IDM LEVEL KS Single sided edgebander
Price on request
| Board thickness | 60 mm |
| Edge thickness | 0.4 mm |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status |
The IDM LEVEL KS is a robust single-sided edgebanding machine designed for industrial use, featuring a steel bench constructed from a highly rigid tubular structure that provides optimal support for all operating groups. The machine includes a control panel positioned ergonomically at the entrance, equipped with multiple buttons and a display for user-friendly operation. Transport of boards is facilitated by rollers extending along the machine's length, ensuring smooth handling. The working area is enclosed with transparent protective covers, offering visibility while maintaining safety.
Safety features include integral protection cabins and multiple electrical hazard warning labels on the machine body. The electrical installation incorporates a general switch with a blocking device and thermal relays to protect the motors. Emergency pushbuttons are installed at both the entrance and exit points of the machine for immediate shutdown if necessary.
Board transportation is managed by an advance chain with high-adhesion rubber-covered skates running on industrial tracks, sliding on hardened, rectified steel guides to maintain straightness and resist lateral loads. The upper presser consists of a steel carpentry frame with rubber pressure wheels, and manual lifting of the clamp allows automatic positioning of operating groups when changing panel thickness, which can be digitally measured.
The glue deposit group includes a fast-heating hot melt glue tank with a Teflon interior for easy glue replacement, a glue diffuser roller, and a digital thermoregulator for temperature control. It also features automatic recovery of unused glue, an automatic roll edge loader with a cutter for edges up to 3 mm thick, and pressure rollers with mechanical regulation.
Technical specifications include a working height range of 8 mm to 60 mm and edge thickness capability from 0.4 mm to 12 mm for strips, with rolled edges up to 3 mm thick. The machine supports minimum panel widths of 65 mm and minimum board lengths of 200 mm when using rolled edges.
Additional work groups integrated into the machine include diamond burs, cutting discs with pneumatic inclination, tilting scrubber groups, pneumatic changeable edge forms, edge scraper groups, tail scratching groups, and cleaning cloths. The machine is equipped with a PC-controlled numerical system featuring PLC technology, customizable programs, quick function keys, statistical data tracking, and guided diagnostics.
Overall, the IDM LEVEL KS edgebander is a well-maintained, clean machine with enclosed sections and a comprehensive control panel, offering a complete and safe solution for precise and efficient edgebanding operations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
GENERAL CHARACTERISTICS:
Machine bench in steel, made of a highly rigid tubular structure that constitutes an optimal support for the operating groups.
Control panel at the entrance of the machine, in ergonomic position.
Board transport rollers along the length of the machine.
Integral protection cabin.
Electrical installation with general switch with blocking device and thermal relays to protect the motors.
Emergency pushbutton at the entrance and exit of the machine.
BOARD TRANSPORTATION SYSTEM:
Advance chain with high adhesion rubber covered skates fixed on industrial track.
The sliding of the skids is carried out on two hardened and rectified steel guides, one with a flat section, to guarantee straightness of advance and resistance to lateral loads.
Upper presser in steel carpentry with rubber pressure wheels.
Manual lifting of the clamp with automatic positioning of the operating groups when changing the panel thickness.
Digital mechanical indicator of the thickness of the selected board.
The machine is completed in addition to:
Centralized aspiration.
Board support rollers along the entire length of the machine.
Protection cabin.
Electrical installation with general switch with the possibility of installing a padlock and thermal relays to protect the motors.
Emergency button.
Transformer for auxiliary circuit: 110 V.
GLUE DEPOSIT GROUP WITH PREFUSER, LOAD AND EDGE PRESSURE:
Tank for hot melt glue and fast heating, internally tefloned to facilitate the replacement of the glue.
Glue diffuser roller for spreading it on the board.
Control of the temperature of the applied glue thanks to a digital thermoregulator.
Device for automatic recovery of unused queue.
Automatic roll edge loader with cutter for thin edges up to 3 mm thick.
Automatic loader for rolled edges and strips with cutter for edges up to 3 mm thick,
complete with economizer device that allows optimizing the use of the edge. Pressure rollers with two rollers of which the first is motorized and frictioned. Both are equipped with mechanical pressure regulation.
Automatic lowering of the glue tank temperature after a period of machine inactivity.
Regulation of the position of the external pressure rollers, outside the protection cabin.
MANAGEMENT SYSTEM THROUGH PC CONTROL
Numerical control system provided with P.L.C. eliminates the relay and the microswitch allowing a simple and immediate use of all the functions of the machine.
Programs that can be tailored to production requirements
Function keys for quick selection of workgroups.
Statistical work data.
Integrated, simple and guided diagnosis.
TECHNICAL DATA:
Working height: 8mm - 60mm
Edge thickness in strips: 0.4 mm - 12 mm
Thickness of rolled edges (mod. E): 0.4 mm - 3 mm
Minimum panel width: 65 mm
With roll edge: 60 mm
Minimum board length: With rolled edge: 200 mm
INPUT TUPI GROUP:
Motor power: 2.4 kw.
