Price on request
Make an offer| Capacity | 6 T |
| Ram stroke | 1000 mm |
| Type | |
| Nbr of strokes/min | |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 4080.0 × 2400.0 × 7580.0 |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This listing features a forging hammer manufactured by Huta Zygmunt, a Polish company, model MPM16000B, produced in 2024. The hammer has a capacity of 6 tons with an energy of blow rated at 175 kJ. It offers a maximum ram stroke of 1000 mm and operates at a stroke rate of 80 strokes per minute. The machine includes a ram weight of 6.3 tons and a cylinder bore diameter of 850 mm. The minimum die thickness supported is 400 mm, with die seat lengths of 900 mm in the ram and 1250 mm in the die holder. The upper die can weigh up to 1.8 tons. The anvil weighs 120 tons, contributing to a total combined weight of 168 tons with the anvil. The hammer's dimensions are approximately 4080 mm in length, 2400 mm in width, and 7580 mm in height, with a light clearance between guides of 850 mm.
The machine frame is equipped with four large coil springs positioned around the ram, and linkage rods and mechanical components are attached to the frame sides, supporting the hammer's operation. Two large cylinders are mounted on the upper rear side of the hammer, likely hydraulic or pneumatic. The hammer features a yellow impact block on the ram.
Regarding condition, the forging hammer shows signs of wear including chipped and scratched surface paint, with some areas exhibiting surface rust. The base area has accumulated dirt and debris, including possible wood shavings. Despite these signs of use, the machine exterior remains structurally intact.
Additional equipment listed includes a trimming press with a 500-ton capacity, compressors rated at 250 kW, 110 kW, and 75 kW, large storage tanks totaling 56,000 liters, an IBH 800 kW model from 2023 with multiple coil sets, a transformer with an inbuilt 1000 kVA servo, and a VCB panel. This comprehensive setup supports a variety of forging and industrial applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Forging Equipment
1) Forging Hammer
(Brand new imported piston installed in December 2024)
Make : Huta Zygmunt, Polish
Model : MPM16000B
Capacity : 6 tons,
Energy of blow : 175 kJ,
Max. Stroke : 1000 mm,
Stroke per min : 80
Min. die thickness : 400 mm,
Ram weight : 6.3 tons,
Length of die seat in the ram : 900 mm,
Length of die seat in the die holder : 1250 mm,
Upper die max. weight : 1.8 tons,
Cylinder bore : 850 mm,
Anvil weight : 120 tons,
Total weight with anvil : 168 tons,
Width : 4080 mm,
Height : 7580 mm,
Depth : 2400 mm,
Light between guides : 850 mm.
2. Trimming press 500 ton
Double crank (4*3 foot bed)
3. Compressor 250 KW
4. Compressor 110 KW
5. Compressor 75 KW
6. Tank 26000 litres + 15000 litres + 15000 litres
7. IBH 800 Kw 2023 model (with 3 coil set 125 rcs , 160 rcs, 200 rcs )
8. Transformer with inbuilt servo 1000 kva
9. Vcb panel
Item Condition: Good working condition
Capacity Tons: 6
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 14, 2026 |
Forging Equipment
1) Forging Hammer
(Brand new imported piston installed in December 2024)
Make : Huta Zygmunt, Polish
Model : MPM16000B
Capacity : 6 tons,
Energy of blow : 175 kJ,
Max. Stroke : 1000 mm,
Stroke per min : 80
Min. die thickness : 400 mm,
Ram weight : 6.3 tons,
Length of die seat in the ram : 900 mm,
Length of die seat in the die holder : 1250 mm,
Upper die max. weight : 1.8 tons,
Cylinder bore : 850 mm,
Anvil weight : 120 tons,
Total weight with anvil : 168 tons,
Width : 4080 mm,
Height : 7580 mm,
Depth : 2400 mm,
Light between guides : 850 mm.
2. Trimming press 500 ton
Double crank (4*3 foot bed)
3. Compressor 250 KW
4. Compressor 110 KW
5. Compressor 75 KW
6. Tank 26000 litres + 15000 litres + 15000 litres
7. IBH 800 Kw 2023 model (with 3 coil set 125 rcs , 160 rcs, 200 rcs )
8. Transformer with inbuilt servo 1000 kva
9. Vcb panel
Item Condition: Good working condition
Capacity Tons: 6
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Capacity | 6 T |
| Ram stroke | 1000 mm |
| Type | |
| Nbr of strokes/min | |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 4080.0 × 2400.0 × 7580.0 |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This listing features a forging hammer manufactured by Huta Zygmunt, a Polish company, model MPM16000B, produced in 2024. The hammer has a capacity of 6 tons with an energy of blow rated at 175 kJ. It offers a maximum ram stroke of 1000 mm and operates at a stroke rate of 80 strokes per minute. The machine includes a ram weight of 6.3 tons and a cylinder bore diameter of 850 mm. The minimum die thickness supported is 400 mm, with die seat lengths of 900 mm in the ram and 1250 mm in the die holder. The upper die can weigh up to 1.8 tons. The anvil weighs 120 tons, contributing to a total combined weight of 168 tons with the anvil. The hammer's dimensions are approximately 4080 mm in length, 2400 mm in width, and 7580 mm in height, with a light clearance between guides of 850 mm.
The machine frame is equipped with four large coil springs positioned around the ram, and linkage rods and mechanical components are attached to the frame sides, supporting the hammer's operation. Two large cylinders are mounted on the upper rear side of the hammer, likely hydraulic or pneumatic. The hammer features a yellow impact block on the ram.
Regarding condition, the forging hammer shows signs of wear including chipped and scratched surface paint, with some areas exhibiting surface rust. The base area has accumulated dirt and debris, including possible wood shavings. Despite these signs of use, the machine exterior remains structurally intact.
Additional equipment listed includes a trimming press with a 500-ton capacity, compressors rated at 250 kW, 110 kW, and 75 kW, large storage tanks totaling 56,000 liters, an IBH 800 kW model from 2023 with multiple coil sets, a transformer with an inbuilt 1000 kVA servo, and a VCB panel. This comprehensive setup supports a variety of forging and industrial applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 14, 2026 |
Ковашки чук Huta Zygmunt, Polish MPM16000B
Kovací buchar Huta Zygmunt, Polish MPM16000B
Huta Zygmunt, Polish MPM16000B Smedehammer
Huta Zygmunt, Polish MPM16000B Schmiedehammer
Σφυρί σφυρηλάτησης Huta Zygmunt, Polish MPM16000B
Huta Zygmunt, Polish MPM16000B Forging hammer
Martillo pilón Huta Zygmunt, Polish MPM16000B
Marteau-pilon Huta Zygmunt, Polish MPM16000B
Kovački čekić Huta Zygmunt, Polish MPM16000B
Huta Zygmunt, Polish MPM16000B Kovácskalapács
Maglio Huta Zygmunt, Polish MPM16000B
Huta Zygmunt, Polish MPM16000B Kalimo kūjis
Huta Zygmunt, Polish MPM16000B Smeedhamer
Młot kuźniczy Huta Zygmunt, Polish MPM16000B
Martelo de forja Huta Zygmunt, Polish MPM16000B
Ciocan de forjare Huta Zygmunt, Polish MPM16000B
Huta Zygmunt, Polish MPM16000B Кузнечный молот
Kovački čekić Huta Zygmunt, Polish MPM16000B
Huta Zygmunt, Polish MPM16000B Smideshammare
Dövme şahmerdanı Huta Zygmunt, Polish MPM16000B
EN
- Languages
English (GB)