Sorry, this offer is no longer available on Exapro

Holzma Optimat HPP 250 Panel saw

Here is a selection of similar machines

Saw for saws, type HPP 250 Automatic saw for precise cutting of glued and non-glued wood-based panels and similar applications.
Test cuts must be made before cutting other materials. Technical data Projection of the saw above the table level of 72 mm
Saw carriage feed: forward 5-80 m / min 80 m / min
Beam feeder speed 60 m / min backwards 60 m / min
Saw motor 7.5 kW
Saw blade motor 1.1 kW
Terminal opening max. 66 mm
Working height 980 mm
1 main saw 350 x 4.4 x 75 mm 1 saw blade 200 x 4.4 - 5.5 x 45 mm
Air pressure 6 bar Voltage 380 V / 50 Hz
Average air velocity in the dust extraction system approx. 25 m / s
Suction hole diameter 1 x 180 mm 1 x 120 mm Operating temperature min. + 5 oC max + 35 oC
The machine is manufactured according to standards: CE, GS, FPH-Dust Technical data according to customer requirements: Cut length 3200 mm
Cutting width 3200 mm 6 terminals, of which the first 3 - double fingers, all further graduations of two fingers 75/275/475/1050/1850/2650 from the angular (leading) scale to the center of the terminals
3 tables on the receiving side with air cushion 3 x 1800 x 600

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Cutting length 3200 mm
Cutting height 980 mm
Type horizontal
Table length 5000 mm
Table width 2500 mm
Blade diameter 350 mm
Engine power 11 kW
Scoring unit Yes
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Holzma Optimat HPP 250
Client type Consultant
Active since 2020
Offers online 0
Last activity Dec. 9, 2022

Description

Saw for saws, type HPP 250 Automatic saw for precise cutting of glued and non-glued wood-based panels and similar applications.
Test cuts must be made before cutting other materials. Technical data Projection of the saw above the table level of 72 mm
Saw carriage feed: forward 5-80 m / min 80 m / min
Beam feeder speed 60 m / min backwards 60 m / min
Saw motor 7.5 kW
Saw blade motor 1.1 kW
Terminal opening max. 66 mm
Working height 980 mm
1 main saw 350 x 4.4 x 75 mm 1 saw blade 200 x 4.4 - 5.5 x 45 mm
Air pressure 6 bar Voltage 380 V / 50 Hz
Average air velocity in the dust extraction system approx. 25 m / s
Suction hole diameter 1 x 180 mm 1 x 120 mm Operating temperature min. + 5 oC max + 35 oC
The machine is manufactured according to standards: CE, GS, FPH-Dust Technical data according to customer requirements: Cut length 3200 mm
Cutting width 3200 mm 6 terminals, of which the first 3 - double fingers, all further graduations of two fingers 75/275/475/1050/1850/2650 from the angular (leading) scale to the center of the terminals
3 tables on the receiving side with air cushion 3 x 1800 x 600

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Cutting length 3200 mm
Cutting height 980 mm
Type horizontal
Table length 5000 mm
Table width 2500 mm
Blade diameter 350 mm
Engine power 11 kW
Scoring unit Yes
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Consultant
Active since 2020
Offers online 0
Last activity Dec. 9, 2022