GLUING GROUP:
Absorbed power: 2.4 kw.
Glue capacity: 1.5 kg.
K / SEL RETAINER GROUP:
Power of each of the motors: 0.35 kg
Strawberry rotation speed: 12000 rpm
Saw incline: 0 / 15º degrees
REFILER GROUP RI 100:
Tool inclination: 0 / 25º
Power of each of the motors: 0.35 kw
Strawberry rotation speed: 12000 rpm
ROUNDING GROUP “ROUND K”:
Power of each of the motors: 0.55 kw
Strawberry rotation speed: 12000 rpm
BRUSHES GROUP SPN:
Motor power: 0.55 kw
Rotation speed: 3000 rpm
Chain feed speed: 11 m / min
WORK GROUPS:
Group Nº2 tupis diamond burs.
Board gluing roller group.
Group Nº2 cutting discs with pneumatic inclination: 15º.
Tilting upper and lower scrubber group.
Group of forms 2 motors with pneumatic change of thin / thick edge.
Upper and lower edge scraper group with pneumatic exclusion.
Upper and lower tail scratching group.
Cleaning cloths group.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 28 |
| Last activity | March 7, 2026 |
RICOMAQ 2004, S.L. is a dynamic Spanish company specializing in the wholesale trade of industrial machinery. With over two decades of experience, they have established themselves as a trusted partner for businesses seeking high-quality equipment solutions. Their extensive product range includes both new and pre-owned machinery, catering to various industrial sectors. Whether you're looking to purchase, repair, or rent equipment, RICOMAQ 2004, S.L. offers comprehensive services to meet your needs. The company's commitment to customer satisfaction is evident through their personalized approach, ensuring that each client receives tailored solutions that align with their specific requirements. By choosing RICOMAQ 2004, S.L., businesses gain access to a reliable partner dedicated to enhancing operational efficiency and driving success.
GENERAL CHARACTERISTICS:
Machine bench in steel, made of a highly rigid tubular structure that constitutes an optimal support for the operating groups.
Control panel at the entrance of the machine, in ergonomic position.
Board transport rollers along the length of the machine.
Integral protection cabin.
Electrical installation with general switch with blocking device and thermal relays to protect the motors.
Emergency pushbutton at the entrance and exit of the machine.
BOARD TRANSPORTATION SYSTEM:
Advance chain with high adhesion rubber covered skates fixed on industrial track.
The sliding of the skids is carried out on two hardened and rectified steel guides, one with a flat section, to guarantee straightness of advance and resistance to lateral loads.
Upper presser in steel carpentry with rubber pressure wheels.
Manual lifting of the clamp with automatic positioning of the operating groups when changing the panel thickness.
Digital mechanical indicator of the thickness of the selected board.
The machine is completed in addition to:
Centralized aspiration.
Board support rollers along the entire length of the machine.
Protection cabin.
Electrical installation with general switch with the possibility of installing a padlock and thermal relays to protect the motors.
Emergency button.
Transformer for auxiliary circuit: 110 V.
GLUE DEPOSIT GROUP WITH PREFUSER, LOAD AND EDGE PRESSURE:
Tank for hot melt glue and fast heating, internally tefloned to facilitate the replacement of the glue.
Glue diffuser roller for spreading it on the board.
Control of the temperature of the applied glue thanks to a digital thermoregulator.
Device for automatic recovery of unused queue.
Automatic roll edge loader with cutter for thin edges up to 3 mm thick.
Automatic loader for rolled edges and strips with cutter for edges up to 3 mm thick,
complete with economizer device that allows optimizing the use of the edge. Pressure rollers with two rollers of which the first is motorized and frictioned. Both are equipped with mechanical pressure regulation.
Automatic lowering of the glue tank temperature after a period of machine inactivity.
Regulation of the position of the external pressure rollers, outside the protection cabin.
MANAGEMENT SYSTEM THROUGH PC CONTROL
Numerical control system provided with P.L.C. eliminates the relay and the microswitch allowing a simple and immediate use of all the functions of the machine.
Programs that can be tailored to production requirements
Function keys for quick selection of workgroups.
Statistical work data.
Integrated, simple and guided diagnosis.
TECHNICAL DATA:
Working height: 8mm - 60mm
Edge thickness in strips: 0.4 mm - 12 mm
Thickness of rolled edges (mod. E): 0.4 mm - 3 mm
Minimum panel width: 65 mm
With roll edge: 60 mm
Minimum board length: With rolled edge: 200 mm
INPUT TUPI GROUP:
Motor power: 2.4 kw.
GLUING GROUP:
Absorbed power: 2.4 kw.
Glue capacity: 1.5 kg.
