Price on request
Make an offer| Clamping force | 50 T |
| Screw diameter | mm |
| Tie bar spacing (H) | mm |
| Tie bar spacing (V) | mm |
| Shot volume | cm³ |
| Shot weight | g |
| Pressure on material | 1700 bar |
| Platen length | mm |
| Platen width | mm |
| Bi-metal screw | |
| Equipped with robot | |
| Robot interface | |
| Number of cores | |
| Number of heating zones | |
| Opening of the press | mm |
| Mould size | |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | HP 50 |
| Last availability date | 27/04/2026 |
This HP 50 injection molding machine, manufactured in 1997, features a clamping unit with a clamping force of 50 tons (500 kN). The machine is designed to handle injection molding processes requiring a material pressure of up to 1700 bar. The injection unit specifications include a screw diameter of 28 mm and a calculated injection volume of 50 cm³, suitable for producing small to medium-sized molded parts.
The clamping unit offers a platen size of 500 x 500 mm and a column clearance of 320 x 320 mm, which provides flexibility for various mold sizes. The opening stroke of the clamping unit is 250 mm, with a minimum mold thickness of 150 mm, allowing for a range of mold configurations.
The machine is equipped with a control panel located on the yellow section of the unit, featuring buttons and a display for operational control. Below the control panel, there is a metal chute designed for part ejection, facilitating efficient removal of molded components.
The machine's exterior panels are white and yellow, reflecting its industrial design. A visible notice on the machine advises operators to separate the first five injections after each restart into a red bin for quality control purposes.
While specific details such as screw speed, heating zones, hydraulic motor power, and total installed power are not provided, the machine's robust clamping force and injection pressure capabilities make it suitable for various injection molding applications. Dimensions, weight, and oil capacity are not specified.
This injection molding machine is a solid option for manufacturers seeking reliable equipment with a 50-ton clamping force and precise injection pressure control. No information is available regarding additional accessories, robot integration, or operational hours.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Injection Unit
Screw diameter: 28 mm
Calculated injection volume: 50 cm³
Length-to-diameter ratio: L/D
Maximum injection flow rate: cm³/s
Material pressure: 1700 bar
PS plasticizing capacity:
Screw speed: RPM
Hydraulic motor torque: Nm
Hydraulic motor power: HP
Number of temperature zones: N
Clamping unit
Clamping force: 500 kN
Opening stroke: 250 mm
Min. mold thickness: 150 mm
Max. distance between platen: mm
Column clearance: 320 x 320 mm
Platen dimensions: 500 x 500 mm
General
Heating power: kW
Total installed power: kW
Oil capacity: L
Dimensions: m
Weight: kg
Other
Equipment:
Commissioned: 1997
Hours of operation: h
Tonnage: 50
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 84 |
| Last activity | May 8, 2026 |
Injection Unit
Screw diameter: 28 mm
Calculated injection volume: 50 cm³
Length-to-diameter ratio: L/D
Maximum injection flow rate: cm³/s
Material pressure: 1700 bar
PS plasticizing capacity:
Screw speed: RPM
Hydraulic motor torque: Nm
Hydraulic motor power: HP
Number of temperature zones: N
Clamping unit
Clamping force: 500 kN
Opening stroke: 250 mm
Min. mold thickness: 150 mm
Max. distance between platen: mm
Column clearance: 320 x 320 mm
Platen dimensions: 500 x 500 mm
General
Heating power: kW
Total installed power: kW
Oil capacity: L
Dimensions: m
Weight: kg
Other
Equipment:
Commissioned: 1997
Hours of operation: h
Tonnage: 50
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Clamping force | 50 T |
| Screw diameter | mm |
| Tie bar spacing (H) | mm |
| Tie bar spacing (V) | mm |
| Shot volume | cm³ |
| Shot weight | g |
| Pressure on material | 1700 bar |
| Platen length | mm |
| Platen width | mm |
| Bi-metal screw | |
| Equipped with robot | |
| Robot interface | |
| Number of cores | |
| Number of heating zones | |
| Opening of the press | mm |
| Mould size | |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | HP 50 |
| Last availability date | 27/04/2026 |
This HP 50 injection molding machine, manufactured in 1997, features a clamping unit with a clamping force of 50 tons (500 kN). The machine is designed to handle injection molding processes requiring a material pressure of up to 1700 bar. The injection unit specifications include a screw diameter of 28 mm and a calculated injection volume of 50 cm³, suitable for producing small to medium-sized molded parts.
The clamping unit offers a platen size of 500 x 500 mm and a column clearance of 320 x 320 mm, which provides flexibility for various mold sizes. The opening stroke of the clamping unit is 250 mm, with a minimum mold thickness of 150 mm, allowing for a range of mold configurations.
The machine is equipped with a control panel located on the yellow section of the unit, featuring buttons and a display for operational control. Below the control panel, there is a metal chute designed for part ejection, facilitating efficient removal of molded components.
The machine's exterior panels are white and yellow, reflecting its industrial design. A visible notice on the machine advises operators to separate the first five injections after each restart into a red bin for quality control purposes.
While specific details such as screw speed, heating zones, hydraulic motor power, and total installed power are not provided, the machine's robust clamping force and injection pressure capabilities make it suitable for various injection molding applications. Dimensions, weight, and oil capacity are not specified.
This injection molding machine is a solid option for manufacturers seeking reliable equipment with a 50-ton clamping force and precise injection pressure control. No information is available regarding additional accessories, robot integration, or operational hours.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 84 |
| Last activity | May 8, 2026 |
Шприцмашина HP 50
Vstřikovací lis HP 50
HP 50 Sprøjtestøbemaskine
HP 50 Spritzgießmaschine
Πρέσα έγχυσης HP 50
HP 50 Injection moulding machine
Inyectora HP 50
Presse à injecter HP 50
Stroj za injekcijsko prešanje HP 50
HP 50 Fröccsöntőgép
Pressa a iniezione HP 50
HP 50 Įpurškimo liejimo staklės
HP 50 Spuitgietmachine
Wtryskarka HP 50
Injetora HP 50
Mașină de injectat HP 50
HP 50 Термопластавтомат
Mašina za injekciono prešanje HP 50
HP 50 Formsprutningsmaskin
Enjeksiyon makinesi HP 50
EN
- Languages
English (GB)