Price on request
View price| Load capacity | 450 kg |
| Lifting height | mm |
| Power source | |
| Type | |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | 4600 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 21/04/2026 |
This JLG 3369 LE scissor lift, manufactured in 2007, is designed for elevated work applications requiring a substantial platform height and load capacity. It features a maximum platform height of 10.06 meters and a lowered platform height of 1.69 meters. The platform itself measures 1.65 meters by 2.92 meters, with an additional extension of 0.91 meters to increase working space. Guardrails around the platform are 1.10 meters high, with a total folded height of 1.98 meters, ensuring user safety during operation.
The machine weighs 4,600 kg and offers a load capacity of 450 kg on the platform, with an additional 120 kg on the platform extension. It is equipped with four large off-road tires, suitable for various terrain types. Travel speeds are 4.8 km/h when folded and 0.8 km/h when raised, with the ability to climb slopes up to 35%. The scissor lift has a wheelbase of 2.32 meters, total width of 1.75 meters, and total length of 3.07 meters.
Control features include a removable platform control box with proportional travel control operable by one hand, joystick controls for raising and travel, and programmable personalized settings. Safety features include electro-magnetic brakes, automatic traction control, automatic rear brakes, and a load detection system. The unit also has fold-down guardrails, a self-closing door, safety harness anchor rings, and steel scissor protections.
Power is supplied by eight 6V 370 A/hr traction batteries, supported by an automatic 23 Amp charger. The hydraulic system uses a gear pump with a 32-liter capacity. Additional components include a keyed control switch, battery charge indicator, hour counter, and a manual cable descent mechanism.
Visible signs of rust and paint wear are present on the upper safety railings and platform edges, reflecting typical use over time. The machine includes ladder access for platform entry and is shown positioned outdoors on a paved surface near metal structures. This scissor lift is suitable for demanding material handling and elevated work tasks requiring a reliable and well-equipped platform.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Basket
A. Platform height – raised 10.06 m
B. Platform height – lowered 1.69 m
C. Guardrail height 1.10 m
D. Total height (folded guardrails) 1.98 m
E. Platform dimensions 1.65 m x 2.92 m
F. Platform extension 0.91 m
G. Total width 1.75 m
H. Total length 3.07 m
I. Wheelbase 2.32 m
J. Ground clearance 0.20 m
Load on platform 450 kg
Load on platform extension 120 kg
Cycle time (up/down) 38/42 sec.
Maximum translation height 10.06 m
Weight 4,600 kg
Maximum ground pressure 8.1 kg/cm2
Travel speed – folded 4.8 km/h
Travel speed – raised 0.8 km/h
Climbable slope 35%
Turning radius – inside 2.29 m
Turning radius – outside 4.88 m
Tires (Non-marking) 240/55-17.5
Electro-magnetic brakes
Electric motor Direct Current
Hydraulic pump Gear pump
Batteries 8 x 6V 370 A/hr
Charger (120/240V - 50/60HZ) 23 Amp Automatic SCR
Hydraulic system 32 L
Platform extension 0.91 m
Fold-down guardrails
Self-closing door
Removable platform control box
Safety harness anchor rings
Proportional travel control operable with one hand
Proportional control of raising and travel speed
Control joystick for raising and travel
Load detection system
Two selectable travel speeds
2 electric wheel motors
8 traction batteries 6V 370 A/h, long life
Automatic traction control
Programmable "personalized" settings
Onboard self-test
Removable battery compartments
Automatic battery charger 23 A
Automatic rear brakes
Raised ABS covers
3° tilt with audible and visual warning
Steel scissor protections
Non-marking foam tires 240/55 – 17.5
Non-marking foam-padded tires 240/55 - 17.5
Tie-down and sling rings
Lifting/towing rings
Safety bar for maintenance
Maintenance support for scissors
Keyed control switch, low box
Manual cable descent
Battery charge indicator
Hour counter
Traction cable for manual descent
Year: 2007
First Registration At: 2007-12-01
Hours: 726 hours
Driving Wheels Number: 2
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2004 |
| Offers online | 596 |
| Last activity | May 6, 2026 |
CAPM Europe is a France-based supplier of new and used material handling equipment, with a strong focus on forklifts and warehouse machinery. With more than 2,000 machines in stock on its website, the company offers a wide selection of equipment for logistics, warehousing, and industrial handling needs. In addition to machine sales, CAPM Europe provides rental services, spare parts, and equipment trade-in solutions. Headquartered in Senlis, the company operates across multiple European markets through a multilingual web presence.
Basket
A. Platform height – raised 10.06 m
B. Platform height – lowered 1.69 m
C. Guardrail height 1.10 m
D. Total height (folded guardrails) 1.98 m
E. Platform dimensions 1.65 m x 2.92 m
F. Platform extension 0.91 m
G. Total width 1.75 m
H. Total length 3.07 m
I. Wheelbase 2.32 m
J. Ground clearance 0.20 m
Load on platform 450 kg
Load on platform extension 120 kg
Cycle time (up/down) 38/42 sec.
