Sorry, this offer is no longer available on Exapro

ISE ISL 205 Cross and longitudinal saw for laminate floorboards

Here is a selection of similar machines

Cross and longitudinal saw for laminate floorboards
Manufacturer: ISE
Type: ISL 205
Year of manufacture: 2003

Technical data:

Raw board format:
Length: 2440 / 2620 / 2640 / 2650mm
Width: 2070 / 2080mm
thickness: 5-12mm
max. cupping approx. 30mm

Coreboard: HDF / MDF
Surface melamine resin foil
Blanks for raw formats:
- Length: 1210/1308mm
- Width:: 202 / 337 /407mm
- Thickness: 5-12mm

Plant consists of:
- Alignment station
- Continuous saw for longitudinal ripping of panels
- Angle transfer for lengthwise split panels
- Throughfeed saw crosswise

Alignment station:
Alignment according to fixed points, further transport in defined position, stop on left side

- Workpiece thickness 6-20mm
- Workpiece length: 2900mm
- Workpiece width: 2100mm
- Number of cycles: 6 pieces / min.

Throughfeed saw for longitudinal ripping of panels
- Feed rate 15-60 m/min.
- Workpiece thickness: 6-40mm
- Blank length 900mm
- Blank width 2100mm
- working height 1400mm

- 7,5 kW hogging unit
- Sawing unit 4,5 kW

- Workpiece thickness 6-20mm
- Workpiece length: 2900mm
- Workpiece width: 2100mm

Throughfeed saw cross
Double-sided format processing unit with centre support for transverse ripping of panels

Top pressure with V-belt in the format processing unit

- Feed rate 20-60 m/min.
- Workpiece thickness 6-20mm
- Cutting width min. 650mm
- Blank length 198-420mm
- Working height 1250mm

- Automatic width adjustment Format processing unit and centre chain conveyor

Camera station cross
- Camera for detection of fixed lines in the decor

- Hogging unit 6,6 kW
- Standard milling unit 8,1 kW
- Sawing unit 7.5 kW

Horizontal turning on good side

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

For Parquet Yes
For Doors No
For Windows No
For Joinery No
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible
Client type Reseller
Active since 2013
Offers online 33
Last activity March 28, 2024

Description

Cross and longitudinal saw for laminate floorboards
Manufacturer: ISE
Type: ISL 205
Year of manufacture: 2003

Technical data:

Raw board format:
Length: 2440 / 2620 / 2640 / 2650mm
Width: 2070 / 2080mm
thickness: 5-12mm
max. cupping approx. 30mm

Coreboard: HDF / MDF
Surface melamine resin foil
Blanks for raw formats:
- Length: 1210/1308mm
- Width:: 202 / 337 /407mm
- Thickness: 5-12mm

Plant consists of:
- Alignment station
- Continuous saw for longitudinal ripping of panels
- Angle transfer for lengthwise split panels
- Throughfeed saw crosswise

Alignment station:
Alignment according to fixed points, further transport in defined position, stop on left side

- Workpiece thickness 6-20mm
- Workpiece length: 2900mm
- Workpiece width: 2100mm
- Number of cycles: 6 pieces / min.

Throughfeed saw for longitudinal ripping of panels
- Feed rate 15-60 m/min.
- Workpiece thickness: 6-40mm
- Blank length 900mm
- Blank width 2100mm
- working height 1400mm

- 7,5 kW hogging unit
- Sawing unit 4,5 kW

- Workpiece thickness 6-20mm
- Workpiece length: 2900mm
- Workpiece width: 2100mm

Throughfeed saw cross
Double-sided format processing unit with centre support for transverse ripping of panels

Top pressure with V-belt in the format processing unit

- Feed rate 20-60 m/min.
- Workpiece thickness 6-20mm
- Cutting width min. 650mm
- Blank length 198-420mm
- Working height 1250mm

- Automatic width adjustment Format processing unit and centre chain conveyor

Camera station cross
- Camera for detection of fixed lines in the decor

- Hogging unit 6,6 kW
- Standard milling unit 8,1 kW
- Sawing unit 7.5 kW

Horizontal turning on good side

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

For Parquet Yes
For Doors No
For Windows No
For Joinery No
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2013
Offers online 33
Last activity March 28, 2024