Sorry, this offer is no longer available on Exapro

Homag Optimat KAL 310/8/A20/S2 edgebander

Here is a selection of similar machines

Single sided edge banding machine
Brand: Homag
Type: Optimat KAL 310/8/A20/S2
Year: 2007

Stop on the left hand side

Highest edge banding quality in series by the optional available Schugoma Kantenking or the use of PUR glue is also possible.

Technical data:
- Feed 18 m/min
- Working height 950 mm
- Working width min.:
55mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm
(depending on the workpiece length)
- Workpiece overhang 30 mm
- Workpiece thickness 12-60 mm
- Edge material coil 0,3-3 mm
- Edge cross sectional area max. at PVC 135 mm², at veneer 100 mm²
- Coil-Ø max. 830 mm
Transport chain 80 m wide with rubbered top
Top pressure with v-belt, motorical height adjustment and digital display
Power Control PC22 with SPS-Control
Pre-milling unit
- 2 Motors each 3 KW
Workpiece pre-heating
- Gluing pot for PU-granulate (without preheating)
Autom. adjusment of pressure zone
1 driven pre-pressure roller, Ø 150 mm
6 post-pressure roller, Ø 70 mm
Edge magazine 6 Rollen
- Edge thickness 6x3 mm
- Coil-Ø 6x830
- Rest length monitoring at 2400 mm
End trimming unit HL 04 / 05
for workpieces with surface layer overhang up to max. 10 mm
Feed stepless controllable 18-25 m/min
Sliding table 500x1600 mm
Rough milling unit 1,5 kW
- 2 Motors each 1,5 kW, one above the other
Form milling unit FK 13, 8-fold automatical
- 2 Motors each 0,4 kW
600 mm empty space
Multi-post-cleaning device MN21 automatical
Finish unit FA11 top / bottom
- Post-cleaning glued joint
- Cleaning agent application
- Buffing unit
Set up during the transport of the next workpiece, so the machine need not to be driven until there are no workpieces in it.


Optional available for an extra charge:
Workpiece return Ligmatech
Typ: ZHR 05/L/095
Air cushion table: 2500 mm long, 1000 mm wide about approx. 60 mm inclined positioned
Transport belt: wide 900 mm
Not driven roller conveyor: Length 2000 mm, width 900 mm
Extension of roller conveyor about 500 mm
Overhang: approx. 250 mm
Belt cleaning, single-fold
Workpieces:
Length 300-2500 mm or. 300-800 mm
Width 60-800 mm or. 800-2000 mm
Thickness 8-60 mm
Weight max. 50 kg
Hot-Air-System
make Schugoma
type: EdgeKing
Year: 2017
- for edgeband materials with functional layer.
The functional or reaction layer in the same color as the edge material itself will be dissolved and connects edge material and workpieces.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Board thickness 60 mm
Edge thickness 18 mm
Feed advance 18 m/min
Sound-proof cabin Yes
Glue tank Yes
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible
Datasheet Homag OPTIMAT KAL 310/7/A20/S2
Client type Reseller
Active since 2013
Offers online 33
Last activity March 28, 2024

Description

Single sided edge banding machine
Brand: Homag
Type: Optimat KAL 310/8/A20/S2
Year: 2007

Stop on the left hand side

Highest edge banding quality in series by the optional available Schugoma Kantenking or the use of PUR glue is also possible.

Technical data:
- Feed 18 m/min
- Working height 950 mm
- Working width min.:
55mm at workpiece thickness 22 mm, 100 mm at workpiece thickness 60 mm
(depending on the workpiece length)
- Workpiece overhang 30 mm
- Workpiece thickness 12-60 mm
- Edge material coil 0,3-3 mm
- Edge cross sectional area max. at PVC 135 mm², at veneer 100 mm²
- Coil-Ø max. 830 mm
Transport chain 80 m wide with rubbered top
Top pressure with v-belt, motorical height adjustment and digital display
Power Control PC22 with SPS-Control
Pre-milling unit
- 2 Motors each 3 KW
Workpiece pre-heating
- Gluing pot for PU-granulate (without preheating)
Autom. adjusment of pressure zone
1 driven pre-pressure roller, Ø 150 mm
6 post-pressure roller, Ø 70 mm
Edge magazine 6 Rollen
- Edge thickness 6x3 mm
- Coil-Ø 6x830
- Rest length monitoring at 2400 mm
End trimming unit HL 04 / 05
for workpieces with surface layer overhang up to max. 10 mm
Feed stepless controllable 18-25 m/min
Sliding table 500x1600 mm
Rough milling unit 1,5 kW
- 2 Motors each 1,5 kW, one above the other
Form milling unit FK 13, 8-fold automatical
- 2 Motors each 0,4 kW
600 mm empty space
Multi-post-cleaning device MN21 automatical
Finish unit FA11 top / bottom
- Post-cleaning glued joint
- Cleaning agent application
- Buffing unit
Set up during the transport of the next workpiece, so the machine need not to be driven until there are no workpieces in it.


Optional available for an extra charge:
Workpiece return Ligmatech
Typ: ZHR 05/L/095
Air cushion table: 2500 mm long, 1000 mm wide about approx. 60 mm inclined positioned
Transport belt: wide 900 mm
Not driven roller conveyor: Length 2000 mm, width 900 mm
Extension of roller conveyor about 500 mm
Overhang: approx. 250 mm
Belt cleaning, single-fold
Workpieces:
Length 300-2500 mm or. 300-800 mm
Width 60-800 mm or. 800-2000 mm
Thickness 8-60 mm
Weight max. 50 kg
Hot-Air-System
make Schugoma
type: EdgeKing
Year: 2017
- for edgeband materials with functional layer.
The functional or reaction layer in the same color as the edge material itself will be dissolved and connects edge material and workpieces.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Board thickness 60 mm
Edge thickness 18 mm
Feed advance 18 m/min
Sound-proof cabin Yes
Glue tank Yes
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2013
Offers online 33
Last activity March 28, 2024