Maximum translation height 10.06 m
Weight 4,600 kg
Maximum ground pressure 8.1 kg/cm2
Travel speed – folded 4.8 km/h
Travel speed – raised 0.8 km/h
Climbable slope 35%
Turning radius – inside 2.29 m
Turning radius – outside 4.88 m
Tires (Non-marking) 240/55-17.5
Electro-magnetic brakes
Electric motor Direct Current
Hydraulic pump Gear pump
Batteries 8 x 6V 370 A/hr
Charger (120/240V - 50/60HZ) 23 Amp Automatic SCR
Hydraulic system 32 L
Platform extension 0.91 m
Fold-down guardrails
Self-closing door
Removable platform control box
Safety harness anchor rings
Proportional travel control operable with one hand
Proportional control of raising and travel speed
Control joystick for raising and travel
Load detection system
Two selectable travel speeds
2 electric wheel motors
8 traction batteries 6V 370 A/h, long life
Automatic traction control
Programmable "personalized" settings
Onboard self-test
Removable battery compartments
Automatic battery charger 23 A
Automatic rear brakes
Raised ABS covers
3° tilt with audible and visual warning
Steel scissor protections
Non-marking foam tires 240/55 – 17.5
Non-marking foam-padded tires 240/55 - 17.5
Tie-down and sling rings
Lifting/towing rings
Safety bar for maintenance
Maintenance support for scissors
Keyed control switch, low box
Manual cable descent
Battery charge indicator
Hour counter
Traction cable for manual descent
Year: 2007
First Registration At: 2007-12-01
Hours: 726 hours
Driving Wheels Number: 2
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Load capacity | 450 kg |
| Lifting height | mm |
| Power source | |
| Type | |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | 4600 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 21/04/2026 |
This JLG 3369 LE scissor lift, manufactured in 2007, is designed for elevated work applications requiring a substantial platform height and load capacity. It features a maximum platform height of 10.06 meters and a lowered platform height of 1.69 meters. The platform itself measures 1.65 meters by 2.92 meters, with an additional extension of 0.91 meters to increase working space. Guardrails around the platform are 1.10 meters high, with a total folded height of 1.98 meters, ensuring user safety during operation.
The machine weighs 4,600 kg and offers a load capacity of 450 kg on the platform, with an additional 120 kg on the platform extension. It is equipped with four large off-road tires, suitable for various terrain types. Travel speeds are 4.8 km/h when folded and 0.8 km/h when raised, with the ability to climb slopes up to 35%. The scissor lift has a wheelbase of 2.32 meters, total width of 1.75 meters, and total length of 3.07 meters.
Control features include a removable platform control box with proportional travel control operable by one hand, joystick controls for raising and travel, and programmable personalized settings. Safety features include electro-magnetic brakes, automatic traction control, automatic rear brakes, and a load detection system. The unit also has fold-down guardrails, a self-closing door, safety harness anchor rings, and steel scissor protections.
Power is supplied by eight 6V 370 A/hr traction batteries, supported by an automatic 23 Amp charger. The hydraulic system uses a gear pump with a 32-liter capacity. Additional components include a keyed control switch, battery charge indicator, hour counter, and a manual cable descent mechanism.
Visible signs of rust and paint wear are present on the upper safety railings and platform edges, reflecting typical use over time. The machine includes ladder access for platform entry and is shown positioned outdoors on a paved surface near metal structures. This scissor lift is suitable for demanding material handling and elevated work tasks requiring a reliable and well-equipped platform.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2004 |
| Offers online | 596 |
| Last activity | May 6, 2026 |
CAPM Europe is a France-based supplier of new and used material handling equipment, with a strong focus on forklifts and warehouse machinery. With more than 2,000 machines in stock on its website, the company offers a wide selection of equipment for logistics, warehousing, and industrial handling needs. In addition to machine sales, CAPM Europe provides rental services, spare parts, and equipment trade-in solutions. Headquartered in Senlis, the company operates across multiple European markets through a multilingual web presence.
Машина за обработка на материали JLG 3369 LE
Manipulační stroj JLG 3369 LE
JLG 3369 LE Maskine til materialehåndtering
JLG 3369 LE Flurförderzeug
Μηχανή διακίνησης υλικών JLG 3369 LE
JLG 3369 LE Material handling machine
Máquina de manipulación de materiales JLG 3369 LE
Machine de manutention JLG 3369 LE
Stroj za rukovanje materijalom JLG 3369 LE
JLG 3369 LE Anyagmozgató gép
Macchina per la movimentazione dei materiali JLG 3369 LE
JLG 3369 LE Medžiagų tvarkymo mašina
JLG 3369 LE Machine voor material handling
Maszyna transportu bliskiego JLG 3369 LE
Máquina de movimentação de materiais JLG 3369 LE
Mașină pentru manipularea materialelor JLG 3369 LE
JLG 3369 LE Машина для обработки материалов
Mašina za rukovanje materijalom JLG 3369 LE
JLG 3369 LE Maskin för materialhantering
Malzeme elleçleme makinesi JLG 3369 LE
EN
- Languages
English (GB)