Price on request
Make an offer| Cutting length | 3050 mm |
| Max. thickness | 12 mm |
| Max cutting angle | 3 ° |
| Min cutting angle | 1 ° |
| Back gauge type | Manual Backgauge |
| Backgauge adjustment | 750 mm |
| ------------------- | |
| Length x width x height | 3800.0 × 2100.0 × 2200.0 |
| Weight | 8000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 03/03/2026 |
This HACO HS 3012 hydraulic guillotine shear is designed for cutting metal sheets with a maximum thickness capacity of 12 mm and a maximum cutting length of 3050 mm. The machine features a manual back gauge with an adjustment range of 750 mm, allowing for precise positioning of the material during cutting operations. The cutting angle is adjustable between 1° and 3°, enabling angled cuts as required.
The hydraulic control system powers the shear, supported by a 30 hp motor, providing reliable and consistent cutting performance. The machine operates at speeds ranging from 10 to 20 strokes per minute, suitable for various production demands.
The shear measures approximately 3800 mm in length, 2100 mm in width, and 2200 mm in height, with a total weight of 8000 kg, indicating a robust industrial design.
Visible features include a large green frame equipped with a roller conveyor table on the front side, facilitating material handling. The control panel is located on the left side of the machine and contains multiple buttons, key switches, and indicator lights, including high voltage warning symbols for safety awareness. The control panel shows some wear and scratches, consistent with prior use.
Safety guards and metal support structures are present around the machine, including an orange safety guard on the side. Some hydraulic components, electrical wiring, and the motor are visible inside the machine enclosure, with signs of dirt and wear on various surfaces, reflecting typical workshop usage conditions.
Overall, this HACO HS 3012 hydraulic guillotine shear is a substantial and well-equipped machine suitable for industrial metal cutting applications, with manual back gauge adjustment and hydraulic operation for efficient and precise cutting.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Maximum thickness 12 mm
Maximum length 3050 mm
Rear gauge capacity 750 mm
Cutting angle 1° to 3°
Manual between-blade clearance adjustment mm
Speed 10 to 20 strokes/min
Hydraulic control yes
Motor 30 hp
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2005 |
| Offers online | 34 |
| Last activity | March 10, 2026 |
N2C is a French company specializing in the sale, retrofitting, purchase, repair, and safety enhancement of metalworking machinery. Established in 2004, N2C has built a reputation for excellence and innovation in the industry. Their expertise encompasses a wide range of machines, including press brakes, shears, punching machines, rollers, lathes, milling machines, and machining centers. N2C's commitment to sustainability is evident through their eco-design approach, which has led to a 77% reduction in carbon footprint by reusing 95% of the machine components. This process not only conserves energy but also minimizes waste, aligning with their dedication to environmental responsibility. The company offers comprehensive services such as predictive maintenance, machine retrofitting kits, and the supply of new machines tailored to clients' specific needs. Their clientele spans various sectors, including aerospace, automotive, energy, defense, construction, metallurgy, and food processing. With over 15 years of experience, N2C continues to deliver high-quality solutions that enhance productivity and extend the lifespan of metalworking machinery.
Maximum thickness 12 mm
Maximum length 3050 mm
Rear gauge capacity 750 mm
Cutting angle 1° to 3°
Manual between-blade clearance adjustment mm
Speed 10 to 20 strokes/min
Hydraulic control yes
Motor 30 hp
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Cutting length | 3050 mm |
| Max. thickness | 12 mm |
| Max cutting angle | 3 ° |
| Min cutting angle | 1 ° |
| Back gauge type | Manual Backgauge |
| Backgauge adjustment | 750 mm |
| ------------------- | |
| Length x width x height | 3800.0 × 2100.0 × 2200.0 |
| Weight | 8000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | visible |
| Last availability date | 03/03/2026 |
This HACO HS 3012 hydraulic guillotine shear is designed for cutting metal sheets with a maximum thickness capacity of 12 mm and a maximum cutting length of 3050 mm. The machine features a manual back gauge with an adjustment range of 750 mm, allowing for precise positioning of the material during cutting operations. The cutting angle is adjustable between 1° and 3°, enabling angled cuts as required.
The hydraulic control system powers the shear, supported by a 30 hp motor, providing reliable and consistent cutting performance. The machine operates at speeds ranging from 10 to 20 strokes per minute, suitable for various production demands.
The shear measures approximately 3800 mm in length, 2100 mm in width, and 2200 mm in height, with a total weight of 8000 kg, indicating a robust industrial design.
Visible features include a large green frame equipped with a roller conveyor table on the front side, facilitating material handling. The control panel is located on the left side of the machine and contains multiple buttons, key switches, and indicator lights, including high voltage warning symbols for safety awareness. The control panel shows some wear and scratches, consistent with prior use.
Safety guards and metal support structures are present around the machine, including an orange safety guard on the side. Some hydraulic components, electrical wiring, and the motor are visible inside the machine enclosure, with signs of dirt and wear on various surfaces, reflecting typical workshop usage conditions.
Overall, this HACO HS 3012 hydraulic guillotine shear is a substantial and well-equipped machine suitable for industrial metal cutting applications, with manual back gauge adjustment and hydraulic operation for efficient and precise cutting.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2005 |
| Offers online | 34 |
| Last activity | March 10, 2026 |
N2C is a French company specializing in the sale, retrofitting, purchase, repair, and safety enhancement of metalworking machinery. Established in 2004, N2C has built a reputation for excellence and innovation in the industry. Their expertise encompasses a wide range of machines, including press brakes, shears, punching machines, rollers, lathes, milling machines, and machining centers. N2C's commitment to sustainability is evident through their eco-design approach, which has led to a 77% reduction in carbon footprint by reusing 95% of the machine components. This process not only conserves energy but also minimizes waste, aligning with their dedication to environmental responsibility. The company offers comprehensive services such as predictive maintenance, machine retrofitting kits, and the supply of new machines tailored to clients' specific needs. Their clientele spans various sectors, including aerospace, automotive, energy, defense, construction, metallurgy, and food processing. With over 15 years of experience, N2C continues to deliver high-quality solutions that enhance productivity and extend the lifespan of metalworking machinery.
HACO HS 3012
Hydraulické nůžky / gilotiny HACO HS 3012
HACO HS 3012
HACO HS 3012 Hydraulische Blechschere
HACO HS 3012
HACO HS 3012 hydraulic shear
Cizalla guillotina hidráulica HACO HS 3012
Cisaille guillotine hydraulique HACO HS 3012
HACO HS 3012
HACO HS 3012
Cesoia ghigliottina idraulica HACO HS 3012
HACO HS 3012
HACO HS 3012
Nożyce gilotynowe hydrauliczne HACO HS 3012
HACO HS 3012
HACO HS 3012
HACO HS 3012 Гидравлические гильотинные ножницы
HACO HS 3012
HACO HS 3012
Hidrolik giyotin makas HACO HS 3012
EN
- Languages
English (GB)