HELLER MCi 25 Horizontal machining center
Price on request
| Axis X | 800 mm |
| Axis Y | 800 mm |
| Axis Z | 800 mm |
| Rotary table (4th axis) | no |
| CNC | siemens sinumerik 840d |
| Number of tool pockets | 80 |
| Spindle taper | hsk 63 |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status |
This HELLER MCi 25 is a 4-axis horizontal CNC machining centre manufactured in 2003 by Gebr. Heller Maschinenfabrik GmbH, Germany. It offers substantial machining capacity with X, Y, and Z axis travels of 800 mm each, complemented by a B-axis capable of 360° indexing, ideal for complex and precise machining tasks. The machine is equipped with a large tool magazine holding 80 tool slots, allowing for extensive tooling options and reduced downtime due to tool changes. It supports a total of 6 pallets, with 2 currently in use and 4 on standby, enhancing productivity through efficient pallet handling.
The machining centre features a Siemens Sinumerik 840D control system, known for reliability and advanced CNC functionalities. The spindle uses an HSK 63 taper, suitable for high-precision tool holding. Electrical specifications include a 400 V supply at 50 Hz frequency with a nominal current of approximately 99 to 100 A and a connection load of 65 kVA.
The machine is housed within a protective enclosure with ventilation ducts, showing signs of use such as scratches and wear, which is typical for equipment of this age. The work area contains metal shavings and shows evidence of regular machining activity. Inside, the rotary table and spindle area exhibit some residue and discoloration consistent with usage. Hydraulic and electrical components, including motors and piping, appear clean and well maintained.
Additional visible features include a control panel with a large rotary switch labeled "HAUPTSCHALTER," and a nearby computer workstation with a monitor and keyboard for operator interface. Overall, this HELLER MCi 25 machining centre is a robust and versatile machine suitable for demanding manufacturing environments requiring multi-axis machining capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 4-axis HELLER MCi 25 was manufactured in 2003. It features a generous X, Y, and Z-axis travel of 800 mm each, along with a B-axis capable of 360° indexing. The machine is equipped with a tool magazine holding 80 slots and supports a total of 6 pallets. If you are looking to get high-quality machining capabilities, consider the HELLER MCi 25 horizontal machining centre we have for sale. Contact us for further details.B-axis: 360° (indexing/rundtisch)
Tool magazine: 80 slots
Pallet quantity: 6 total (2 in use, 4 standby)
Operating hours: approx. 2,700–3,000 hours per year (counter reported defective)
Total estimated hours: approx. 54,000–60,000 (based on 2-shift operation since 2006)
Coolant volume: 1,500 liters
Voltage: 400 V
Frequency: 50 Hz
Full load current: 100 A
Connection load: 65 kVA
Status: Fully functional, under power, currently in production
Control Brand: SIEMENS
Control Model: Sinumerik 840D
Number of Axes: 4
Number of Tools: 80
Taper Size: HSK 63
X-axis Travel: 800 mm
Y-axis Travel: 800 mm
Z-axis Travel: 800 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1974 |
| Last activity | May 21, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 4-axis HELLER MCi 25 was manufactured in 2003. It features a generous X, Y, and Z-axis travel of 800 mm each, along with a B-axis capable of 360° indexing. The machine is equipped with a tool magazine holding 80 slots and supports a total of 6 pallets. If you are looking to get high-quality machining capabilities, consider the HELLER MCi 25 horizontal machining centre we have for sale. Contact us for further details.B-axis: 360° (indexing/rundtisch)
Tool magazine: 80 slots
Pallet quantity: 6 total (2 in use, 4 standby)
Operating hours: approx. 2,700–3,000 hours per year (counter reported defective)
Total estimated hours: approx. 54,000–60,000 (based on 2-shift operation since 2006)
Coolant volume: 1,500 liters
Voltage: 400 V
Frequency: 50 Hz
Full load current: 100 A
Connection load: 65 kVA
Status: Fully functional, under power, currently in production
Control Brand: SIEMENS
Control Model: Sinumerik 840D
Number of Axes: 4
Number of Tools: 80
Taper Size: HSK 63
X-axis Travel: 800 mm
Y-axis Travel: 800 mm
Z-axis Travel: 800 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Axis X | 800 mm |
| Axis Y | 800 mm |
| Axis Z | 800 mm |
| Rotary table (4th axis) | no |
| CNC | siemens sinumerik 840d |
| Number of tool pockets | 80 |
| Spindle taper | hsk 63 |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status |
This HELLER MCi 25 is a 4-axis horizontal CNC machining centre manufactured in 2003 by Gebr. Heller Maschinenfabrik GmbH, Germany. It offers substantial machining capacity with X, Y, and Z axis travels of 800 mm each, complemented by a B-axis capable of 360° indexing, ideal for complex and precise machining tasks. The machine is equipped with a large tool magazine holding 80 tool slots, allowing for extensive tooling options and reduced downtime due to tool changes. It supports a total of 6 pallets, with 2 currently in use and 4 on standby, enhancing productivity through efficient pallet handling.
The machining centre features a Siemens Sinumerik 840D control system, known for reliability and advanced CNC functionalities. The spindle uses an HSK 63 taper, suitable for high-precision tool holding. Electrical specifications include a 400 V supply at 50 Hz frequency with a nominal current of approximately 99 to 100 A and a connection load of 65 kVA.
The machine is housed within a protective enclosure with ventilation ducts, showing signs of use such as scratches and wear, which is typical for equipment of this age. The work area contains metal shavings and shows evidence of regular machining activity. Inside, the rotary table and spindle area exhibit some residue and discoloration consistent with usage. Hydraulic and electrical components, including motors and piping, appear clean and well maintained.
Additional visible features include a control panel with a large rotary switch labeled "HAUPTSCHALTER," and a nearby computer workstation with a monitor and keyboard for operator interface. Overall, this HELLER MCi 25 machining centre is a robust and versatile machine suitable for demanding manufacturing environments requiring multi-axis machining capabilities.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1974 |
| Last activity | May 21, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Хоризонтален обработващ център HELLER MCi 25
Horizontální obráběcí centrum HELLER MCi 25
HELLER MCi 25 Vandret bearbejdningscenter
HELLER MCi 25 Horizontales Bearbeitungszentrum
Οριζόντιο κέντρο κατεργασίας HELLER MCi 25
HELLER MCi 25 Horizontal machining center
Centro de mecanizado horizontal HELLER MCi 25
Centre d'usinage horizontal HELLER MCi 25
Horizontalni obradni centar HELLER MCi 25
HELLER MCi 25 Vízszintes megmunkáló központ
Centro di lavoro orizzontale HELLER MCi 25
HELLER MCi 25 Horizontalus apdirbimo centras
HELLER MCi 25 Horizontaal bewerkingscentrum
Centrum obróbcze poziome HELLER MCi 25
Centro de usinagem horizontal HELLER MCi 25
Centru de prelucrare orizontal HELLER MCi 25
HELLER MCi 25 Горизонтальный обрабатывающий центр
Horizontalni obradni centar HELLER MCi 25
HELLER MCi 25 Horisontellt bearbetningscenter
Yatay işleme merkezi HELLER MCi 25
EN
- Languages
English (GB)