Manufacturer Heraeus Vötsch
Model VUK 08/1500
Year 1987
Location Czech Republic CZ
Category Measure - controls - Miscellaneous
Product id P80828020

€12,000

Contact the seller

You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller

Client type Reseller
Active since 2019
Offers online 133
Last activity Nov. 23, 2020

Specifications

-------------------
Weight 1800 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

Power range for temperature tests:
- temperature range:
- -80 ° C to + 180 ° C
- temperature deviations:
- see the table below
- heating the medium without test specimens:
- 1.5 ° C / min to -70 ° C
- 1.0 ° C / min to -80 ° C
Heat compensation:
- + 20 ° C approx. 1600 W
- ± 0 ° C approx. 1100W
- -20 ° C approx. 800W
- -40 ° C approx. 600W
- -60 ° C approx. 300 W
- -80 ° C approx. 50W
performance range for climatic tests:
- Temperature range + 10 ° C to + 90 ° C
- wet area: see the following diagram
- wet deviations: see the following table
- air: about 0.1 to 4 m3 / h
size and weight:
- Dimensions in mm:
- test area:
- width a = 1000
- Depth b = 1500
- height c = 1000
- Weight approx. 1.800 kg net
execution:
- test area:
- stainless steel, material 1.4301
- Floor load max. 300 kg / m2
- Spot load max. 30 kg
- alignment of over and underpressure
- air guidance:
- fan with external motor
- suction at the rear
- air supply on all sides
- Doors:
- opening to the right
- color: RAL 3016 (coral)
- control window:
- 500x500 mm heated
- test area:
- test lamp bulb - 24V, 2x40W
- case:
- Galvanized galvanized sheet steel
- Color: RAL 7032 (gray stone)
- insulation:
- Two-layer insulation with external and internal vapor barrier
-cooler:
- Cascade, water-cooled, 1x2,2 / 2,2 kW
- Climate system:
- BE 15 with automatic water inlet
- control:
- Two-point control for temperature and humidity measurement
- Setting the setpoint with the potentiometer
- digital and real value
- electronic controller including Pt 100 sensor 43 760 class B for temperature and humidity control
- moisture measurement psychometrically
- Light schematic graph with function and fault indication
- Safety:
- Adjustable thermal fuse
- temperature sensor TW and temperature limiter TB
- error message - potential-free contact, maximum value 24V, 3A
- connection
- electrical connection:
- Rated voltage: 380V ± 5% 3 / N 50Hz
- Rated power: 10 kW
- Rated current: 24 A
- Connection: Cekon plug 35 A
- securing: 35 A inertial
- Degree of protection: IP 20
- processes:
- connecting hose for cleaning and draining condensate 1/2 "
- Humidifiers and dehumidifiers
- Cooling water connection:
- water supply R 3/4 "
- drain water R 34 "
- Water pressure 3 to 6 bar
- Required pressure difference between input and output> 2.5 bar
- cooling water consumption, depending on the operating conditions: 300 to 1000 l / h
- Note:
- the noise level is approximately 70 dB (A), measured at a distance of 2 m
- Permissible ambient temperature +15 ° C to +35 ° C, max. 75% RH
- the values ​​given refer to the ambient temperature +23 ° C ± 2 ° C and the cooling water temperature +18 ° C
- the values ​​are valid unless otherwise stated, without test specimens, without irradiation and without additional equipment
- Place in a dry, ventilated room
Price by agreement.

Please note that this description may have been translated automatically. Contact us for further information.

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines

Share

Contact the seller