Hydrotec Maschinenbau FSTA2-50 Transfer Press / Extrusion Press
|Power in tons||50 T|
|Table length||1100.0 mm|
|Table width||400.0 mm|
|Ram stroke||120.0 mm|
|Nbr of strokes/min||120.0|
|Distance between columns||1140.0 mm|
|Motor power||30.0 kW|
|Length x width x height||- × - × -|
|Hours under power|
|State||in working conditions|
|At local norms||yes|
Transfer Press / Extrusion Press together as a complete plant on Sale with stock no. 0700910 .
The transfer takes place via several mechanical cam disks.
- belt feed (zig-zag); belt thickness from 0,5 - 1,5 mm; belt width max. 200 mm; feed length 0,1 - 999 mm;
- coil - inner coil diameter 480 - 520 mm; outer coil diameter max. 1400 mm
further technical data:
- max. tool installation height: 350 - 430mm
- overload safety device (hydraulic)
With this plant, cigarets lighter inserts for cars have been manufactured.
- punching capacity: 500 kN
- cutting capacity: 9.0 t
- ram stroke - fixed: 170 (fixed) mm
- ram strokes per min.: 20 - 120
- plunger setting: 80 mm
- distance between columns: 1140 mm
- table surface: L x W 1100 x 400 mm
- stamp area: L x W 1100 x 400 mm
- passage opening in the table: 950 x 100 mm
- table height above ground: 1100 mm
- column way side: 315 mm
Please note that this description may have been translated automatically. Contact us for further information.