Manufacturer Homag Optimat
Model KL 78/A20/S2
Year 1999
Location Germany DE
Category Edgebanders - single sided
Product id P80612075

Contact the seller

12 buyers were interested in this machine last month

You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller

Client type Dealer
Active since 2010
Offers online 8
Last activity April 8, 2019


Board thickness60.0 mm
Edge thickness3.0 mm
Feed advance24 m/min
Sound-proof cabinYes
Glue tankYes
Length x width x height 9300.0 mm × 1400.0 mm × 1800.0 mm
Weight6000.0 kg
Worked hours
Hours under power
State good
At local norms yes
Status visible


Working width minimum: 55 mm with workpiece thickness 22 mm
100 mm with workpiece thickness 60 mm
Workpiece thickness 12-60 mm
Workpiece overhang 30 mm
Edge material strips 0,4 – 20 mm
Edge material roll 0,3 – 3 mm
Roll diameter max. 830 mm
Transport chain 80 mm wide with rubber pad
Workpiece support Scissors version with roller bearing, max. 1000mm extendable
Feed 18 – 24 m/min
Pre- installation for addition workpiece return system ZHR 05
Units :
Pre-Milling Unit (Vertical joint trimming) 2 x 3 kW; 150 Hz; 9000 rpm
for jointing trimming the workpiece edge before gluing
Electro-pneumatic control of the motor 1.Workpiece blowoff.
Workpiece preheating for heating the workpiece edge before the glue application
Gluing A 20:
consisting of
– Melt adhesive Unit QA34
on melting unit with granulate tank;
– Magazine
for solid edge strips goods and roll goods
Feeding the strip material through vacuum cups
Edge monitoring with automatic feed
Stop if there is no edge;
– Roles separator
– Pressure Zone C
1 driven roll press Ø 150 mm
6 after press roll Ø 70 mm
Pressure adjustment pneumatically
Centric Rail adjustment to different edge thickness
Gluing Unit PU 34 for selective processing of hot melt adhesive or PU
Snipping unit HL 83

chamfer / straight
2 x 0,5 kW; 200 Hz;12000 Upm;

Rough Trimming Unit Optimat 2 x 1,5 kW; 200 Hz;12000 Upm
Multi function Unit (Profile Trimming Unit) FK 13

2 x0,4 kW; 200 Hz;12000 Upm
Automatic 8-station tool changer to edit the edge overhang at the on the workpiece upper- and lower edge and the Milling around the workpiece front – and trailing edge in connection with end trimming and pre-milling unit

Universal Trimming Unit Optimat 1x4 kW,150 Hz, 9000 Upm,
Swiveling max. 90 degrees

Multi- Clening MN21 automatic for max. 3 different profiles
Wiping device glue joint Removal of adhesive residue in the region
the glue joint
Buffing Units 2x 0,25 kW; top / bottom with oscillation
Operating voltage 380/400 Volt; 50/60 Hz
Control voltage 24 Volt
Control – Software: HOMAG HOMATIC NC 21

Please note that this description may have been translated automatically. Contact us for further information.

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines


Contact the seller