|Tablet Ø||25.4 mm|
|Nbr of stations|
|Length x width x height||850.0 mm × 790.0 mm × 1710.0 mm|
|Hours under power|
|At local norms||---------|
Mechanical Compression Control
Meets cGMP standards
3 ton Pre-compression
10 ton main compression
Production Area Separate From Drive Mechanism For Clean Operation
Easy Maintenance And Cleaning
For Medium-Scale Production Runs
Our “H” series Rotary Tablet Presses, Models JC-RT-16H / JC-RT-20H / JCRT-24H are proven to be reliable for-:
Efficient medium size production runs, with capacity upto 100,000 tablets per hour
Laboratory and pilot plant studies
Cam Design & Lubrication
A central lubrication system supplies oil continuously to lower punches, while grease applied manually lubricates upper punches. The ejection cam is manufactured from special tool steel for extended life, while a double sided lifting cam is provided.
Upper & Lower Punch Seals
The scrapers seals for the upper punches protect tablets from oil drip, while the dust seals on the lowers prevent the punches from binding and reduce wear on the cam. This combined with an efficient dust extraction system allows prolonged run with little downtime for cleaning.
Direct Rotation of Turret
Direct rotation of the turret by the main shaft reduces the moise level; it provide maximum protection to the gears and the drive system.
Pre-Compression and Main Compression
High pre-compression of 3000 kgs insures trouble-free processing of difficult granules. It helps in the direct compaction of materials, reducing lamination and capping. Pressure rollers are made of special tool steel that ensures uniform pressure application. The double bearings are fitted, which minimize wearing of the rollers.
The feeder support platform is preset at the factory to the correct height and should not require adjustment. Quick release clamping screws allows removal of the feeder for cleaning and tool changeover without the need to disturb the feeder platform setting.
The two chambers feeding system has been improved further. It is driven from top by a variable speed motor. The unit can be assembled or disassembled easily.
Cleaning and Tool Changeover
The detachable panels can be removed easily, which reveal the entire bottom punch cams. This allows easy removal of the bottom punches. Upper punch monitoring device is available that would switch off the machine in the event of punch tightness.
MODEL JC-RT-16H JC-RT-20H JC-RT-24H
Type of tooling EU”D” IPT”D” EU”DB” EU”B” IPT”B” EU”BB” IPT”BB”
Tablet diameter Max. 25.4mm 19mm(caplet) 16mm 13mm
Production capacity (tablets/hour) * 17,000-69,000 21,500-86,000 25,900-103,000
Revolution of turret / Min (60 cyc)* 18-72 RPM
Depth of fill adjustable to 19mm 117mm
Maximum operating pressure 10,000kgs
Maximum pre-pressure 3,000kgs
Diameter of die 38.1mm 30.16mm 24mm
Height of die 23.81mm 22.22mm
Nominal diameter of punch body 25.4 mm 19 mm
Turret P.C.D. 253 mm
Power consumption 3HP (2.2kw)
Machine dimensions 850x790x1,710mm (not including hopper)
Net weight 1,200 kgs
Please note that this description may have been translated automatically. Contact us for further information.