HAAS VF2 SS Machining center - vertical Good value

Power on hours: approx. 2420 h
Spindle hours : approx. 700 h
TRAVELS
X Axis 762 mm
Y Axis 406 mm
Z Axis 508 mm
Spindle Nose to Table (~ max) 610 mm
Spindle Nose to Table (~ min) 102 mm
SPINDLE
Max Rating 30.0 hp / 22.4 kW
Max Speed 12000 rpm
Max Torque 122.0 Nm at 2000 rpm
Drive System Inline Direct-Drive
Taper BT 40
Bearing Lubrication Air / Oil Injection
Cooling Liquid Cooled Liquid Cooled
TABLE
Length 914 mm
Width 356 mm
Max Weight on Table 680 kg
FEEDRATES
Max Cutting 21.2 m/min
Rapids on X 35.6 m/min
Rapids on Y 35.6 m/min
Rapids on Z 35.6 m/min
TOOL CHANGER
Type SMTC
Capacity 30+1
Max Tool Diameter (full) 64 mm
Max Tool Diameter (adjacent empty) 127 mm
Max Tool Length (from gage line) 279 mm
Max Tool Weight 5.4 kg
Tool-to-Tool (avg) 1.8 s
Chip-to-Chip (avg) 2.4 s
GENERAL
Coolant Capacity 208 L
AIR REQUIREMENTS
Air Required 113 L/min at 6.9 bar
Air Pressure Min 80 psi / 5.5 bar
DIMENSIONS - SHIPPING 249 cm x 232 cm x 254 cm
Weight 3539.0 kg
Drive System Inline Direct-Drive
Spindle Power 30.0 hp 22.4 kW
Input AC Voltage (3 Phase) - Low 220 VAC
Full Load Amps (3 Phase) 70 A
Accessories
High Speed High feed drives
12.000 rpm spindle
1,5 year warranty expiring in 2022
Automatic cabinet door
4rth axis ready