Illig RV 53 thermoforming machine
Year: 1990
Model: RV 53
Molding area (VxH): 500 × 350
Molding depth: 100 mm
Material thickness (min): 0.10 mm
Material thickness (max.): 1.40 mm
Feed systems: roll fed
Lower mobile table
stacker
Machine in production

The stacker is incomplete, the top and bottom table components are missing.

Cutting station fully operational, regeneration was 2 years ago, heating of the cutting station fully operational, upper and lower table in good condition, heating 100% efficient.

Capacity approx. 25 cycles per minute.

Cutting station regeneration, pump regeneration, chain regeneration,

The drive for transporting the film has been replaced with a servo motor with an inverter

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Max sheet length 500 mm
Max sheet width 350 mm
Forming depth 100 mm
Total power requirement 23.3 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status in production
Datasheet Illig RV 53
Client type User – small or medium company
Active since 2014
Offers online 3
Last activity March 28, 2024

Description

Illig RV 53 thermoforming machine
Year: 1990
Model: RV 53
Molding area (VxH): 500 × 350
Molding depth: 100 mm
Material thickness (min): 0.10 mm
Material thickness (max.): 1.40 mm
Feed systems: roll fed
Lower mobile table
stacker
Machine in production

The stacker is incomplete, the top and bottom table components are missing.

Cutting station fully operational, regeneration was 2 years ago, heating of the cutting station fully operational, upper and lower table in good condition, heating 100% efficient.

Capacity approx. 25 cycles per minute.

Cutting station regeneration, pump regeneration, chain regeneration,

The drive for transporting the film has been replaced with a servo motor with an inverter

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Max sheet length 500 mm
Max sheet width 350 mm
Forming depth 100 mm
Total power requirement 23.3 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status in production

About this seller

Client type User – small or medium company
Active since 2014
Offers online 3
Last activity March 28, 2024

Here is a selection of similar machines

Illig RV 53 Thermoforming - Automatic Roll-Fed Machine