SWING thermoforming machine with preheating station 2heat (using a complete 8-socket mold with a stacking device for manufacturing PP-stack.)
Complete thermoforming machine SWING, made in GABLER Thermoform GmbH & Co., 2014 Designed for the manufacture of plastic cups of PP, PS, PET, HIPS and other thermoforming polymers using cutting punch (molding and cutting down together).
Manufacturer: GABLER Thermoform GmbH & Co., Germany.
Date of acceptance to accounting: 04/30/2014.
Main technical characteristics:
Area of forming surface, mm Maximum - 450x220
Minimum - 430x180
Maximum width of the tape, mm 480
Maximum tape thickness, mm 2
Maximum depth of molding, mm 125
Maximum noise level, dB Not more than 80
Tact at idle, tact / min 44
Mechanical performance, cycles / min 21-25
Voltage 230 / 400V, 50Hz
Total power consumption, kW 64.15
Operating air pressure, bar 8
Dimensions (length x width x height), mm Thermoforming machine (including stacking-counting device): 6000 11400 x 3000 x 2870 (including crane)
Control cabinet: 1000 x 250 (G) x 1800,
Distribution cabinet: 1600 x 400 (G) x 1800
Shipping weight kg 8435
Operational characteristics: equipment operation requires the supply of a three-phase AC network, compressed air with a pressure of 8 Bar, and coolant.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Length x width x height 11400.0 × 3000.0 × 2870.0
Weight 8435 kg
Worked hours
Hours under power
State excellent
At local norms ---------
Status
Client type User – small or medium company
Active since 2019
Offers online 4
Last activity March 27, 2024

Description

SWING thermoforming machine with preheating station 2heat (using a complete 8-socket mold with a stacking device for manufacturing PP-stack.)
Complete thermoforming machine SWING, made in GABLER Thermoform GmbH & Co., 2014 Designed for the manufacture of plastic cups of PP, PS, PET, HIPS and other thermoforming polymers using cutting punch (molding and cutting down together).
Manufacturer: GABLER Thermoform GmbH & Co., Germany.
Date of acceptance to accounting: 04/30/2014.
Main technical characteristics:
Area of forming surface, mm Maximum - 450x220
Minimum - 430x180
Maximum width of the tape, mm 480
Maximum tape thickness, mm 2
Maximum depth of molding, mm 125
Maximum noise level, dB Not more than 80
Tact at idle, tact / min 44
Mechanical performance, cycles / min 21-25
Voltage 230 / 400V, 50Hz
Total power consumption, kW 64.15
Operating air pressure, bar 8
Dimensions (length x width x height), mm Thermoforming machine (including stacking-counting device): 6000 11400 x 3000 x 2870 (including crane)
Control cabinet: 1000 x 250 (G) x 1800,
Distribution cabinet: 1600 x 400 (G) x 1800
Shipping weight kg 8435
Operational characteristics: equipment operation requires the supply of a three-phase AC network, compressed air with a pressure of 8 Bar, and coolant.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Length x width x height 11400.0 × 3000.0 × 2870.0
Weight 8435 kg
Worked hours
Hours under power
State excellent
At local norms ---------
Status

About this seller

Client type User – small or medium company
Active since 2019
Offers online 4
Last activity March 27, 2024

Here is a selection of similar machines

Gabler SWING Blowmoulding machine