Specifications

Plates length  mm
Plates width  mm
Hot
Cold
Total pressure  T
Specific pressure kg/cm2  kg/cm²
-------------------
Length x width x height - × - × -
Weight  kg
worked hours
hours under power
state as-is, where-is
At local norms ---------
status
Datasheet Interwood HOP
Last availability date 29/04/2026

Automatic description (AI-Generated)

This listing features an Interwood HOP veneer press, manufactured in 2011 by Interwood Ltd., Maldon, Essex, England. It is a single daylight type press designed for wood veneering applications. The machine is oil heated and operates on a 3-phase power supply with a power rating of 54 kW. It features a maximum daylight opening of 300 mm and is equipped with hydraulic rams of 85 mm diameter capable of exerting a maximum pressure of 120 tonnes. The press includes an automatic opening timer set to 60 seconds, facilitating controlled operation cycles.

The machine is painted in blue and white and shows signs of use, including some dirt and wear marks on the lower white panels and frame, consistent with typical industrial usage. Visible components include five vertical hydraulic cylinders and hydraulic hoses connected to the machine, indicating its hydraulic operation system. A control panel with gauges and buttons is located on the right side, enabling operator control and monitoring.

For safety, the press is equipped with mesh guarding around the pressing area, marked with yellow and black hazard tape. Warning signs are present, including notices restricting unauthorized use and high voltage danger warnings, with instructions to turn off power before servicing. These safety features underline the importance of careful operation.

Overall, this Interwood HOP veneer press is a robust industrial machine suitable for wood veneering tasks, combining hydraulic pressing with oil heating technology. Its condition reflects prior use but appears structurally intact with essential safety measures in place.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

Interwood HOP Single Daylight, Oil Heated, Veneer Press, 10×5

2011 Interwood HOP Veneer Press
Oil Heated
10×5
Single Daylight
3 Phase, 54kw
Maximum daylight 300mm
Diameter of rams 85mm
Maximum pressure 120 tonnes
Automatic opening timer 60 seconds
Interwood HOP Single Daylight, Oil Heated, Veneer Press, 10×5 quantity
Add to basket Categories: Used, Veneer Press, Woodwork

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type Machinery dealer
Active since 2025
Offers online 13
Last activity April 24, 2026

Seller's description

Interwood HOP Single Daylight, Oil Heated, Veneer Press, 10×5

2011 Interwood HOP Veneer Press
Oil Heated
10×5
Single Daylight
3 Phase, 54kw
Maximum daylight 300mm
Diameter of rams 85mm
Maximum pressure 120 tonnes
Automatic opening timer 60 seconds
Interwood HOP Single Daylight, Oil Heated, Veneer Press, 10×5 quantity
Add to basket Categories: Used, Veneer Press, Woodwork

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Plates length  mm
Plates width  mm
Hot
Cold
Total pressure  T
Specific pressure kg/cm2  kg/cm²
-------------------
Length x width x height - × - × -
Weight  kg
worked hours
hours under power
state as-is, where-is
At local norms ---------
status
Datasheet Interwood HOP
Last availability date 29/04/2026

Automatic description (AI-Generated)

This listing features an Interwood HOP veneer press, manufactured in 2011 by Interwood Ltd., Maldon, Essex, England. It is a single daylight type press designed for wood veneering applications. The machine is oil heated and operates on a 3-phase power supply with a power rating of 54 kW. It features a maximum daylight opening of 300 mm and is equipped with hydraulic rams of 85 mm diameter capable of exerting a maximum pressure of 120 tonnes. The press includes an automatic opening timer set to 60 seconds, facilitating controlled operation cycles.

The machine is painted in blue and white and shows signs of use, including some dirt and wear marks on the lower white panels and frame, consistent with typical industrial usage. Visible components include five vertical hydraulic cylinders and hydraulic hoses connected to the machine, indicating its hydraulic operation system. A control panel with gauges and buttons is located on the right side, enabling operator control and monitoring.

For safety, the press is equipped with mesh guarding around the pressing area, marked with yellow and black hazard tape. Warning signs are present, including notices restricting unauthorized use and high voltage danger warnings, with instructions to turn off power before servicing. These safety features underline the importance of careful operation.

Overall, this Interwood HOP veneer press is a robust industrial machine suitable for wood veneering tasks, combining hydraulic pressing with oil heating technology. Its condition reflects prior use but appears structurally intact with essential safety measures in place.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


About this seller

Client type Machinery dealer
Active since 2025
Offers online 13
Last activity April 24, 2026

Here is a selection of similar machines - Interwood HOP

Interwood HOP Wood press