Price on request
Make an offer| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 06/04/2026 |
This listing is for a 200-ton DAKE "H"-Frame Traveling-Head Hydraulic Straightening Press, model 19-525. The press features a robust "H"-frame design with the DAKE brand prominently displayed on the top beam. It is equipped with a central pressing cylinder supported by a large cylindrical container and a substantial round base plate beneath the cylinder, designed to handle heavy-duty straightening tasks.
The machine includes a comprehensive control system with pushbuttons and controls for fast and slow ram movements (down and up), frame forward and reverse travel, frame locking and unlocking, as well as start and stop functions. The control panel is mounted on the right side of the frame and consists of two vertically stacked control boxes with various pushbuttons and indicator lights, including emergency stop functions. The panel shows some wear and discoloration, consistent with industrial use.
Access to the upper parts of the press is facilitated by a metal safety railing and ladder located on the left side, providing safe maintenance and operational access. The press also features a bell housing and a removable work support table.
Specifications include a maximum stroke length of 40 inches, daylight to ram ranging from 90 to 130 inches, and a distance of 78 inches between housings. Ram speeds vary by function, with pressing speed at 8 inches per minute, advance speed at 115 inches per minute, return speed at 300 inches per minute, and breakaway speed at 20 inches per minute. The head travel speed is 28 feet per minute. It is powered by a 25 HP motor and operates on a 460V, 3-phase, 60 Hz electrical system.
The machine shows signs of use such as some surface rust on the cylinder and general wear and dirt, but no visible structural damage. The floor area around the machine is clean, indicating it has been maintained in an industrial environment. This press is suitable for heavy-duty hydraulic straightening applications requiring precise control and substantial tonnage capacity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
200 TON DAKE "H"-FRAME TRAVELING-HEAD HYDRAULIC STRAIGHTENING PRESS
MODEL 19-525,
EQUIPPED WITH:
PUSHBUTTONS & CONTROLS CONSISTING OF: FAST DOWN,
SLOW DOWN, FAST RAISE, FRAME FORWARD, SLOW RAISE,
LOCK FRAME, FRAME REVERSE, UNLOCK FRAME, FAST DOWN,
SLOW DOWN, START, STOP.
HYDRAULIC GAUGE
BELL HOUSING & WORK SUPPORT TABLE (REMOVEABLE)
CONDITION: APPEARS TO BE IN GOOD CONDITION
AS TAKEN FROM SERVICE.
Specifications
Model 19-525
Condition Used
Tonnage capacity 200 TON
Stroke length, maximum 40"
Daylight to ram, maximum 130"
Daylight to ram, minimum 90"
Distance between housings 78"
Ram speed, pressing 8 IPM
Ram speed, advance 115 IPM
Ram speed, return 300 IPM
Ram speed, breakaway 20 IPM
Head travel, speed 28 FPM
Motor horsepower 25 HP
Electrical system 460/3/60
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 45 |
| Last activity | April 18, 2026 |
200 TON DAKE "H"-FRAME TRAVELING-HEAD HYDRAULIC STRAIGHTENING PRESS
MODEL 19-525,
EQUIPPED WITH:
PUSHBUTTONS & CONTROLS CONSISTING OF: FAST DOWN,
SLOW DOWN, FAST RAISE, FRAME FORWARD, SLOW RAISE,
LOCK FRAME, FRAME REVERSE, UNLOCK FRAME, FAST DOWN,
SLOW DOWN, START, STOP.
HYDRAULIC GAUGE
BELL HOUSING & WORK SUPPORT TABLE (REMOVEABLE)
CONDITION: APPEARS TO BE IN GOOD CONDITION
AS TAKEN FROM SERVICE.
Specifications
Model 19-525
Condition Used
Tonnage capacity 200 TON
Stroke length, maximum 40"
Daylight to ram, maximum 130"
Daylight to ram, minimum 90"
Distance between housings 78"
Ram speed, pressing 8 IPM
Ram speed, advance 115 IPM
Ram speed, return 300 IPM
Ram speed, breakaway 20 IPM
Head travel, speed 28 FPM
Motor horsepower 25 HP
Electrical system 460/3/60
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 06/04/2026 |
This listing is for a 200-ton DAKE "H"-Frame Traveling-Head Hydraulic Straightening Press, model 19-525. The press features a robust "H"-frame design with the DAKE brand prominently displayed on the top beam. It is equipped with a central pressing cylinder supported by a large cylindrical container and a substantial round base plate beneath the cylinder, designed to handle heavy-duty straightening tasks.
The machine includes a comprehensive control system with pushbuttons and controls for fast and slow ram movements (down and up), frame forward and reverse travel, frame locking and unlocking, as well as start and stop functions. The control panel is mounted on the right side of the frame and consists of two vertically stacked control boxes with various pushbuttons and indicator lights, including emergency stop functions. The panel shows some wear and discoloration, consistent with industrial use.
Access to the upper parts of the press is facilitated by a metal safety railing and ladder located on the left side, providing safe maintenance and operational access. The press also features a bell housing and a removable work support table.
Specifications include a maximum stroke length of 40 inches, daylight to ram ranging from 90 to 130 inches, and a distance of 78 inches between housings. Ram speeds vary by function, with pressing speed at 8 inches per minute, advance speed at 115 inches per minute, return speed at 300 inches per minute, and breakaway speed at 20 inches per minute. The head travel speed is 28 feet per minute. It is powered by a 25 HP motor and operates on a 460V, 3-phase, 60 Hz electrical system.
The machine shows signs of use such as some surface rust on the cylinder and general wear and dirt, but no visible structural damage. The floor area around the machine is clean, indicating it has been maintained in an industrial environment. This press is suitable for heavy-duty hydraulic straightening applications requiring precise control and substantial tonnage capacity.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 45 |
| Last activity | April 18, 2026 |
Хидравлична преса "H"-Frame 19-525
Hydraulický lis "H"-Frame 19-525
"H"-Frame 19-525 Hydraulisk presse
"H"-Frame 19-525 Hydraulikpresse
Υδραυλική πίεση "H"-Frame 19-525
Used 200 TON DAKE "H"-FRAME TRAVELING-HEAD HYDRAULIC STRAIGHTENING PRESS
Prensa hidráulica "H"-Frame 19-525
Presse hydraulique "H"-Frame 19-525
Hidraulična preša "H"-Frame 19-525
"H"-Frame 19-525 Hidraulikus nyomás
Pressa idraulica "H"-Frame 19-525
Hidraulinis presas "H"-Frame 19-525
"H"-Frame 19-525 Hydraulische pers
Prasa hydrauliczna "H"-Frame 19-525
Pressão hidráulica "H"-Frame 19-525
Presa hidraulica "H"-Frame 19-525
"H"-Frame 19-525 Гидравлический пресс
Hidraulična presa "H"-Frame 19-525
"H"-Frame 19-525 Hydraulisk press
Hidrolik Pres "H"-Frame 19-525
EN
- Languages
English (GB)