Sorry, this offer is no longer available on Exapro

Used CNC Working Center HOMAG OPTIMAT BAZ 32

Here is a selection of similar machines

CONTROL SYSTEM
• NC Homatic, system NC 81 based on PLC
• Nr. 4 control axis (x,y,z,c) - Rotation 360°
• Moving speed max:
- 80 m/min X-Y axes
- 30 m/min Z axis
TECHNICAL DETAILS
• Piece length:
- max 3.700 mm for single processing
- max 1.250 mm for alternated processing
• Piece width max 1.200 mm
• Piece thickness:
- with edgebanding max 40 mm
- without edgebanding max 60 mm
FLAT WORKING TABLE with rollaway backstop and possibility of installation of locking depression devices for pieces
• Nr. 8 Frontal stops (4 + 4)
• Nr. 4 Back stops (2 + 2)
• Nr. 4 Side stops (2 + 2)
• Nr. 12 Locking suction cups dual action
• Nr. 2 Vacuum pumps 100 m3
GLUING UNIT 360°/SINGLE EDGE
• Edge height max 45 mm
• Plastic edge thickness min - max 0,4-3 mm
• Edge length min 230 mm
• Nr. 1 Magazine for edges with nr. 3 positions
BORING UNITS
• Nr. 1 Horizontal boring unit with 4 spindles
• Nr. 1 Vertical boring unit with indipendent spindles
OPERATING UNITS - Rotation from 0 to 360°
• Nr. 1 Electrospindle 7,5 kW - HSK F63
• Milling tools diameter max 150 mm
• Nr. 1 End trimming saw blade unit 180 x 30 x 3,2 Z = 54
• Nr. 1 Rough trimming unit
TOOL CHANGER MAGAZINE WITH NR. 12 POSITIONS - HSK F63
• Circular magazine with 12 positions for tools/groups
ELECTRICAL EQUIPMENT
• Separate electrical cabinet
• Operating voltage 380/400 Volt 50/60 Hz
NORM AND OPTIONAL FOR SECURITY
• CE Marks
• Frontal Electronic security mats

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

X stroke 3700 mm
Y stroke 1200 mm
Z stroke 60 mm
Axis nbr 4
Tool changer positions 12
CNC type
-------------------
Worked hours
Hours under power
State good
At local norms yes
Status
Datasheet Homag OPTIMAT BAZ 32
Client type Reseller
Active since 2014
Offers online 30
Last activity March 20, 2024

Description

CONTROL SYSTEM
• NC Homatic, system NC 81 based on PLC
• Nr. 4 control axis (x,y,z,c) - Rotation 360°
• Moving speed max:
- 80 m/min X-Y axes
- 30 m/min Z axis
TECHNICAL DETAILS
• Piece length:
- max 3.700 mm for single processing
- max 1.250 mm for alternated processing
• Piece width max 1.200 mm
• Piece thickness:
- with edgebanding max 40 mm
- without edgebanding max 60 mm
FLAT WORKING TABLE with rollaway backstop and possibility of installation of locking depression devices for pieces
• Nr. 8 Frontal stops (4 + 4)
• Nr. 4 Back stops (2 + 2)
• Nr. 4 Side stops (2 + 2)
• Nr. 12 Locking suction cups dual action
• Nr. 2 Vacuum pumps 100 m3
GLUING UNIT 360°/SINGLE EDGE
• Edge height max 45 mm
• Plastic edge thickness min - max 0,4-3 mm
• Edge length min 230 mm
• Nr. 1 Magazine for edges with nr. 3 positions
BORING UNITS
• Nr. 1 Horizontal boring unit with 4 spindles
• Nr. 1 Vertical boring unit with indipendent spindles
OPERATING UNITS - Rotation from 0 to 360°
• Nr. 1 Electrospindle 7,5 kW - HSK F63
• Milling tools diameter max 150 mm
• Nr. 1 End trimming saw blade unit 180 x 30 x 3,2 Z = 54
• Nr. 1 Rough trimming unit
TOOL CHANGER MAGAZINE WITH NR. 12 POSITIONS - HSK F63
• Circular magazine with 12 positions for tools/groups
ELECTRICAL EQUIPMENT
• Separate electrical cabinet
• Operating voltage 380/400 Volt 50/60 Hz
NORM AND OPTIONAL FOR SECURITY
• CE Marks
• Frontal Electronic security mats

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

X stroke 3700 mm
Y stroke 1200 mm
Z stroke 60 mm
Axis nbr 4
Tool changer positions 12
CNC type
-------------------
Worked hours
Hours under power
State good
At local norms yes
Status

About this seller

Client type Reseller
Active since 2014
Offers online 30
Last activity March 20, 2024