Sorry, this offer is no longer available on Exapro

HOLZMA - BARGSTEDT PROFI HPP23/65/65/X Panel saw

Here is a selection of similar machines

Automatic panel sizing beam saw, rear loading with vacuum

Cutting sizes: 6500 mm x 6500 mm.
Sawblade projection: 140 mm.
Main saw motor 18 kw / scoring motor 2,2 kw
Main sawblade 520 x 4,8 x 60mm
Scoring sawblade 200 x 4,8-5,8 x 45 mm
Feed speed of saw carriage: 5-100 m/min forward, 100 m/min reverse
Feed speed of programmable fence: 80 m/min (limited to 25 m/min for safety reasons)
10 grippers
Max. gripper opening: 185 mm
Double sided aligning roller, min/max alignable panel width: 50 / 2200 mm

5 pcs air flotation tables in the front, each 2810 x 650 mm
Incorporated rotary platform with vacuum cups for doing head cuts
(limitation on the panel size in case of thin panels)
Automaic pusher for the evacuation of cut strips
Controlls: CADmatic
Hardware: Windows NT - 17" display
Lateral vacuum bridge making the panel stack to be cut
Roller conveyor transfer towards the rear of the saw (made by Bargstedt)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Cutting length 6500 mm
Cutting height 6500 mm
Table length 2810 mm
Table width 650 mm
Engine power 20.2 kW
Scoring unit Yes
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2019
Offers online 76
Last activity March 27, 2024

Description

Automatic panel sizing beam saw, rear loading with vacuum

Cutting sizes: 6500 mm x 6500 mm.
Sawblade projection: 140 mm.
Main saw motor 18 kw / scoring motor 2,2 kw
Main sawblade 520 x 4,8 x 60mm
Scoring sawblade 200 x 4,8-5,8 x 45 mm
Feed speed of saw carriage: 5-100 m/min forward, 100 m/min reverse
Feed speed of programmable fence: 80 m/min (limited to 25 m/min for safety reasons)
10 grippers
Max. gripper opening: 185 mm
Double sided aligning roller, min/max alignable panel width: 50 / 2200 mm

5 pcs air flotation tables in the front, each 2810 x 650 mm
Incorporated rotary platform with vacuum cups for doing head cuts
(limitation on the panel size in case of thin panels)
Automaic pusher for the evacuation of cut strips
Controlls: CADmatic
Hardware: Windows NT - 17" display
Lateral vacuum bridge making the panel stack to be cut
Roller conveyor transfer towards the rear of the saw (made by Bargstedt)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Cutting length 6500 mm
Cutting height 6500 mm
Table length 2810 mm
Table width 650 mm
Engine power 20.2 kW
Scoring unit Yes
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 76
Last activity March 27, 2024