HACO TSX 3006 hydraulic shear
|Cutting length||3050.0 mm|
|Max. thickness||6.0 mm|
|Max cutting angle||3 °|
|Min cutting angle||0.5 °|
|Back gauge type|
|Length x width x height||3880.0 mm × 2660.0 mm × 1700.0 mm|
|Hours under power|
|At local norms||---------|
This HACO shear is renowned for being well built, reliable and accurate.
With a capacity of 3050x 6mm (steel 40kg), this shear is suitable for both precision and heavy industries, unit manufacturing and mass production.
Adjusting the angle of cut and positioning the clearance between the blades makes it possible to quickly adjust the machine to each thickness and quality of the sheet to be cut.
This machine is equipped as standard with:
A power unit with pump motor located at the back of the machine and easily accessible
2 hydraulic cylinders pulling down.
An adjustable cutting angle by electro-hydraulic control with pushbuttons
All functions are grouped on the left side of the machine, facing the operator
Quick automatic adjustment of blade clearance on the TSX version
Greenhouses with buffers. The pressure of the green sheet cylinders is independent of the shearing pressure to ensure optimum clamping of each sheet thickness. Tole green cylinders are closer to the left and right ends, facilitating narrow band shearing
Protection against electrical and hydraulic overload
Rear stop with a 750mm stroke consisting of 2 rigid arms and an adjustable angle.
Table equipped with rectangular consoles to facilitate the introduction of sheets
Mobile control pedal
Steel capacity (400N / mm² 6 mm
Cutting length 3050 mm
Adjusting the cutting angle 0.5 to 3 °
Number of greenhouses 18
Rates 8 to 14 cps / min
Front arm length 1000 mm
Back stop stroke 750 mm
Working height 770 mm
Engine power hydraulic group 7.5 mm
Length 3880 mm
Width (without grid) 1650 mm
Width (with grid) 2660 mm
Height 1700 mm
Weight 4500 kg
Please note that this description may have been translated automatically. Contact us for further information.