Specifications

-------------------
Worked hours
Hours under power
State excellent
At local norms ---------
Status

Description

I am selling an unused pneumatic cutting semi-automatic HORNÝ.

We had the saw made to order by the company Horný for cutting aluminum tubes pr. 8 and 12 mm for the production of fishing forks.
The saw has a manual loading of the cut material - rods up to 6 m long (we cut 4 m tubes), after loading the material is cut to the set length using a pneumatic feeder, the movement of the blade into engagement is also fully automatic and pneumatically controlled.
The blade has a diameter of 160 mm, the cutter motor is electric.
The saw also has liquid cutting cooling with its own built-in hopper.
I estimate the weight of the saw at about 150-200 kg.

We cut only the two types of Al tubes, always about once every two months, in a shift we were able to make about 3500 cuts on it.
I do not know what is the maximum possible diameter of the cut material, 20 mm for sure, but it is probably possible for larger diameters within the possibilities of the blade ... The speed of the blade into engagement can also be continuously adjusted on the pneumatic control.

After the end of the production of fishing forks, the machine is shut down for about 6 years and unused. Unfortunately, we no longer have a compressor, so I can't demonstrate the pneumatic functions of the machine, only electric. So I could rent a compressor to try ...

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Client type User – small or medium company
Active since 2021
Offers online 1
Last activity June 16, 2024

Description

I am selling an unused pneumatic cutting semi-automatic HORNÝ.

We had the saw made to order by the company Horný for cutting aluminum tubes pr. 8 and 12 mm for the production of fishing forks.
The saw has a manual loading of the cut material - rods up to 6 m long (we cut 4 m tubes), after loading the material is cut to the set length using a pneumatic feeder, the movement of the blade into engagement is also fully automatic and pneumatically controlled.
The blade has a diameter of 160 mm, the cutter motor is electric.
The saw also has liquid cutting cooling with its own built-in hopper.
I estimate the weight of the saw at about 150-200 kg.

We cut only the two types of Al tubes, always about once every two months, in a shift we were able to make about 3500 cuts on it.
I do not know what is the maximum possible diameter of the cut material, 20 mm for sure, but it is probably possible for larger diameters within the possibilities of the blade ... The speed of the blade into engagement can also be continuously adjusted on the pneumatic control.

After the end of the production of fishing forks, the machine is shut down for about 6 years and unused. Unfortunately, we no longer have a compressor, so I can't demonstrate the pneumatic functions of the machine, only electric. So I could rent a compressor to try ...

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Worked hours
Hours under power
State excellent
At local norms ---------
Status

About this seller

Client type User – small or medium company
Active since 2021
Offers online 1
Last activity June 16, 2024

Here is a selection of similar machines

HORNÝ VS16xxx Slitting saw for metal