Price on request
View price| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Last availability date | 28/04/2026 |
This Italpresse Mark C/ 14-27.5/2 is a single-deck continuous-cycle wood press manufactured in 2014. Designed with a top piston and compliant with CE safety standards, it is suited for industrial wood pressing applications. The machine features two heating plates measuring 1400 x 2750 mm each, with a single tier and a cylinder stroke of 200 mm. It provides a specific pressure of 25 kg/cm² at 100% capacity, delivering a total pressure of 9620 kN. The press operates at temperatures up to 135°C, with a maximum surface operating temperature of 150°C, utilizing thermal oil as the heating medium.
Equipped with six press cylinders of 270 mm diameter and four retraction cylinders, the machine operates at a pressure of 290 bar. The closing and opening speeds are both 50 mm/sec. Its cycle time ranges from 2 to 30 minutes, allowing for flexible production rates. Mold specifications include external dimensions of 1340 x 2540 mm and a maximum weight of 250 kg; however, molds are not included but can be purchased separately.
The press includes powered sheet feeding conveyors measuring 1400 x 3500 mm, with feed speeds adjustable between 8 and 40 m/min, controlled by photoelectric sensors. Additional features include an electropneumatic vibrating device for the upper Mylar film, electronic flatness control, automatic switching to pressing speed, and a compressed air system in the lower pressing table. Cylinder support plates are insulated and drilled for water cooling, enhancing operational stability. Frequency control of feed speed and powered exit roller conveyors of the same dimensions as the feeding conveyors are also provided.
The machine is equipped with an electrical control cabinet and an operating panel featuring a touchscreen interface and multiple buttons, including an emergency stop for safety. The control panel and the machine show signs of industrial use with some dirt and wear but no visible damage. The conveyor system includes metal rollers and a chain drive, visible piping and valves are connected to the machine, indicating a complete setup ready for integration into a production line. Overall, this Italpresse wood press offers robust industrial capabilities with comprehensive control and safety features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Single-deck continuous-cycle press with top piston, manufactured in 2014
Machine operates flawlessly
CE safety standards
The machine can also be purchased together with other machines to form a complete production line.
Heating plate dimensions: 1400x2750 mm
Number of heating plates: 2
Number of tiers: 1
Cylinder stroke: 200 mm
Tier opening: 200 mm
Loading side: 1400 mm
Specific pressure at 100%: 25 kg/cm²
Total pressure: 9620 kN
Cycle time: 2–30 min.
Operating temperature: 135°C
Max. surface operating temperature: 150°C
Intended heating medium: thermal oil
Number of press cylinders: 6
Diameter of press cylinders: 270 mm
Retraction cylinders: 4 pcs.
Operating pressure: 290 bar
Closing speed: 50 mm/sec.
Opening speed: 50 mm/sec.
Operating voltage: 400 V
Mold specifications
External dimensions of molds: 1340x2540 mm
Max. weight of molds: 250 kg
Mold cover dimensions: 1200x2400
Molds are excluded from this offer
But are available at an additional cost
Powered sheet feeding conveyors:
Dimensions: 1400x3500 mm
Feed speed: 8-40 m/min
Photoelectric sensor control
Electropneumatic vibrating device for the upper Mylar film
Electronic flatness control
Automatic switching to pressing speed
Compressed air system in the lower pressing table
Cylinder support plates insulated and drilled through the solid material for water cooling
Frequency control of feed speed
Powered exit roller conveyors Dimensions: 1400x3500 mm
Electrical control cabinet/Operating panel
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 3 |
| Last activity | May 14, 2026 |
Single-deck continuous-cycle press with top piston, manufactured in 2014
Machine operates flawlessly
CE safety standards
The machine can also be purchased together with other machines to form a complete production line.
Heating plate dimensions: 1400x2750 mm
Number of heating plates: 2
Number of tiers: 1
Cylinder stroke: 200 mm
Tier opening: 200 mm
Loading side: 1400 mm
Specific pressure at 100%: 25 kg/cm²
Total pressure: 9620 kN
Cycle time: 2–30 min.
Operating temperature: 135°C
Max. surface operating temperature: 150°C
Intended heating medium: thermal oil
Number of press cylinders: 6
Diameter of press cylinders: 270 mm
Retraction cylinders: 4 pcs.
Operating pressure: 290 bar
Closing speed: 50 mm/sec.
