Price on request
Make an offer| Capacity | T |
| Ram stroke | 900 mm |
| Type | |
| Nbr of strokes/min | |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 3620.0 × 2100.0 × 5930.0 |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 11/04/2026 |
This forging hammer, model MPM10000B, is manufactured by Huta Zygmunt, a Polish company. It features a maximum ram stroke of 900 mm and a forging capacity of 3.5 tons. The hammer delivers an energy blow of 110 kJ, with a falling part weight of 3850 kg and a maximum upper die weight of 1100 kg. The anvil block weighs approximately 75 tons without the die holder, and the combined weight of the hammer and anvil block is about 103 tons. The approximate forging weight ranges between 5 and 18 kg. Operational parameters include an incoming air steam pressure between 0.5 and 0.7 MPa, with average steam consumption at 1200 kg/h, cold air consumption at 28 m³/min, and hot air consumption at 22 m³/min. The hammer operates at around 90 blows per minute.
The overall dimensions of the hammer are 3620 mm in length, 2100 mm in width, and 5930 mm in total height, with the hammer height above the floor at 4700 mm. Additional dimensional details include a minimum die partition height of 780 mm, a minimum die height of 350 mm (without tail), guideway spacing of 704 mm, die seat length of 750 mm, die holder seat length of 1050 mm, and a maximum working area width of 750 mm. The total weight of the hammer, including spare parts, is approximately 105 tons, with the anvil weighing around 70 tons.
The hammer is equipped with a central vertical ram featuring a polished metal surface, and the base includes an anvil block showing wear marks consistent with industrial use. The body is painted green and gray, exhibiting signs of wear such as paint chipping and surface wear typical for used industrial machinery. Four large bolts with springs are present on each side of the hammer body, and several cables or hoses are attached to the left and right sides. Accessories observed near the base include metal rods, a metal bucket, and various tools. The surrounding floor area shows signs of industrial use and debris. Two spare rams are available at an extra cost.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Forging Equipment
Capacity : 3.5 tons
Max. stroke : 900 mm,
Energy of blow : 110 kJ,
Weight of falling part : 3850 kgs,
Max weight of upper die : 1100 kgs,
Anvil block weight w/o die holder : 75 tons,
Weight of hammer with anvil block : 103 tons,
Approximate forging weight : 5-18 kg,
Steam of incoming air pressure : 0.5-0.7 MPa,
Average Steam consumption : 1200 kg/h,
Average cold air consumption : 28 m3/min,
Average hot air consumption : 22 m3/min,
Number of blows per minute : 90 / pm,
Overall dimension :
Length of hammer : 3620 mm,
Width of hammer : 2100 mm,
Total height of hammer : 5930 mm,
Height of hammer above floor : 4700 mm,
Min height of die partition above : 780 mm,
Min height of the die (without tail) : 350 mm,
Guideway spacing : 704 mm,
Length of die seat : 750 mm,
Length of the seat in the die holder : 1050 mm,
Max width of working area : 750 mm,
Max tup stroke : 900 mm,
The total weight of the hammer, including the spare parts is about : 105 ton,
The weight of the Anvil : 70 tons.
2 Spare Rams available at extra cost.
Item Condition: Good working condition
Capacity Tons: 3.5
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 11, 2026 |
Forging Equipment
Capacity : 3.5 tons
Max. stroke : 900 mm,
Energy of blow : 110 kJ,
Weight of falling part : 3850 kgs,
Max weight of upper die : 1100 kgs,
Anvil block weight w/o die holder : 75 tons,
Weight of hammer with anvil block : 103 tons,
Approximate forging weight : 5-18 kg,
Steam of incoming air pressure : 0.5-0.7 MPa,
Average Steam consumption : 1200 kg/h,
Average cold air consumption : 28 m3/min,
Average hot air consumption : 22 m3/min,
Number of blows per minute : 90 / pm,
Overall dimension :
Length of hammer : 3620 mm,
Width of hammer : 2100 mm,
Total height of hammer : 5930 mm,
Height of hammer above floor : 4700 mm,
Min height of die partition above : 780 mm,
Min height of the die (without tail) : 350 mm,
Guideway spacing : 704 mm,
Length of die seat : 750 mm,
Length of the seat in the die holder : 1050 mm,
Max width of working area : 750 mm,
Max tup stroke : 900 mm,
The total weight of the hammer, including the spare parts is about : 105 ton,
The weight of the Anvil : 70 tons.
