Sorry, this offer is no longer available on Exapro

JJ SMITH MOBI-ONE 1038 Plant

Here is a selection of similar machines

STATION 1 FRAMING AND AUTOMATIC NAILING TABLE
BRAND JJ SMITH type "MOBI-ONE 1038
RECENT EQUIPMENT, SUBERB CONDITION, REVISED AND GUARANTEED
Technical specifications : 

Year: 2012
CNC : Dual control panel with 17' colour touch screens
Display of panel plan, positioning dimensions and zoom function Data recovery drawing software by interface
 TABLES: Mounting tables with a fixed and a movable part, each with a 400 mm wide useful support plane and 850 mm working height
 The mobile part is equipped with pinion gears ensuring the synchronization of the movement over the entire length of the table.
 The rails with racks are fixed to the floor with dowels and adjustment screws, ensuring perfect straightness and rigidity to the assembly.
Motorized mobile table moving by brake motor with adjustable pressure, for clamping the frames. 
BUTEES: At the front, 2 framing stops, and 2 clamps for the first crossbar, can be lifted and retracted pneumatically for the exit of the panel. Control at the desk by solenoid valves.
On each side, along the fixed and movable tables, a row of independent lateral stops, each one pneumatically retractable to retract automatically as the horizontal nailers pass. At the front, the centre distances are 500 mm and then every 850 mm over the rest of the length, i.e. 12 independent clamping stops on each side of the tables.
These 85 mm high stops (for mini panels h=90mm) prevent the upper and lower rails from "opening" upwards and keep them perfectly vertical and square when tightening the frame.
 When moving the MOBI-ONE gantry, the mobile table releases its pressure on the frame, allowing the introduction of a new cross member or subassembly, then tightens the assembly again before the nailing operation.
 GATE: Gantry with 1 motorized moving nailing carriage.
Digital positioning in automatic mode
Programming of nailing distances between centres
Ball slides supporting the nailing carriage
Movement of the carriage by rack and pinion and servomotor
Support for the industrial type nailer(s) (3 maxi)
Option for on-board router, with CNC control
Nailing: Nailing or stapling depending on the type of operations performed.
The mobile upper carriage supports:
- 1 digitized nailer for lathing (ITW ref CW650)
- 1 digitized stapler with loader (ITW Paslode ref S540) for OSB
Motorized movement by industrial servo motor and automatic nailing, with nailing distances programmed on CAD.
Manual adjustment by hand wheel of the height of the nailer supports on vernier.
Option fixed trolley retractable on high boom with stapler (S540)
Independent pneumatic lowering of each nailing unit, with 60 mm stroke, to adapt to differences in frame thickness without prior adjustment (e. g. 145 to 120 mm)
Roller guide on top of the bracing panel
Device for not nailing at openings (optical fiber)
Side nailing: 2 side boxes, integrating the side nailers on the sides of the gantry, and moving on rails, the whole being pneumatically retractable.
Servo cylinders, incorporated in these housings, with movements on THK slides, control the nailers in height, and are configured to receive nailers with extended magazine and pneumatic firing remote control.
Positioning and number of automatic nails according to automatic software programming, on 300 mm stroke.
2 lateral nailers capacity 100 mm (ITW Paslode ref PSN100)

DEFOUNDING : The upper carriage carries a routing unit on the front.

Motorized movement by industrial servo motor and automatic machining, with programmed movements on CAD in X and Y.
Electronic speed variator with programming on the console.
Industrial electro-spindle power 3 KW at 12,000 rpm
Scheduled automatic start
Pneumatic lowering of the routing unit to adapt to all frame thicknesses without prior adjustment (e. g. 145 to 240 mm) Roller guide on top of the bracing panel
Interpolation of axes allowing movements over angles as well as in curves according to defined radius
Dust extractor on board the gantry column, with flexible pipes for connection to the suction nozzle.
Automatic start of suction with the ripping function.
Device for collecting suction around the wick
EVACUATION: 2 lines of free running rollers, incorporated along the entire length of the tables. They can be pneumatically lifted at the end of the nailing, facilitating the exit of the panel to an exit table (manual push).
Control of the lifting on the console by solenoid valve.
OPERATION: Principle of the "5 functions":
- 1st function: Frame assembly with automated lateral nailing
Gantry in position Parking at the end of the frame
Manual installation of the OSB and manual pre-nailing
Maintaining framing and squaring during this operation
- 2nd function: Fully automatic nailing of the bracing
in CNC mode with upper nailers
Programmed nailing distances
Maintaining framing and squaring during this operation
- 3rd function: Tearing down openings and outer edges
with CNC-controlled PN descending router
and suction device on board.
- 4th function: Rainscreen unwinding via device on the gantry
Moving the gantry with automatic removal of the rainscreen
Maintaining framing and squaring during this operation
Manual cutting of the rainscreen and end stapling
- 5th function: Semi-automatic nailing of cleats
Positioning of the automatic gantry above the
crossings. Guidance system. On-board storage rack
Maintaining framing and squaring during this operation
On-screen display of the number of cleats to be loaded
C/ Technical characteristics of the MOBI-ONE :
Minimum panel width................................................................................ 1 300 mm
Stroke of the moving part.................................................................................... 2,500 mm
Either maximum width of the panels........................................................................ 3,800 mm
Maximum panel length............................................................................... 10,000 mm
Minimum panel length................................................................................... 500 mm
Minimum framework thickness................................................................................................ 90 mm

