Price on request
Make an offer| Capacity | 1 T |
| Ram stroke | 800 mm |
| Type | |
| Nbr of strokes/min | |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 4380.0 × - × 3750.0 |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This forging hammer, manufactured by Huta Zygmunt in Poland, model MPM3150, is designed for industrial forging applications with a capacity of 1 ton. The hammer features a maximum ram stroke of 800 mm, enabling substantial material deformation. The total height of the machine is 4380 mm, with a height above the floor of 3750 mm, suitable for integration into various workshop environments.
The hammer delivers an energy blow of 3600 kg·m, driven by a falling ram weighing 1250 kg. The stroke rate is 110 strokes per minute, facilitating efficient forging cycles. The distance between the slide is 550 mm, with die steam lengths of 500 mm in the tup and 700 mm in the cushion. The minimum height of the die, excluding dovetail, is 220 mm, and the maximum weight of the upper die is 400 kg.
The system operates with steam or incoming air pressure ranging from 5 to 7 kg/cm², with average consumptions of 650 kg/h for steam and 12 m³/min for air. The anvil weighs approximately 24 tons, contributing to the hammer's stability, while the total weight of the hammer is around 35 tons.
The machine's frame is painted green with clear 'HUTA ZYGMUNT' and 'HQZ' markings in yellow paint, indicating its origin and model. The forging hammer includes multiple mechanical levers, bolts, and hydraulic or pneumatic lines visible on the frame, supporting its operation. The ram and piston components are large and polished, suggesting attention to key mechanical parts.
The condition of the hammer varies across components; some parts appear clean and freshly painted with minor signs of wear, while others show heavier use with grime, surface wear, and residue build-up typical of industrial environments. Pipes and hydraulic components show signs of chipped paint and usage but remain intact. Overall, the hammer presents a robust industrial machine suitable for forging tasks, with visible signs of operational use but maintained structural integrity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Forging Equipment
Capacity : 1 ton,
Energy of blow : 3600 kg.m,
Weight of falling ram : 1250 Kg,
Max. stroke : 800 mm,
Stroke rate : 110 spm,
Distance between slide: 550 mm,
Length of die steam in the tup : 500 mm,
Length of die steam in the cushion : 700 mm,
Min. height of the die (without dovetail) : 220 mm,
Max. weight of upper die : 400 Kg,
Steam or incoming air pressure : 5-7 Kg/cm2,
Average steam consumption: 650 kg/h,
Average air consumption : 12 m3/mm,
Height above the floor : 3750 mm,
Total height : 4380 mm,
Weight of anvil : 24 tons,
Total weight of the hammer : 35 tons.
Item Condition: Good condition
Capacity Tons: 1
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Forging Equipment
Capacity : 1 ton,
Energy of blow : 3600 kg.m,
Weight of falling ram : 1250 Kg,
Max. stroke : 800 mm,
Stroke rate : 110 spm,
Distance between slide: 550 mm,
Length of die steam in the tup : 500 mm,
Length of die steam in the cushion : 700 mm,
Min. height of the die (without dovetail) : 220 mm,
Max. weight of upper die : 400 Kg,
Steam or incoming air pressure : 5-7 Kg/cm2,
Average steam consumption: 650 kg/h,
Average air consumption : 12 m3/mm,
Height above the floor : 3750 mm,
Total height : 4380 mm,
Weight of anvil : 24 tons,
Total weight of the hammer : 35 tons.
Item Condition: Good condition
Capacity Tons: 1
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Capacity | 1 T |
| Ram stroke | 800 mm |
| Type | |
| Nbr of strokes/min | |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 4380.0 × - × 3750.0 |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This forging hammer, manufactured by Huta Zygmunt in Poland, model MPM3150, is designed for industrial forging applications with a capacity of 1 ton. The hammer features a maximum ram stroke of 800 mm, enabling substantial material deformation. The total height of the machine is 4380 mm, with a height above the floor of 3750 mm, suitable for integration into various workshop environments.
The hammer delivers an energy blow of 3600 kg·m, driven by a falling ram weighing 1250 kg. The stroke rate is 110 strokes per minute, facilitating efficient forging cycles. The distance between the slide is 550 mm, with die steam lengths of 500 mm in the tup and 700 mm in the cushion. The minimum height of the die, excluding dovetail, is 220 mm, and the maximum weight of the upper die is 400 kg.
The system operates with steam or incoming air pressure ranging from 5 to 7 kg/cm², with average consumptions of 650 kg/h for steam and 12 m³/min for air. The anvil weighs approximately 24 tons, contributing to the hammer's stability, while the total weight of the hammer is around 35 tons.
The machine's frame is painted green with clear 'HUTA ZYGMUNT' and 'HQZ' markings in yellow paint, indicating its origin and model. The forging hammer includes multiple mechanical levers, bolts, and hydraulic or pneumatic lines visible on the frame, supporting its operation. The ram and piston components are large and polished, suggesting attention to key mechanical parts.
The condition of the hammer varies across components; some parts appear clean and freshly painted with minor signs of wear, while others show heavier use with grime, surface wear, and residue build-up typical of industrial environments. Pipes and hydraulic components show signs of chipped paint and usage but remain intact. Overall, the hammer presents a robust industrial machine suitable for forging tasks, with visible signs of operational use but maintained structural integrity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Ковашки чук Huta Zygmunt, Polish MPM3150
Kovací buchar Huta Zygmunt, Polish MPM3150
Huta Zygmunt, Polish MPM3150 Smedehammer
Huta Zygmunt, Polish MPM3150 Schmiedehammer
Σφυρί σφυρηλάτησης Huta Zygmunt, Polish MPM3150
Huta Zygmunt, Polish MPM3150 Forging hammer
Martillo pilón Huta Zygmunt, Polish MPM3150
Marteau-pilon Huta Zygmunt, Polish MPM3150
Kovački čekić Huta Zygmunt, Polish MPM3150
Huta Zygmunt, Polish MPM3150 Kovácskalapács
Maglio Huta Zygmunt, Polish MPM3150
Huta Zygmunt, Polish MPM3150 Kalimo kūjis
Huta Zygmunt, Polish MPM3150 Smeedhamer
Młot kuźniczy Huta Zygmunt, Polish MPM3150
Martelo de forja Huta Zygmunt, Polish MPM3150
Ciocan de forjare Huta Zygmunt, Polish MPM3150
Huta Zygmunt, Polish MPM3150 Кузнечный молот
Kovački čekić Huta Zygmunt, Polish MPM3150
Huta Zygmunt, Polish MPM3150 Smideshammare
Dövme şahmerdanı Huta Zygmunt, Polish MPM3150
EN
- Languages
English (GB)