons. It is self-propelled with tire drive, powered by a 6-cylinder diesel engine rated at 160/2100 PS/RPM, and has an actual loading capacity of 5 tons.
Partial manuals and drawings are available. The press is currently installed on a foundation and offered as-is. This heavy-duty forging press is suitable for demanding forging operations requiring high capacity and reliability.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 20, 2026 |
Хидравлична преса JSW D160S-5
Hydraulický lis JSW D160S-5
JSW D160S-5 Hydraulisk presse
JSW D160S-5 Hydraulische Presse
Υδραυλική πρέσα JSW D160S-5
JSW D160S-5 Hydraulic press
Prensa hidráulica JSW D160S-5
Presse hydraulique JSW D160S-5
Hidraulična preša JSW D160S-5
JSW D160S-5 Hidraulikus prés
Pressa idraulica JSW D160S-5
JSW D160S-5 Hidraulinis presas
JSW D160S-5 Hydraulische pers
Prasa hydrauliczna JSW D160S-5
Prensa hidráulica JSW D160S-5
Presă hidraulică JSW D160S-5
JSW D160S-5 Гидравлический пресс
Hidraulična presa JSW D160S-5
JSW D160S-5 Hydraulpress
Hidrolik pres JSW D160S-5
EN
- Languages
English (GB)