Passage under the tools...................................................................................... 350 mm
 
Important : The fixed table (low smooth) is located on the left hand side as standard.
C/ Technical characteristics of the MOBI-ONE (continued) :
General electrical cabinet integrated in the gantry. 
2 desks with touch-screen colour displays, one inside on a bracket for framing and one outside, touch-screen PC under Windows environment. 
Ergonomic control interface with menu access and visualization of the wall panel under construction. Follow-up of the work by color codes on the amounts. 
CE Safety Specifications
Light curtains on the gantry at the operator's station
Automatic stop device in the event of an obstacle on the fixed column of the gantry
2 light curtains on the movable side 
The average production is estimated at 4 braced panels of 9 m long per day, depending on the panel model, with only one operator, i. e. approximately 100 m2 / day.
E/ Price of the used MOBI-ONE machine: 
Complete handset equipped with:
- Membrane roller holder and software device for automatic removal
- Device for automatic nailing of cleats with CNC control
- Retractable fixed trolley with stapler support on high rail
- Support for second nailer holder on mobile trolley
- Power supply and stem on deck for flying nailer (not supplied)
- Digital router with electronic variator and suction
- Pneumatic intermediate support device for pinions
- Alignment lasers
- Second inner display with touch control



Warranty 6 months parts and labor.

A/ Features :
Working and lifting station consisting of 3 parallel roller lines 9 m long.
Welded tables, with a fixed and a movable part: 
Moving the panel by manual pushing
Table fixed to the floor, ensuring high rigidity to the assembly
Mechanical tilting on axes and lifting by gas springs
Free interlocking rollers incorporated throughout


B/ Technical specifications :
Working height: 850 mm
Minimum panel width: 1,300 mm
Maximum panel width: 3,800 mm
Table length: 9,000 mm
CE Safety Specifications

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

For Parquet No
For Joinery Yes
-------------------
Worked hours
Hours under power
State good
At local norms yes
Status
Client type Reseller
Active since 2019
Offers online 25
Last activity March 28, 2024

Description

STATION 1 FRAMING AND AUTOMATIC NAILING TABLE
BRAND JJ SMITH type "MOBI-ONE 1038
RECENT EQUIPMENT, SUBERB CONDITION, REVISED AND GUARANTEED
Technical specifications : 

Year: 2012
CNC : Dual control panel with 17' colour touch screens
Display of panel plan, positioning dimensions and zoom function Data recovery drawing software by interface
 TABLES: Mounting tables with a fixed and a movable part, each with a 400 mm wide useful support plane and 850 mm working height
 The mobile part is equipped with pinion gears ensuring the synchronization of the movement over the entire length of the table.
 The rails with racks are fixed to the floor with dowels and adjustment screws, ensuring perfect straightness and rigidity to the assembly.
Motorized mobile table moving by brake motor with adjustable pressure, for clamping the frames. 
BUTEES: At the front, 2 framing stops, and 2 clamps for the first crossbar, can be lifted and retracted pneumatically for the exit of the panel. Control at the desk by solenoid valves.
On each side, along the fixed and movable tables, a row of independent lateral stops, each one pneumatically retractable to retract automatically as the horizontal nailers pass. At the front, the centre distances are 500 mm and then every 850 mm over the rest of the length, i.e. 12 independent clamping stops on each side of the tables.
These 85 mm high stops (for mini panels h=90mm) prevent the upper and lower rails from "opening" upwards and keep them perfectly vertical and square when tightening the frame.
 When moving the MOBI-ONE gantry, the mobile table releases its pressure on the frame, allowing the introduction of a new cross member or subassembly, then tightens the assembly again before the nailing operation.
 GATE: Gantry with 1 motorized moving nailing carriage.
Digital positioning in automatic mode
Programming of nailing distances between centres
Ball slides supporting the nailing carriage
Movement of the carriage by rack and pinion and servomotor
Support for the industrial type nailer(s) (3 maxi)
Option for on-board router, with CNC control
Nailing: Nailing or stapling depending on the type of operations performed.
The mobile upper carriage supports:
- 1 digitized nailer for lathing (ITW ref CW650)
- 1 digitized stapler with loader (ITW Paslode ref S540) for OSB
Motorized movement by industrial servo motor and automatic nailing, with nailing distances programmed on CAD.
Manual adjustment by hand wheel of the height of the nailer supports on vernier.
Option fixed trolley retractable on high boom with stapler (S540)
Independent pneumatic lowering of each nailing unit, with 60 mm stroke, to adapt to differences in frame thickness without prior adjustment (e. g. 145 to 120 mm)
Roller guide on top of the bracing panel
Device for not nailing at openings (optical fiber)
Side nailing: 2 side boxes, integrating the side nailers on the sides of the gantry, and moving on rails, the whole being pneumatically retractable.
Servo cylinders, incorporated in these housings, with movements on THK slides, control the nailers in height, and are configured to receive nailers with extended magazine and pneumatic firing remote control.
Positioning and number of automatic nails according to automatic software programming, on 300 mm stroke.
2 lateral nailers capacity 100 mm (ITW Paslode ref PSN100)

