Price on request
Make an offer| Power in tons | 63 T |
| Table length | 450 mm |
| Table width | 1250 mm |
| Ram stroke | 60 mm |
| Nbr of strokes/min | 1000 |
| Engine Power | 400 kW |
| ------------------- | |
| Length x width x height | 3000.0 × 1700.0 × 3200.0 |
| Weight | 12000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Haulick & Roos RSH 630-1250 |
| Last availability date | 25/03/2026 |
This listing offers a HAULICK+ROOS hydraulic press, model RSH 630-1250, manufactured in 2004. The press has a nominal force capacity of 63 tons, suitable for various forging and pressing applications. It features a press table with a width of 1250 mm and a length of 450 mm, providing a substantial working surface. The ram stroke reaches up to 60 mm, with a maximum stroke rate of 1000 strokes per minute, allowing for efficient and rapid operation. The machine is powered by a 400 kW engine.
The press's overall dimensions are approximately 3000 mm in length, 1700 mm in width, and 3200 mm in height, with a total weight around 12,000 kg. It is equipped with an automatic slide adjustment system and a roll feeder for strip feeding. The shut height at bottom dead center (BDC) with stroke down and adjustment up is 320 mm.
Electrical requirements include a mains voltage of 400 V and a frequency of 50 Hz. Safety features include a safety guard or safety door, and the machine complies with European CE standards. The press includes a Sankyo V 76 roller feed and a PC control system model 2000/670, along with a Siegfried Advanced System 289 for tool protection.
The hydraulic press shows signs of use, with some wear marks and paint chipping on the lower front panel, consistent with normal operational conditions. Visible components include a yellow pressing component inside the machine, a control panel with buttons and switches on both front sides, and a touchscreen control panel branded with HAULICK+ROOS on a mobile or standalone unit. A blue coiled air hose and a metallic enclosure housing hydraulic or electrical components are mounted on the side. A yellow warning label is also visible on the side enclosure.
An orange bucket is present on the floor in front of the machine, likely for maintenance or cleaning purposes. The machine and its surrounding area appear clean and well-maintained. This hydraulic press is offered as-is and where-is, with no additional guarantees provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Offer Title: HAULICK+ROOS RSH 630-1250 Hydraulic Press
Manufacturer: HAULICK+ROOS
Model: RSH 630-1250
Year of Manufacture: 2004
Technical Condition: As-is, where-is
Press Forces:
Total Force (Nominal): 63 tons
Press Table:
Table Surface (Left-Right): 1250 mm
Table Surface (Front-Back): 730 mm
Slide:
Slide Force: 630 tons
Table Surface (Left-Right): 1250 mm
Table Surface (Front-Back): 450 mm
Automatic Slide Adjustment: Yes
Stroke Minimum: 12 mm
Stroke Maximum: 60 mm
Stroke Rate (Minimum): 30 /min
Stroke Rate (Maximum): 1000 /min
Tool Assembly Dimensions:
Shut Height (Stroke Down, Adjustment Up), BDC: 320 mm
Strip-Feeder:
Feeder Type: Roll Feeder
Electrical Specifications:
Mains Voltage: 400 V
Mains Frequency: 50 Hz
Dimensions / Weights:
Space Requirements (Left/Right): 3000 mm
Space Requirements (Front/Back): 1700 mm
Total Height: 3200 mm
Total Weight: Approx. 12000 kg
Attachments (Presses):
Strip Feeder: Yes
Safety Guard / Safety Door: Yes
European CE Standards: Yes
Operating Hours: 35,076 h
Feed: Sankyo v 76 Roller Feed
PC Control: 2000/670
Tool Protection: Siegfried Advanced System 289
Without Soundproof Enclosure
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 99 |
| Last activity | April 14, 2026 |
ProdEq Trading GmbH is a leading player in the Swiss trading landscape, specializing in high-quality equipment and solutions tailored for various industries. With a commitment to excellence and innovation, ProdEq has established itself as a trusted partner for businesses seeking reliable and efficient products. Their extensive portfolio includes cutting-edge machinery, tools, and accessories designed to meet the diverse needs of their clients. At the heart of ProdEq's operations is a dedication to customer satisfaction. The company prides itself on understanding the unique requirements of each client, ensuring that they receive personalized service and expert guidance. This customer-centric approach not only fosters long-term relationships but also positions ProdEq as a go-to resource for businesses looking to enhance their operational efficiency. In addition to their impressive product offerings, ProdEq Trading GmbH is committed to sustainability and responsible sourcing. They prioritize environmentally friendly practices in their supply chain, ensuring that their products not only perform exceptionally but also contribute to a greener future. With a strong foundation built on integrity, quality, and innovation, ProdEq Trading GmbH is poised to continue its growth and success in the competitive trading market. Whether you are a small business or a large corporation, ProdEq is ready to support your needs with unparalleled expertise and a comprehensive range of solutions.
