WIB 65 JINGYE injection-blowing machine - Year 2013
launched 2014

It was used for the production of 11 liter containers from PC

Suitable for HDPE.

Screw diameter [mm] = 65
propeller speed [rpm] = 0 - 180
injection capacity [g] = 750
injection pressure [KN] = 1300
clamping force when blowing [KN] = 200
engine power [KW] = 37
heater power [KW] = 15
purge pressure [MPa] = 1.0 - 2.0
cooling water [bar] = 1 - 3
machine dimensions [mm] = 5200 x 1900 x 3600
machine weight [kg] = 8000

MAXIMUM PARTICULAR DIMENSIONS:

Height [mm] = 300
Diameter [mm] = 300

connected machine ready to be presented during operation

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Extruder diameter 65 mm
Nbr of heads 1
Nbr of stations 2
-------------------
Length x width x height 5200.0 × 1900.0 × 3600.0
Weight 8000 kg
Worked hours 300 hours
Hours under power
State like new
At local norms ---------
Status
Client type User – small or medium company
Active since 2018
Offers online 2
Last activity May 17, 2023

Description

WIB 65 JINGYE injection-blowing machine - Year 2013
launched 2014

It was used for the production of 11 liter containers from PC

Suitable for HDPE.

Screw diameter [mm] = 65
propeller speed [rpm] = 0 - 180
injection capacity [g] = 750
injection pressure [KN] = 1300
clamping force when blowing [KN] = 200
engine power [KW] = 37
heater power [KW] = 15
purge pressure [MPa] = 1.0 - 2.0
cooling water [bar] = 1 - 3
machine dimensions [mm] = 5200 x 1900 x 3600
machine weight [kg] = 8000

MAXIMUM PARTICULAR DIMENSIONS:

Height [mm] = 300
Diameter [mm] = 300

connected machine ready to be presented during operation

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Extruder diameter 65 mm
Nbr of heads 1
Nbr of stations 2
-------------------
Length x width x height 5200.0 × 1900.0 × 3600.0
Weight 8000 kg
Worked hours 300 hours
Hours under power
State like new
At local norms ---------
Status

About this seller

Client type User – small or medium company
Active since 2018
Offers online 2
Last activity May 17, 2023

Here is a selection of similar machines

Jingye WIB-65 Blowmoulding machine