DEFOUNDING : The upper carriage carries a routing unit on the front.

Motorized movement by industrial servo motor and automatic machining, with programmed movements on CAD in X and Y.
Electronic speed variator with programming on the console.
Industrial electro-spindle power 3 KW at 12,000 rpm
Scheduled automatic start
Pneumatic lowering of the routing unit to adapt to all frame thicknesses without prior adjustment (e. g. 145 to 240 mm) Roller guide on top of the bracing panel
Interpolation of axes allowing movements over angles as well as in curves according to defined radius
Dust extractor on board the gantry column, with flexible pipes for connection to the suction nozzle.
Automatic start of suction with the ripping function.
Device for collecting suction around the wick
EVACUATION: 2 lines of free running rollers, incorporated along the entire length of the tables. They can be pneumatically lifted at the end of the nailing, facilitating the exit of the panel to an exit table (manual push).
Control of the lifting on the console by solenoid valve.
OPERATION: Principle of the "5 functions":
- 1st function: Frame assembly with automated lateral nailing
Gantry in position Parking at the end of the frame
Manual installation of the OSB and manual pre-nailing
Maintaining framing and squaring during this operation
- 2nd function: Fully automatic nailing of the bracing
in CNC mode with upper nailers
Programmed nailing distances
Maintaining framing and squaring during this operation
- 3rd function: Tearing down openings and outer edges
with CNC-controlled PN descending router
and suction device on board.
- 4th function: Rainscreen unwinding via device on the gantry
Moving the gantry with automatic removal of the rainscreen
Maintaining framing and squaring during this operation
Manual cutting of the rainscreen and end stapling
- 5th function: Semi-automatic nailing of cleats
Positioning of the automatic gantry above the
crossings. Guidance system. On-board storage rack
Maintaining framing and squaring during this operation
On-screen display of the number of cleats to be loaded
C/ Technical characteristics of the MOBI-ONE :
Minimum panel width................................................................................ 1 300 mm
Stroke of the moving part.................................................................................... 2,500 mm
Either maximum width of the panels........................................................................ 3,800 mm
Maximum panel length............................................................................... 10,000 mm
Minimum panel length................................................................................... 500 mm
Minimum framework thickness................................................................................................ 90 mm

Passage under the tools...................................................................................... 350 mm
 
Important : The fixed table (low smooth) is located on the left hand side as standard.
C/ Technical characteristics of the MOBI-ONE (continued) :
General electrical cabinet integrated in the gantry. 
2 desks with touch-screen colour displays, one inside on a bracket for framing and one outside, touch-screen PC under Windows environment. 
Ergonomic control interface with menu access and visualization of the wall panel under construction. Follow-up of the work by color codes on the amounts. 
CE Safety Specifications
Light curtains on the gantry at the operator's station
Automatic stop device in the event of an obstacle on the fixed column of the gantry
2 light curtains on the movable side 
The average production is estimated at 4 braced panels of 9 m long per day, depending on the panel model, with only one operator, i. e. approximately 100 m2 / day.
E/ Price of the used MOBI-ONE machine: 
Complete handset equipped with:
- Membrane roller holder and software device for automatic removal
- Device for automatic nailing of cleats with CNC control
- Retractable fixed trolley with stapler support on high rail
- Support for second nailer holder on mobile trolley
- Power supply and stem on deck for flying nailer (not supplied)
- Digital router with electronic variator and suction
- Pneumatic intermediate support device for pinions
- Alignment lasers
- Second inner display with touch control



Warranty 6 months parts and labor.

A/ Features :
Working and lifting station consisting of 3 parallel roller lines 9 m long.
Welded tables, with a fixed and a movable part: 
Moving the panel by manual pushing
Table fixed to the floor, ensuring high rigidity to the assembly
Mechanical tilting on axes and lifting by gas springs
Free interlocking rollers incorporated throughout


B/ Technical specifications :
Working height: 850 mm
Minimum panel width: 1,300 mm
Maximum panel width: 3,800 mm
Table length: 9,000 mm
CE Safety Specifications

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

For Parquet No
For Joinery Yes
-------------------
Worked hours
Hours under power
State good
At local norms yes
Status

About this seller

Client type Reseller
Active since 2019
Offers online 25
Last activity March 28, 2024