Opening speed: 50 mm/sec.
Operating voltage: 400 V
Mold specifications
External dimensions of molds: 1340x2540 mm
Max. weight of molds: 250 kg
Mold cover dimensions: 1200x2400
Molds are excluded from this offer
But are available at an additional cost
Powered sheet feeding conveyors:
Dimensions: 1400x3500 mm
Feed speed: 8-40 m/min
Photoelectric sensor control
Electropneumatic vibrating device for the upper Mylar film
Electronic flatness control
Automatic switching to pressing speed
Compressed air system in the lower pressing table
Cylinder support plates insulated and drilled through the solid material for water cooling
Frequency control of feed speed
Powered exit roller conveyors Dimensions: 1400x3500 mm
Electrical control cabinet/Operating panel
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Last availability date | 28/04/2026 |
This Italpresse Mark C/ 14-27.5/2 is a single-deck continuous-cycle wood press manufactured in 2014. Designed with a top piston and compliant with CE safety standards, it is suited for industrial wood pressing applications. The machine features two heating plates measuring 1400 x 2750 mm each, with a single tier and a cylinder stroke of 200 mm. It provides a specific pressure of 25 kg/cm² at 100% capacity, delivering a total pressure of 9620 kN. The press operates at temperatures up to 135°C, with a maximum surface operating temperature of 150°C, utilizing thermal oil as the heating medium.
Equipped with six press cylinders of 270 mm diameter and four retraction cylinders, the machine operates at a pressure of 290 bar. The closing and opening speeds are both 50 mm/sec. Its cycle time ranges from 2 to 30 minutes, allowing for flexible production rates. Mold specifications include external dimensions of 1340 x 2540 mm and a maximum weight of 250 kg; however, molds are not included but can be purchased separately.
The press includes powered sheet feeding conveyors measuring 1400 x 3500 mm, with feed speeds adjustable between 8 and 40 m/min, controlled by photoelectric sensors. Additional features include an electropneumatic vibrating device for the upper Mylar film, electronic flatness control, automatic switching to pressing speed, and a compressed air system in the lower pressing table. Cylinder support plates are insulated and drilled for water cooling, enhancing operational stability. Frequency control of feed speed and powered exit roller conveyors of the same dimensions as the feeding conveyors are also provided.
The machine is equipped with an electrical control cabinet and an operating panel featuring a touchscreen interface and multiple buttons, including an emergency stop for safety. The control panel and the machine show signs of industrial use with some dirt and wear but no visible damage. The conveyor system includes metal rollers and a chain drive, visible piping and valves are connected to the machine, indicating a complete setup ready for integration into a production line. Overall, this Italpresse wood press offers robust industrial capabilities with comprehensive control and safety features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 3 |
| Last activity | May 14, 2026 |
Използвана преса Italpresse Mark C/ 14-27,5/2 за дърво
Použitý lis na dřevo Italpresse Mark C/ 14–27,5/2
Brugt Italpresse Mark C/ 14-27,5/2 træpresse
Gebrauchte Italpresse Mark C/ 14-27,5/2 Holzpresse
Μεταχειρισμένη πρέσα ξύλου Italpresse Mark C/ 14-27,5/2
Used Italpresse Mark C/ 14-27.5/2 Wood press
Prensa de madera Italpresse Mark C/ 14-27,5/2 de segunda mano
Presse à bois Italpresse Mark C/ 14-27,5/2 d'occasion
Rabljena Italpresse Marka C/ 14-27,5/2 drvena preša
Használt Italpresse Mark C/ 14-27,5/2 fa prés
Pressa per legno Italpresse Mark C/ 14-27,5/2 usata
Naudota „Italpresse“ Mark C/ 14–27,5/2 medienos presas
Gebruikte Italpresse Mark C/ 14-27,5/2 houtpers
Używana prasa do drewna Italpresse Mark C/ 14-27,5/2
Prensa de madeira Italpresse Mark C/ 14-27,5/2 usada
Presă Italpresse Mark C/ 14-27,5/2 pentru lemn, second-hand
Б/у пресс Italpresse Mark C/ 14-27,5/2 для дерева
Korišćena Italpresse Mark C/ 14-27.5/2 drvena presa
Begagnad Italpresse Mark C/ 14-27,5/2 träpress
İkinci el Italpresse Mark C/ 14-27,5/2 Ahşap pres
EN
- Languages
English (GB)