Offer Title: HAULICK+ROOS RSH 630-1250 Hydraulic Press
Manufacturer: HAULICK+ROOS
Model: RSH 630-1250
Year of Manufacture: 2004
Technical Condition: As-is, where-is
Press Forces:
Total Force (Nominal): 63 tons
Press Table:
Table Surface (Left-Right): 1250 mm
Table Surface (Front-Back): 730 mm
Slide:
Slide Force: 630 tons
Table Surface (Left-Right): 1250 mm
Table Surface (Front-Back): 450 mm
Automatic Slide Adjustment: Yes
Stroke Minimum: 12 mm
Stroke Maximum: 60 mm
Stroke Rate (Minimum): 30 /min
Stroke Rate (Maximum): 1000 /min
Tool Assembly Dimensions:
Shut Height (Stroke Down, Adjustment Up), BDC: 320 mm
Strip-Feeder:
Feeder Type: Roll Feeder
Electrical Specifications:
Mains Voltage: 400 V
Mains Frequency: 50 Hz
Dimensions / Weights:
Space Requirements (Left/Right): 3000 mm
Space Requirements (Front/Back): 1700 mm
Total Height: 3200 mm
Total Weight: Approx. 12000 kg
Attachments (Presses):
Strip Feeder: Yes
Safety Guard / Safety Door: Yes
European CE Standards: Yes
Operating Hours: 35,076 h
Feed: Sankyo v 76 Roller Feed
PC Control: 2000/670
Tool Protection: Siegfried Advanced System 289
Without Soundproof Enclosure
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 63 T |
| Table length | 450 mm |
| Table width | 1250 mm |
| Ram stroke | 60 mm |
| Nbr of strokes/min | 1000 |
| Engine Power | 400 kW |
| ------------------- | |
| Length x width x height | 3000.0 × 1700.0 × 3200.0 |
| Weight | 12000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Haulick & Roos RSH 630-1250 |
| Last availability date | 25/03/2026 |
This listing offers a HAULICK+ROOS hydraulic press, model RSH 630-1250, manufactured in 2004. The press has a nominal force capacity of 63 tons, suitable for various forging and pressing applications. It features a press table with a width of 1250 mm and a length of 450 mm, providing a substantial working surface. The ram stroke reaches up to 60 mm, with a maximum stroke rate of 1000 strokes per minute, allowing for efficient and rapid operation. The machine is powered by a 400 kW engine.
The press's overall dimensions are approximately 3000 mm in length, 1700 mm in width, and 3200 mm in height, with a total weight around 12,000 kg. It is equipped with an automatic slide adjustment system and a roll feeder for strip feeding. The shut height at bottom dead center (BDC) with stroke down and adjustment up is 320 mm.
Electrical requirements include a mains voltage of 400 V and a frequency of 50 Hz. Safety features include a safety guard or safety door, and the machine complies with European CE standards. The press includes a Sankyo V 76 roller feed and a PC control system model 2000/670, along with a Siegfried Advanced System 289 for tool protection.
The hydraulic press shows signs of use, with some wear marks and paint chipping on the lower front panel, consistent with normal operational conditions. Visible components include a yellow pressing component inside the machine, a control panel with buttons and switches on both front sides, and a touchscreen control panel branded with HAULICK+ROOS on a mobile or standalone unit. A blue coiled air hose and a metallic enclosure housing hydraulic or electrical components are mounted on the side. A yellow warning label is also visible on the side enclosure.
An orange bucket is present on the floor in front of the machine, likely for maintenance or cleaning purposes. The machine and its surrounding area appear clean and well-maintained. This hydraulic press is offered as-is and where-is, with no additional guarantees provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 99 |
| Last activity | April 14, 2026 |
ProdEq Trading GmbH is a leading player in the Swiss trading landscape, specializing in high-quality equipment and solutions tailored for various industries. With a commitment to excellence and innovation, ProdEq has established itself as a trusted partner for businesses seeking reliable and efficient products. Their extensive portfolio includes cutting-edge machinery, tools, and accessories designed to meet the diverse needs of their clients. At the heart of ProdEq's operations is a dedication to customer satisfaction. The company prides itself on understanding the unique requirements of each client, ensuring that they receive personalized service and expert guidance. This customer-centric approach not only fosters long-term relationships but also positions ProdEq as a go-to resource for businesses looking to enhance their operational efficiency. In addition to their impressive product offerings, ProdEq Trading GmbH is committed to sustainability and responsible sourcing. They prioritize environmentally friendly practices in their supply chain, ensuring that their products not only perform exceptionally but also contribute to a greener future. With a strong foundation built on integrity, quality, and innovation, ProdEq Trading GmbH is poised to continue its growth and success in the competitive trading market. Whether you are a small business or a large corporation, ProdEq is ready to support your needs with unparalleled expertise and a comprehensive range of solutions.
Хидравлична преса HAULICK+ROOS RSH 630-1250
Hydraulický lis HAULICK+ROOS RSH 630-1250
HAULICK+ROOS RSH 630-1250 Hydraulisk presse
HAULICK+ROOS RSH 630-1250 Hydraulische Presse
Υδραυλική πρέσα HAULICK+ROOS RSH 630-1250
HAULICK+ROOS RSH 630-1250 Hydraulic press
Prensa hidráulica HAULICK+ROOS RSH 630-1250
Presse hydraulique HAULICK+ROOS RSH 630-1250
Hidraulična preša HAULICK+ROOS RSH 630-1250
HAULICK+ROOS RSH 630-1250 Hidraulikus prés
Pressa idraulica HAULICK+ROOS RSH 630-1250
HAULICK+ROOS RSH 630-1250 Hidraulinis presas
HAULICK+ROOS RSH 630-1250 Hydraulische pers
Prasa hydrauliczna HAULICK+ROOS RSH 630-1250
Prensa hidráulica HAULICK+ROOS RSH 630-1250
Presă hidraulică HAULICK+ROOS RSH 630-1250
HAULICK+ROOS RSH 630-1250 Гидравлический пресс
Hidraulična presa HAULICK+ROOS RSH 630-1250
HAULICK+ROOS RSH 630-1250 Hydraulpress
Hidrolik pres HAULICK+ROOS RSH 630-1250
EN
- Languages
English (GB)