Fully refurbished Hosokawa Alpine UPZ 315 used machine by Alpine Originals.

The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc.
This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products.
The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc.

Technical details
Made of stainless steel
Unit has stainless steel plate beater and screen fitted
Non Pressure Shock Resistant (NPSR), non gas tight
Scope of supply
Mill with 18,5kW motor and a set of grinding tools of choice

A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE machinery

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Worked hours
Hours under power
State rebuilt
At local norms ---------
Status dismantled
Client type Machinery manufacturer
Active since 2020
Offers online 34
Last activity March 28, 2024

Description

Fully refurbished Hosokawa Alpine UPZ 315 used machine by Alpine Originals.

The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc.
This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products.
The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc.

Technical details
Made of stainless steel
Unit has stainless steel plate beater and screen fitted
Non Pressure Shock Resistant (NPSR), non gas tight
Scope of supply
Mill with 18,5kW motor and a set of grinding tools of choice

A HOSOKAWA ALPINE Originals machine
Refurbished by the original manufacturer
Use of original components only
Original manufacturer warranty
Guaranteed manufacturer spare parts supply
Short lead time
Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs
Possibility to provide all additionally required peripherals or adapt to existing production plant
We are also interested in buying back disused HOSOKAWA ALPINE machinery

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Worked hours
Hours under power
State rebuilt
At local norms ---------
Status dismantled

About this seller

Client type Machinery manufacturer
Active since 2020
Offers online 34
Last activity March 28, 2024

Here is a selection of similar machines

Refurbished Hosokawa Alpine Ultraplex UPZ 315