Price on request
Make an offer| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 20/04/2026 |
This listing features a Heller MARK-88 hydraulic press with a capacity of 88 tons (80 metric tons). It is equipped with a twin air counterbalance in frame and a variable speed drive, allowing strokes per minute to be adjusted between 45 and 75. The press includes a 4-inch thick bolster plate and an overload protector to help ensure operational safety. A lubrication system is integrated to support maintenance and smooth operation.
The stroke length of the press is 5.9 inches, with a die height of 12.9 inches (SDAU) and a slide adjustment range of 3.2 inches. The slide area measures 22 inches left-to-right by 18 inches front-to-back, while the bolster area spans 41.3 inches by 23.6 inches. The bolster thickness is 5.5 inches, and the opening in the bed is 21 inches by 14.9 inches. The motor power is rated at 10 HP, with an additional 0.5 HP motor for slide adjustment.
The press requires a floor space of approximately 50 inches by 72 inches and has an overall height of 118 inches. It weighs around 15,000 pounds.
The machine is painted blue and marked with the model name "MARK-88" on the top front. It shows signs of wear consistent with use, including paint chipping and some surface rust. Yellow safety barriers are installed on the sides of the press, enhancing operator safety. The control panel, mounted on the right side, features various buttons, switches, and meters, including two analog meters, a key switch, and a rotary knob. Labels on the panel indicate controls for oil, oil lubrication, air supply, and motor functions. The control panel exhibits some rust and dirt accumulation, reflecting its age.
The pressing area includes a yellow safety cover with warning labels such as "DANGER KEEP HANDS CLEAR" and "DANGER PINCH POINT." The metal worktable beneath the ram has T-slots for mounting fixtures and shows some wear and discoloration but appears functional. A handwritten marking "P4" is visible on the yellow safety cover.
This press is suitable for industrial applications requiring adjustable speed and significant tonnage capacity. Potential buyers should note the visible signs of wear and consider inspection for operational condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
EQUIPPED WITH:
Twin Air Counterbalance In Frame
Variable Speed Drive
4" Thick Bolster Plate
Overload Protector
Lubrication System
CATALOG SPECIFICATIONS:
Tonnage Capacity, U.S. 88 TON
Tonnage Capacity, Metric 80 TON
Stroke Length 5.9"
Die Height, (SDAU) 12.9"
Slide Adjustment ......... 3.2"
Slide Area, L-R x F-B ......... 22" x 18"
Bolster Area, L-R x F-B ......... 41.3" x 23.6"
Bolster Thickness ......... 5.5"
Opening In Bed, L-R x F-B ......... 21" x 14.9"
Strokes Per Minute, Variable ......... 45 to 75 SPM
Motor, Horsepower ......... 10 HP
Slide Adjustment Motor ......... 0.5 HP
Floor Space Required, W x D ......... 50" x 72"
Overall Height ......... 118"
Weight Approximately ......... 15000 LBS
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 45 |
| Last activity | April 18, 2026 |
EQUIPPED WITH:
Twin Air Counterbalance In Frame
Variable Speed Drive
4" Thick Bolster Plate
Overload Protector
Lubrication System
CATALOG SPECIFICATIONS:
Tonnage Capacity, U.S. 88 TON
Tonnage Capacity, Metric 80 TON
Stroke Length 5.9"
Die Height, (SDAU) 12.9"
Slide Adjustment ......... 3.2"
Slide Area, L-R x F-B ......... 22" x 18"
Bolster Area, L-R x F-B ......... 41.3" x 23.6"
Bolster Thickness ......... 5.5"
Opening In Bed, L-R x F-B ......... 21" x 14.9"
Strokes Per Minute, Variable ......... 45 to 75 SPM
Motor, Horsepower ......... 10 HP
Slide Adjustment Motor ......... 0.5 HP
Floor Space Required, W x D ......... 50" x 72"
Overall Height ......... 118"
Weight Approximately ......... 15000 LBS
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 20/04/2026 |
This listing features a Heller MARK-88 hydraulic press with a capacity of 88 tons (80 metric tons). It is equipped with a twin air counterbalance in frame and a variable speed drive, allowing strokes per minute to be adjusted between 45 and 75. The press includes a 4-inch thick bolster plate and an overload protector to help ensure operational safety. A lubrication system is integrated to support maintenance and smooth operation.
The stroke length of the press is 5.9 inches, with a die height of 12.9 inches (SDAU) and a slide adjustment range of 3.2 inches. The slide area measures 22 inches left-to-right by 18 inches front-to-back, while the bolster area spans 41.3 inches by 23.6 inches. The bolster thickness is 5.5 inches, and the opening in the bed is 21 inches by 14.9 inches. The motor power is rated at 10 HP, with an additional 0.5 HP motor for slide adjustment.
The press requires a floor space of approximately 50 inches by 72 inches and has an overall height of 118 inches. It weighs around 15,000 pounds.
The machine is painted blue and marked with the model name "MARK-88" on the top front. It shows signs of wear consistent with use, including paint chipping and some surface rust. Yellow safety barriers are installed on the sides of the press, enhancing operator safety. The control panel, mounted on the right side, features various buttons, switches, and meters, including two analog meters, a key switch, and a rotary knob. Labels on the panel indicate controls for oil, oil lubrication, air supply, and motor functions. The control panel exhibits some rust and dirt accumulation, reflecting its age.
The pressing area includes a yellow safety cover with warning labels such as "DANGER KEEP HANDS CLEAR" and "DANGER PINCH POINT." The metal worktable beneath the ram has T-slots for mounting fixtures and shows some wear and discoloration but appears functional. A handwritten marking "P4" is visible on the yellow safety cover.
This press is suitable for industrial applications requiring adjustable speed and significant tonnage capacity. Potential buyers should note the visible signs of wear and consider inspection for operational condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 45 |
| Last activity | April 18, 2026 |
Хидравлична преса Heller MARK-88
Hydraulický lis Heller MARK-88
Heller MARK-88 Hydraulisk presse
Heller MARK-88 Hydraulikpresse
Υδραυλική πίεση Heller MARK-88
HELLER MARK-88
Prensa hidráulica Heller MARK-88
Presse hydraulique Heller MARK-88
Hidraulična preša Heller MARK-88
Heller MARK-88 Hidraulikus nyomás
Pressa idraulica Heller MARK-88
Hidraulinis presas Heller MARK-88
Heller MARK-88 Hydraulische pers
Prasa hydrauliczna Heller MARK-88
Pressão hidráulica Heller MARK-88
Presa hidraulica Heller MARK-88
Heller MARK-88 Гидравлический пресс
Hidraulična presa Heller MARK-88
Heller MARK-88 Hydraulisk press
Hidrolik Pres Heller MARK-88
EN
- Languages
English (GB)