Single-sided edge banding machine
Brand: HOMAG
Type: PROFI KR 10/20/QA/S2
Year: 2001
incl. workpiece return ZHR05/R/115
Fixed fence side right
Basic machine:
- with continuous machine column and unit support, prepared for mounting the edge banding and finishing units
- Glue roller drive at feed stop
- Workpiece support with roller rail, extendable approx. 700 mm
Workpiece transport device:
- Rolling block link chain with ball bearings on running and guide surfaces
Top pressure:
- with driven compound V-belt
- motorised height adjustment
Electrical equipment:
- Operating voltage 400 volts, 50 Hz.
- Control voltage 230 volts, 50 Hz.
HOMATIC electronic control:
- Programmable logic controller (PLC)
NC21 control system:
Hardware:
- Industrial computer 68040 with 16 MByte RAM
- 1 PCMCIA hard disk 170 MByte
Software:
- Real-time operating system OS9 with Windows interface
Technical data:
- Feed infinitely variable 10 - 40 m/min.
- Workpiece projection 30 mm
- Workpiece thickness 12 - 45 mm
- Working height up to upper edge of chain 950 mm
- Working width min. 85 mm
- Pneumatic connection 7 - 8 bar
Release agent spraying unit top / bottom
Joining unit UF20
2 motors each 4 kW, 150 Hz., 9,000 1/min.
Gluing unit A3 - 48 rolls consisting of:
Hot-melt gluing unit A34
Magazine A3 - 48 rolls
- edge thickness 24x 0,3 - 3,0 mm
- edge thickness 24x 0,3 - 2,0 mm
- edge width 12 - 45 mm
- Roll diameter 24x 830 mm
- Roll diameter 24x 600 mm
Pressure zone C
- 1 driven prepress roll diam. 150 mm
- 6 post-pressing rollers diam. 70 mm
Workpiece preheating up to 45 mm workpiece thickness
Cross-cut unit HL 04 Chamfer / Straight
- 2 motors each 0,18 kW, 200 Hz., 12.000 1/min.
- Edge thickness straight max. 6 mm, chamfer max. 3 mm
- Edge width 65 mm
- Edge cross-section max. 270 mm²
Pre-milling unit top and bottom 0.55 kW
- 2 motors each 0.55 kW, 200 Hz., 12,000 1/min.
Shape trimming unit FK 13 8-position automatic
- 2 motors each 0,55 kW, 200 Hz., 12.000 1/min.
- automatic 8-fold tool changer
Standard milling unit Pneumatic control
- 1 milling motor 4,5 kW, 100 Hz., 6.000 1/min.
- swivel range 90 degrees
Multi fettling unit MN 21 automatic
- for max. 3 different profiles
Buffing unit top and bottom with oscillation
to make the edges smooth to the touch
- 2 motors 0.25 kW each
- Incline and height adjustable
- Height adjustment with top pressure
Workpiece dimensions
- Length min. 250 mm
- Length max. 2,500 mm
- with workpiece projection 40 mm
- Width min. 60 mm
- Width max. 1,000 mm
- with workpiece projection 40 mm
- Thickness min. 8 mm
- Thickness max. 40 mm
- with workpiece projection 40 mm
- Workpiece size min. 250 x 250 mm
- Workpiece size max. 1,000 x 2,500 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase