CNC-Controlled Gear Honing Machine
Model RZR
Year 1996
Wheel-Æ min./max. 10 - 240 mm
Module 0,5 - 5
Lead angle +/- 30 °
Stroke of slide of workpieces ( Z-axis) 275 mm
Stroke of Honing tool cross ( X-axis ) 128 mm
Feed of X-axis 0,001 mm/stroke
Crown approx. 0,5 °
Workpiece-clamping length approx. 500 mm
Workpiece-Oscillation max. approx. 3.000 mm
Honing tool-Ø external/internal x width 325/308 x 45 mm
Speed of honing tool 100 – 1.200 rpm.
Dressing speed of honing tool 30 – 1.000 rpm
Spindle drive 4 kW - Total electrical load approx.. 12 kW - 400 V – 50 cycles
Total weight approx. 5.000 kg

Accessories/Special Features:
· SIEMENS - CNC-Track-Control Model 810 G allows the input of all relevant Gear tooth data and fitting of workpiece with interactive control. Including DNC-interfaceRS 232 for input- and display of data. A-axis = Lead angle/Z-axis = table movement/X-axis = feed of honing tool, S-axis =speed of honing wheel, U-axis = Crowning device
· Including mounted facility for automatic pitching of the honing disc into the tooth gap
· The tool swivelling angle (A-xis) is also adjusted electronically, fast and precise, and hydraulically
clamped, which means short re-setting times.
· hydraulic workpiece clamping by foot pedal between the workpiece spindle stock and tailstock, both units can travel on the workpiece table as specified by the workpiece.
· complete working area protection with sliding doors and safety latch
· Complex Original-REISHAUER honing oil recycling facility Model RTO 40.10 including centrifuge and Cooling aggregate for constant honing oil temperature, oil mist filter, etc.
· Various diamond-dressing tools within taper mandrels.
· separate switching- and control cabinet, ventilated and air-conditioned, separate hydraulic facility, Ideal machine for
high precision finishing of hardened tooth flanks.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Max wheel Ø 120 mm
Module + 3
Module - 1
CNC Yes
CNC type
Max. gear width 52 mm
Max. spindle speed 2300 rpm
Max. workpiece weight 7 kg
Motor power 20 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Reishauer RZP
Client type Reseller
Active since 2019
Offers online 145
Last activity March 27, 2024

Description

CNC-Controlled Gear Honing Machine
Model RZR
Year 1996
Wheel-Æ min./max. 10 - 240 mm
Module 0,5 - 5
Lead angle +/- 30 °
Stroke of slide of workpieces ( Z-axis) 275 mm
Stroke of Honing tool cross ( X-axis ) 128 mm
Feed of X-axis 0,001 mm/stroke
Crown approx. 0,5 °
Workpiece-clamping length approx. 500 mm
Workpiece-Oscillation max. approx. 3.000 mm
Honing tool-Ø external/internal x width 325/308 x 45 mm
Speed of honing tool 100 – 1.200 rpm.
Dressing speed of honing tool 30 – 1.000 rpm
Spindle drive 4 kW - Total electrical load approx.. 12 kW - 400 V – 50 cycles
Total weight approx. 5.000 kg

Accessories/Special Features:
· SIEMENS - CNC-Track-Control Model 810 G allows the input of all relevant Gear tooth data and fitting of workpiece with interactive control. Including DNC-interfaceRS 232 for input- and display of data. A-axis = Lead angle/Z-axis = table movement/X-axis = feed of honing tool, S-axis =speed of honing wheel, U-axis = Crowning device
· Including mounted facility for automatic pitching of the honing disc into the tooth gap
· The tool swivelling angle (A-xis) is also adjusted electronically, fast and precise, and hydraulically
clamped, which means short re-setting times.
· hydraulic workpiece clamping by foot pedal between the workpiece spindle stock and tailstock, both units can travel on the workpiece table as specified by the workpiece.
· complete working area protection with sliding doors and safety latch
· Complex Original-REISHAUER honing oil recycling facility Model RTO 40.10 including centrifuge and Cooling aggregate for constant honing oil temperature, oil mist filter, etc.
· Various diamond-dressing tools within taper mandrels.
· separate switching- and control cabinet, ventilated and air-conditioned, separate hydraulic facility, Ideal machine for
high precision finishing of hardened tooth flanks.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Max wheel Ø 120 mm
Module + 3
Module - 1
CNC Yes
CNC type
Max. gear width 52 mm
Max. spindle speed 2300 rpm
Max. workpiece weight 7 kg
Motor power 20 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 145
Last activity March 27, 2024

Here is a selection of similar machines

Reishauer RZR Gear grinding machine