This HURCO VMX 50/40T Vertical Machining Centre was manufactured in 2005 in Taiwan. It comes with a 10,000 rpm spindle (SK40 tool taper), 3 axes (X = 1270 mm / Y = 660 mm / Z = 610 mm) and automatic tool changer with 24 slots. In addition the scope of delivery includes a chip conveyor, an oil mist separator system (ME-FI from W+W), a high-pressure cooling system for coolant supply through the spindle, an integrated hydraulic tool clamping system and the feature of workpiece position detection and tool length calibration with probe. In total it has operated 44,358 hours and is still under production.

As extra option upon request and for additional charge the machine can be equipped with a KITAGAWA TT 251 Tilting NC Rotary Table for 5-axis simultaneous operations (4th axis NC rotation axis, 5th axis tilting of the positioning axis in conjunction with the plain text software & 5-axis simultaneous in conjunction with the ISO code software and corresponding programming station). Contact us at any time for further details!

Machine width: 4800 mm
Machine depth: 4560 mm
Machine height: 2950 mm
Machine weight: 9400 kg
CNC: HURCO ULTIMAX 4
Spindle speed range: 10000 rpm
Tool taper: SK 40
Number of axis: 3 (option for 5)
X-Axis Movement: 1270
Y-Axis Movement: 660
Z-Axis Movement: 610
Oil water separator: Yes
Chip conveyor: Yes
Internal cooling: Yes
[UPON REQUEST for additional charge] KITAGAWA TT 251 (4th axis NC rotation axis, 5th axis tilting of the positioning axis in conjunction with the plain text software)
Chip Conveyor // ME-FI 1000 Oil mist separator from W+W (YOM 2014)
Coolant system
Chip splash guard cabin
Flushing system to support chip removal
Coolant filtration via pump suction filter
Signal light for machine operating status
Machine light
Set of machine shoes
Removable electronic handwheel

[upon request for additional charge] 4th axis nc rotation axis, 5th axis tilting of the positioning axis in conjunction with the plain text software
[upon request for additional charge] 5-axis simultaneous in conjunction with the iso code software and corresponding programming station (kitagawa tt 251)
Pocket milling with islands
Synchronous thread cutting (thread cutting without compensating chuck)
Face plate diameter 250 mm
Center height 225 mm
Spindle passage 70 mm
High-pressure cooling system for coolant supply through the spindle (cooling lubricant type emulsion, coolant pressure 20 bar)
Integrated hydraulic tool clamping system
Workpiece position detection and tool length calibration with probeMachine manual on CD // 2 monochrome screens (text + graphics) // 2 software units (1 x plain text dialog programming on the machine + 1 x for ISO code programming by external programming device or CAD/CAM system via RS-232 C or V 24 interface) Pentium technology, 1.6 GB hard disk, 64 MB RAM, parallel and serial data interfaces, DOS-compatible 3.5" 1.44 MB drive // System-internal self-diagnosis, DOS directory structure, software version 2.xx

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Axis X 1270 mm
Axis Y 660 mm
Axis Z 610 mm
Rotary table (4th axis) no
Type of CNC HURCO ULTIMAX 4
Table length 1500 mm
Table width 660 mm
Max. part weight  kg
Number of tool pockets 24
Spindle taper SK 40
Max. spindle speed 10000 rpm
Spindle motor power 18 kW
-------------------
Length x width x height 4800.0 × 4560.0 × 2950.0
Weight 9400 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Hurco VMX 50/40T
Client type Reseller
Active since 2019
Offers online 941
Last activity March 28, 2024

Description

This HURCO VMX 50/40T Vertical Machining Centre was manufactured in 2005 in Taiwan. It comes with a 10,000 rpm spindle (SK40 tool taper), 3 axes (X = 1270 mm / Y = 660 mm / Z = 610 mm) and automatic tool changer with 24 slots. In addition the scope of delivery includes a chip conveyor, an oil mist separator system (ME-FI from W+W), a high-pressure cooling system for coolant supply through the spindle, an integrated hydraulic tool clamping system and the feature of workpiece position detection and tool length calibration with probe. In total it has operated 44,358 hours and is still under production.

As extra option upon request and for additional charge the machine can be equipped with a KITAGAWA TT 251 Tilting NC Rotary Table for 5-axis simultaneous operations (4th axis NC rotation axis, 5th axis tilting of the positioning axis in conjunction with the plain text software & 5-axis simultaneous in conjunction with the ISO code software and corresponding programming station). Contact us at any time for further details!

Machine width: 4800 mm
Machine depth: 4560 mm
Machine height: 2950 mm
Machine weight: 9400 kg
CNC: HURCO ULTIMAX 4
Spindle speed range: 10000 rpm
Tool taper: SK 40
Number of axis: 3 (option for 5)
X-Axis Movement: 1270
Y-Axis Movement: 660
Z-Axis Movement: 610
Oil water separator: Yes
Chip conveyor: Yes
Internal cooling: Yes
[UPON REQUEST for additional charge] KITAGAWA TT 251 (4th axis NC rotation axis, 5th axis tilting of the positioning axis in conjunction with the plain text software)
Chip Conveyor // ME-FI 1000 Oil mist separator from W+W (YOM 2014)
Coolant system
Chip splash guard cabin
Flushing system to support chip removal
Coolant filtration via pump suction filter
Signal light for machine operating status
Machine light
Set of machine shoes
Removable electronic handwheel

[upon request for additional charge] 4th axis nc rotation axis, 5th axis tilting of the positioning axis in conjunction with the plain text software
[upon request for additional charge] 5-axis simultaneous in conjunction with the iso code software and corresponding programming station (kitagawa tt 251)
Pocket milling with islands
Synchronous thread cutting (thread cutting without compensating chuck)
Face plate diameter 250 mm
Center height 225 mm
Spindle passage 70 mm
High-pressure cooling system for coolant supply through the spindle (cooling lubricant type emulsion, coolant pressure 20 bar)
Integrated hydraulic tool clamping system
Workpiece position detection and tool length calibration with probeMachine manual on CD // 2 monochrome screens (text + graphics) // 2 software units (1 x plain text dialog programming on the machine + 1 x for ISO code programming by external programming device or CAD/CAM system via RS-232 C or V 24 interface) Pentium technology, 1.6 GB hard disk, 64 MB RAM, parallel and serial data interfaces, DOS-compatible 3.5" 1.44 MB drive // System-internal self-diagnosis, DOS directory structure, software version 2.xx

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Axis X 1270 mm
Axis Y 660 mm
Axis Z 610 mm
Rotary table (4th axis) no
Type of CNC HURCO ULTIMAX 4
Table length 1500 mm
Table width 660 mm
Max. part weight  kg
Number of tool pockets 24
Spindle taper SK 40
Max. spindle speed 10000 rpm
Spindle motor power 18 kW
-------------------
Length x width x height 4800.0 × 4560.0 × 2950.0
Weight 9400 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 941
Last activity March 28, 2024

Here is a selection of similar machines

Hurco VMX 50/40T Machining center - vertical