2 Spare Rams available at extra cost.
Item Condition: Good working condition
Capacity Tons: 3.5
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Capacity | T |
| Ram stroke | 900 mm |
| Type | |
| Nbr of strokes/min | |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 3620.0 × 2100.0 × 5930.0 |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 11/04/2026 |
This forging hammer, model MPM10000B, is manufactured by Huta Zygmunt, a Polish company. It features a maximum ram stroke of 900 mm and a forging capacity of 3.5 tons. The hammer delivers an energy blow of 110 kJ, with a falling part weight of 3850 kg and a maximum upper die weight of 1100 kg. The anvil block weighs approximately 75 tons without the die holder, and the combined weight of the hammer and anvil block is about 103 tons. The approximate forging weight ranges between 5 and 18 kg. Operational parameters include an incoming air steam pressure between 0.5 and 0.7 MPa, with average steam consumption at 1200 kg/h, cold air consumption at 28 m³/min, and hot air consumption at 22 m³/min. The hammer operates at around 90 blows per minute.
The overall dimensions of the hammer are 3620 mm in length, 2100 mm in width, and 5930 mm in total height, with the hammer height above the floor at 4700 mm. Additional dimensional details include a minimum die partition height of 780 mm, a minimum die height of 350 mm (without tail), guideway spacing of 704 mm, die seat length of 750 mm, die holder seat length of 1050 mm, and a maximum working area width of 750 mm. The total weight of the hammer, including spare parts, is approximately 105 tons, with the anvil weighing around 70 tons.
The hammer is equipped with a central vertical ram featuring a polished metal surface, and the base includes an anvil block showing wear marks consistent with industrial use. The body is painted green and gray, exhibiting signs of wear such as paint chipping and surface wear typical for used industrial machinery. Four large bolts with springs are present on each side of the hammer body, and several cables or hoses are attached to the left and right sides. Accessories observed near the base include metal rods, a metal bucket, and various tools. The surrounding floor area shows signs of industrial use and debris. Two spare rams are available at an extra cost.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 11, 2026 |
Ковашки чук Huta Zygmunt, Polish MPM10000B
Kovací buchar Huta Zygmunt, Polish MPM10000B
Huta Zygmunt, Polish MPM10000B Smedehammer
Huta Zygmunt, Polish MPM10000B Schmiedehammer
Σφυρί σφυρηλάτησης Huta Zygmunt, Polish MPM10000B
Huta Zygmunt, Polish MPM10000B Forging hammer
Martillo pilón Huta Zygmunt, Polish MPM10000B
Marteau-pilon Huta Zygmunt, Polish MPM10000B
Kovački čekić Huta Zygmunt, Polish MPM10000B
Huta Zygmunt, Polish MPM10000B Kovácskalapács
Maglio Huta Zygmunt, Polish MPM10000B
Huta Zygmunt, Polish MPM10000B Kalimo kūjis
Huta Zygmunt, Polish MPM10000B Smeedhamer
Młot kuźniczy Huta Zygmunt, Polish MPM10000B
Martelo de forja Huta Zygmunt, Polish MPM10000B
Ciocan de forjare Huta Zygmunt, Polish MPM10000B
Huta Zygmunt, Polish MPM10000B Кузнечный молот
Kovački čekić Huta Zygmunt, Polish MPM10000B
Huta Zygmunt, Polish MPM10000B Smideshammare
Dövme şahmerdanı Huta Zygmunt, Polish MPM10000B
EN
- Languages
English (GB)