Sorry, this offer is no longer available on Exapro

Holzher Dynestic Wood CNC machining centre

Here is a selection of similar machines

New car

Numerical Control with Hops software

Working field in X axis 4300 mm

Working field in Y axis 2200 mm

FT nesting full plane worktop - division of the worktop into different independent zones directly from C.N.

Back stops + front stops + right side stops + left side stops

Blower for cleaning the work surface

N ° 1 5-axis electrospindle, with automatic tool change, Hsk type cones

Drilling head with 8 vertical spindles + 4 horizontal spindles

Blade unit integrated in the drilling head on X axis - diam. 120 mm

Automatic tool change system with 14 positions - positioned on the rear of the machine

Automatic unloading system with motorized belt

Barcode labeling machine

Front protection and safety system with carpets and perimeter nets

Automatic lubrication system

Air conditioning system for the electrical panel

N ° 2 vacuum pumps, one of 250 and one of 500 m3 / h

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

X stroke 4300 mm
Y stroke 2200 mm
Vacuum pump 500 m³/h
CNC type Hops
-------------------
Worked hours
Hours under power
State good
At local norms yes
Status visible
Client type Reseller
Active since 2020
Offers online 120
Last activity March 27, 2024

Description

New car

Numerical Control with Hops software

Working field in X axis 4300 mm

Working field in Y axis 2200 mm

FT nesting full plane worktop - division of the worktop into different independent zones directly from C.N.

Back stops + front stops + right side stops + left side stops

Blower for cleaning the work surface

N ° 1 5-axis electrospindle, with automatic tool change, Hsk type cones

Drilling head with 8 vertical spindles + 4 horizontal spindles

Blade unit integrated in the drilling head on X axis - diam. 120 mm

Automatic tool change system with 14 positions - positioned on the rear of the machine

Automatic unloading system with motorized belt

Barcode labeling machine

Front protection and safety system with carpets and perimeter nets

Automatic lubrication system

Air conditioning system for the electrical panel

N ° 2 vacuum pumps, one of 250 and one of 500 m3 / h

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

X stroke 4300 mm
Y stroke 2200 mm
Vacuum pump 500 m³/h
CNC type Hops
-------------------
Worked hours
Hours under power
State good
At local norms yes
Status visible

About this seller

Client type Reseller
Active since 2020
Offers online 120
Last activity March 27, 2024