K / SEL RETAINER GROUP:
Power of each of the motors: 0.35 kg
Strawberry rotation speed: 12000 rpm
Saw incline: 0 / 15º degrees
REFILER GROUP RI 100:
Tool inclination: 0 / 25º
Power of each of the motors: 0.35 kw
Strawberry rotation speed: 12000 rpm
ROUNDING GROUP “ROUND K”:
Power of each of the motors: 0.55 kw
Strawberry rotation speed: 12000 rpm
BRUSHES GROUP SPN:
Motor power: 0.55 kw
Rotation speed: 3000 rpm
Chain feed speed: 11 m / min
WORK GROUPS:
Group Nº2 tupis diamond burs.
Board gluing roller group.
Group Nº2 cutting discs with pneumatic inclination: 15º.
Tilting upper and lower scrubber group.
Group of forms 2 motors with pneumatic change of thin / thick edge.
Upper and lower edge scraper group with pneumatic exclusion.
Upper and lower tail scratching group.
Cleaning cloths group.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Board thickness | 60 mm |
| Edge thickness | 0.4 mm |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | yes |
| status |
The IDM LEVEL KS is a robust single-sided edgebanding machine designed for industrial use, featuring a steel bench constructed from a highly rigid tubular structure that provides optimal support for all operating groups. The machine includes a control panel positioned ergonomically at the entrance, equipped with multiple buttons and a display for user-friendly operation. Transport of boards is facilitated by rollers extending along the machine's length, ensuring smooth handling. The working area is enclosed with transparent protective covers, offering visibility while maintaining safety.
Safety features include integral protection cabins and multiple electrical hazard warning labels on the machine body. The electrical installation incorporates a general switch with a blocking device and thermal relays to protect the motors. Emergency pushbuttons are installed at both the entrance and exit points of the machine for immediate shutdown if necessary.
Board transportation is managed by an advance chain with high-adhesion rubber-covered skates running on industrial tracks, sliding on hardened, rectified steel guides to maintain straightness and resist lateral loads. The upper presser consists of a steel carpentry frame with rubber pressure wheels, and manual lifting of the clamp allows automatic positioning of operating groups when changing panel thickness, which can be digitally measured.
The glue deposit group includes a fast-heating hot melt glue tank with a Teflon interior for easy glue replacement, a glue diffuser roller, and a digital thermoregulator for temperature control. It also features automatic recovery of unused glue, an automatic roll edge loader with a cutter for edges up to 3 mm thick, and pressure rollers with mechanical regulation.
Technical specifications include a working height range of 8 mm to 60 mm and edge thickness capability from 0.4 mm to 12 mm for strips, with rolled edges up to 3 mm thick. The machine supports minimum panel widths of 65 mm and minimum board lengths of 200 mm when using rolled edges.
Additional work groups integrated into the machine include diamond burs, cutting discs with pneumatic inclination, tilting scrubber groups, pneumatic changeable edge forms, edge scraper groups, tail scratching groups, and cleaning cloths. The machine is equipped with a PC-controlled numerical system featuring PLC technology, customizable programs, quick function keys, statistical data tracking, and guided diagnostics.
Overall, the IDM LEVEL KS edgebander is a well-maintained, clean machine with enclosed sections and a comprehensive control panel, offering a complete and safe solution for precise and efficient edgebanding operations.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 28 |
| Last activity | March 7, 2026 |
RICOMAQ 2004, S.L. is a dynamic Spanish company specializing in the wholesale trade of industrial machinery. With over two decades of experience, they have established themselves as a trusted partner for businesses seeking high-quality equipment solutions. Their extensive product range includes both new and pre-owned machinery, catering to various industrial sectors. Whether you're looking to purchase, repair, or rent equipment, RICOMAQ 2004, S.L. offers comprehensive services to meet your needs. The company's commitment to customer satisfaction is evident through their personalized approach, ensuring that each client receives tailored solutions that align with their specific requirements. By choosing RICOMAQ 2004, S.L., businesses gain access to a reliable partner dedicated to enhancing operational efficiency and driving success.
Едностранна машина за кантиране IDM LEVEL KS
Jednostranná olepovačka hran IDM LEVEL KS
IDM LEVEL KS Enkeltsidet kantlimer
IDM LEVEL KS Einseitige Kantenanleimmaschine
Μονής όψης μπορντούρα IDM LEVEL KS
IDM LEVEL KS Single sided edgebander
Chapadora de cantos unilateral IDM LEVEL KS
Plaqueuse de chants simple face IDM LEVEL KS
Jednostrana rubna traka IDM LEVEL KS
IDM LEVEL KS Egyoldalas élzárógép
Bordatrice monolaterale IDM LEVEL KS
IDM LEVEL KS Vienpusis briaunų šlifavimas
IDM LEVEL KS Enkelzijdige kantenbewerker
Jednostronna okleiniarka krawędzi IDM LEVEL KS
Orladora de uma face IDM LEVEL KS
Bandă de cant cu o singură față IDM LEVEL KS
IDM LEVEL KS Односторонняя кромкооблицовочная машина
Jednostrana mašina za kačenje ivica IDM LEVEL KS
IDM LEVEL KS Enkelsidig kantlistmaskin
Tek taraflı kenar bantlama makinesi IDM LEVEL KS
EN
- Languages
English (GB)